High performance of silicided silicon-sidewall source and drain (S4D) structure

A silicided silicon-sidewall source and drain (S⁴D) structure is proposed for sub-0.1-μm devices. The merit of the S⁴D structure is that the series resistance of the source and drain is significantly reduced since the silicide layer is attached very close to the gate electrode and the silicon sidewall can be doped very highly. Thus, very high drain current drive can be expected, Another advantage of this structure is that the source and drain extensions are produced by the solid-phase diffusion of boron from the highly doped silicon-sidewall. Thus, shallow extensions with very high doping can be realized. A 75-nm gate length pMOSFET fabricated with this structure is shown to exhibit excellent electrical characteristics     

Bayesian Availability Using Gamma Distributed Priors

Classical statistical estimation techniques have limited usage in predicting system availability when a system, e.g., a computer or telecommunications system, is highly reliable. A Bayesian solution is suggested in this paper. Gamma priors, which are rich in shapes, are assigned to the scale parameters of a gamma distributed component on-time and off-time. Estimation of the gamma priors follows engineer's past experiences for reliability modeling. Both steady-state and instantaneous availabilities are derived using Bayes Theorem. An illustration highlights the assessment and evaluation of the proposed availability measure.     

Muscular fatigue and maximum endurance time assessment for male and female industrial workers

A single arm pushing experiment was conducted in an electronic factory in Yantai, China to assess muscular fatigue using the theoretical models of muscular strength and maximum endurance time (MET) developed by Ma et al. (2009). Seventy seven workers, including 38 males and 39 females, participated in the study. The muscular strength of pushing was measured after the subject pushed a stick, with a force of 2.5 kgf, for 0.5, 1.0, 1.5, 2.0, 2.5, and 3.0 min. Fatigue rate was determined based on a regression approach. In addition to the theoretical model, the MET for such a pushing task was also determined using four empirical models in the literature. The results indicated that females were more resistant to muscular fatigue than males in the pushing task. The results of the muscular strength prediction show that the predictability of the muscular strength model is acceptable. The prediction errors for muscular strength for female subjects were significantly lower than those of the male subjects. The predicted MET using the theoretical model, with a group constant k, was highly correlated with those using the empirical models compared in the current study.     

Alcohol-induced changes of {beta}-lactoglobulin - retinol-binding stoichiometry

It has been demonstrated using CD that ethanol induces importantsecondary structure changes of ß-lactoglobulin. CDspectra indicate that ß-lactoglobulin secondary structure,which is mainly composed of ß-strands, becomes mostly-helical under the influence of the solvent polarity changes.The midpoint of ß-strand/-helix transition in ß-lactoglobulinis observed at dielectric constant {small tilde}60 (35% ethanol;v/v). According to CD measurements, the ethanol-dependent secondarystructure changes are reversible. The alkylation of lysines-NH₂ in ß-lactoglobulin weakens the central ß-barrelstructure, since the ß-strand/-helix transition midpointof alkylated ß-lactoglobulin is shifted to lower ethanolconcentration (25% ethanol; v/v). ß-Lactoglobulinstructural changes are triggering the dissociation of the ß-lactoglobulin- retinol complex as judged from complete quenching of its fluorescencein ethanol concentration >30% (v/v). However, in 20% ethanol(v/v), ß-lactoglobulin still retains most of its nativesecondary structure as shown by CD and, in this condition, oneß-lactoglobulin molecule binds an additional secondretinol molecule. This suggests that the highly populated speciesobserved around 20% ethanol (v/v) might represent an intermediatestate able to bind two molecules of retinol.     

Perception of Hand Force in Power Grip for Females

Borg's rating of perceived exertion (RPE) and category ratio (CR‐10) scales are commonly used to quantify perceived muscular exertion for body segments. Twenty females participated in an experiment to study the power grip force at four perceived exertion levels using either dominant or nondominant hand under two posture conditions. It was found that the subjects tended to apply a higher power grip force (100% of perceived maximum voluntary contraction) than the levels they were requested to apply. The power grip forces between dominant and nondominant hands at low hand exertion levels were negligible. The grip forces between the two hands were significantly different when the exertion level was nearly maximal. Linear regression models were established for the subjects to link the relationship between the perceived hand exertion and measured grip force, hand used, and hand/arm posture. All the models were statistically significant (p < 0.0001) with R² values 0.97 or higher. These models provided better estimates in perceived hand exertion for dominant hand than for nondominant hand. A follow‐up experiment was conducted to measure the subjective rating of both the CR‐10 and RPE when a 98 N grip force was applied. It was found that the subjects reported higher exertion levels when they were using the CR‐10 scale than when they were using the RPE scale. © 2011 Wiley Periodicals, Inc.     

一种基于图像的非均匀单散射参与介质建模方法

针对非均匀单散射参与介质建模问题,提出一种能够保持密度场空间变化细节的建模方法.使用体数据、吸收和散射系数之比分别描述参与介质空间变化的密度分布及光线在其内部的传输特性,通过构建采集图像像素值与它们之间的表达式,将建模问题转化为非线性数值优化问题,求最优解.为了解决高分辨率体数据下大量体素密度值同时求解带来的时间开销大及数值不稳定问题,提出一种符合采集图像像素值明暗分布规律的密度场体数据初始化算法和一种多分辨率体数据逐步求精优化算法;为了快速计算大量体素密度值梯度,提出一种基于GPU的多体素并行梯度计算算法.实验结果表明,提出的方法能够根据采集图像重构烟模型,并保持其细节信息.     

Image-based modeling of inhomogeneous single-scattering participating media

We propose a method to reconstruct inhomogeneous single-scattering participating media, which could preserve fine high-frequency