Towards an integrated neonatal brain and cardiac examination capability at 7 T: electromagnetic field simulations and early phantom experiments using an 8-channel dipole array

Objective

Neonatal brain and cardiac imaging would benefit from the increased signal-to-noise ratio levels at 7 T compared to lower field. Optimal performance might be achieved using purpose designed RF coil arrays. In this study, we introduce an 8-channel dipole array and investigate, using simulations, its RF performances for neonatal applications at 7 T.

Methods

The 8-channel dipole array was designed and evaluated for neonatal brain/cardiac configurations in terms of SAR efficiency (ratio between transmit-field and maximum specific-absorption-rate level) using adjusted dielectric properties for neonate. A birdcage coil operating in circularly polarized mode was simulated for comparison. Validation of the simulation model was performed on phantom for the coil array.

Results

The 8-channel dipole array demonstrated up to 46% higher SAR efficiency levels compared to the birdcage coil in neonatal configurations, as the specific-absorption-rate levels were alleviated. An averaged normalized root-mean-square-error of 6.7% was found between measured and simulated transmit field maps on phantom.

Conclusion

The 8-channel dipole array design integrated for neonatal brain and cardiac MR was successfully demonstrated, in simulation with coverage of the baby and increased SAR efficiency levels compared to the birdcage. We conclude that the 8Tx-dipole array promises safe operating procedures for MR imaging of neonatal brain and heart at 7 T.

     

Cooperation of Ito cells and hepatocytes in the deposition of an extracellular matrix in vitro

Cellular and molecular mechanisms involved in the deposition of extracellular matrix components in both normal and fibrotic liver are still poorly understood. We have investigated the influence of cooperation between Ito cells and hepatocytes in matrix deposition in vitro. Immunoprecipitation of radiolabeled proteins from media of 5-day-old Ito cell primary cultures showed that these cells secreted high levels of the major basement membrane components, ie, collagen IV, laminin, and entactin/nidogen. By immunocytochemistry, precursors of basement membrane components were found intracellularly, but only scarce deposits were seen around the cells. When hepatocytes were added to 2-day-old Ito cell primary cultures, they established close contacts with Ito cells in less than 24 hours and expressed ZO-1, a tight junction-associated protein not detectable in standard hepatocyte culture. Cytochemistry analysis revealed an abundant extracellular matrix deposited over hepatocyte cords and between hepatocytes and Ito cells. Immunocytochemistry studies showed that this matrix contained laminin, fibronectin, and collagens proIII and IV. These data indicate that a high level of matrix protein synthesis by liver cells in vitro is not sufficient to induce extracellular matrix deposition, and that cell-cell interactions are strongly involved in this process. Hepatocyte/Ito cell co-culture, which may reflect the actual situation in vivo, represents a useful tool for studying liver fibrogenesis.     

A mouse mutant strain highly resistant to methyl beta-carboline-3-carboxylate-induced seizures

It is believed that DOPA-negative melanocytes in the outer root sheath of the human hair follicle are activated, become identifiable by DOPA staining, and migrate into the epidermis during the repigmenting phase of vitiligo. These cells are difficult to identify, however, and otherwise have not been characterized. These cells are readily identified by immunofluorescence, immunohistochemistry, and immunoelectronmicroscopy using the antibodies NKI/beteb and A4F11, which recognize premelanosome-related antigens. The majority of the outer root sheath melanocytes were found in the mid to the upper portion of the hair follicle. Double staining revealed that these cells were distinct from HLA-DR-bearing dendritic cells. Further immunohistochemical investigation using alpha-PEP-7, alpha-PEP-1, or TMH-1 and alpha-PEP-8 antibodies revealed that outer root sheath melanocytes cannot be identified by antibodies to tyrosinase, TRP-1, or TRP-2, respectively. These cells also did not react with HMB45 antibody, which recognizes a melanosome-associated cytoplasmic antigen. We believe that the inactive outer root sheath melanocytes contain some of the early structural proteins but not any of the enzymatic proteins necessary for melanogenesis. Therefore, activation is the process whereby outer root sheath melanocytes acquire all of the structural and enzymatic proteins necessary for melanogenesis.     

Wearable cognitive assistants in a factory setting: a critical review of a promising way of enhancing cognitive performance and well-being

Cognition, Technology & Work - Rapid technological innovations are constantly influencing the complexification and automatization of the work lines pushing human operators to use diverse...     

Team cognition in a cyber defense context: focus on social support behaviors

In the face of increasingly prominent cyber security issues, the organization of cyber team analysts has become crucial to thwart cyber threats. Few studies have examined the functioning of the team and the interaction between individuals in a cyber defense context and how the context influences team adaptation. The present study investigates team cognition in a cyber defense context and in particular the nature of task- or team-centered communication among analysts during a cyber defense simulation exercise. Results indicate that markers of situation assessment and shared mental models are both strategically present and linked. Nevertheless, the frequency of these markers varies depending on the quantity and quality of problems encountered; in particular, variations in social support behaviors are observed. Decreasing social support behaviors during high level activities suggests the adaptation of social behaviors depending on the threats and attacks on the system. Theoretical and practical implications are discussed in terms of theories and potential consequences for strategic adaptation and team resilience.

     

Dynamic Model Adaptation for Multiscale Simulation of Hyperbolic Systems with Relaxation

In numerous industrial CFD applications, it is usual to use two (or more) different codes to solve a physical phenomenon: where the flow is a priori assumed to have a simple behavior, a code based on a coarse model is applied, while a code based on a fine model is used elsewhere. This leads to a complex coupling problem with fixed interfaces. The aim of the present work is to provide a numerical indicator to optimize to position of these coupling interfaces. In other words, thanks to this numerical indicator, one could verify if the use of the coarser model and of the resulting coupling does not introduce spurious effects. In order to validate this indicator, we use it in a dynamical multiscale method with moving coupling interfaces. The principle of this method is to use as much as possible a coarse model instead of the fine model in the computational domain, in order to obtain an accuracy which is comparable with the one provided by the fine model. We focus here on general hyperbolic systems with stiff relaxation source terms together with the corresponding hyperbolic equilibrium systems. Using a numerical Chapman–Enskog expansion and the distance to the equilibrium manifold, we construct the numerical indicator. Based on several works on the coupling of different hyperbolic models, an original numerical method of dynamic model adaptation is proposed. We prove that this multiscale method preserves invariant domains and that the entropy of the numerical solution decreases with respect to time. The reliability of the adaptation procedure is assessed on various 1D and 2D test cases coming from two-phase flow modeling.     

Angular displacement fiber-optic sensor: theoretical and experimental study

An optical-fiber sensor based on twist-induced optical activity has been developed for measuring angular displacements at low temperature. The sensing part is composed of a fiber coil rotated between two points, which induces a twist of two sections of fiber. A theoretical study of the evolution of a general input state of polarization in the sensor gave us its main characteristics. Then experimental investigations permitted the construction of a sensor to take angular measurements over a 100-deg range with an accuracy of 0.2 deg. The thermal sensitivity of this kind of sensor is also briefly reported.     

An overview of depth cameras and range scanners based on time-of-flight technologies

Time-of-flight (TOF) cameras are sensors that can measure the depths of scene points, by illuminating the scene with a controlled laser or LED source and then analyzing the reflected light. In this paper, we will first describe the underlying measurement principles of time-of-flight cameras, including: (1) pulsed-light cameras, which measure directly the time taken for a light pulse to travel from the device to the object and back again, and (2) continuous-wave-modulated light cameras, which measure the phase difference between the emitted and received signals, and hence obtain the travel time indirectly. We review the main existing designs, including prototypes as well as commercially available devices. We also review the relevant camera calibration principles, and how they are applied to TOF devices. Finally, we discuss the benefits and challenges of combined TOF and color camera systems.     

A Declarative Approach to Network Device Configuration Correctness

Configuration Logic (CL) is a formal language that allows a network engineer to express constraints in terms of the actual parameters found in the configuration of network devices. We present an efficient algorithm that can automatically check a pool of devices for conformance to a set of CL constraints; moreover, this algorithm can point to the part of the configuration responsible for the error when a constraint is violated. Contrary to other validation approaches that require dumping the configuration of the whole network to a central location in order to be verified, we also present an algorithm that analyzes the correct formulas and greatly helps reduce the amount of data that need to be transferred to that central location, pushing as much of the evaluation of the formula locally on each device. The procedure is also backwards-compatible, in such a way that a device that does not (or only partially) supports a local evaluation may simply return a subset or all of its configuration. These capabilities have been integrated into a network management tool called ValidMaker.     

Ultrasonic measurements of microelectronic resins

The elastic moduli, measured with the ultrasonic technique, of commercial silica filled epoxy resins used in the electronic circuits are reported. Measurements of velocity propagation and attenuation were carried out in large temperature and frequency ranges. Predictions of the theoretical models were compared with the experimental values. Explicit expressions of the elastic moduli were derived as functions of filler content and the properties of the matrix and the fillers. The influences of frequency and temperature on the elastic moduli and attenuation are discussed.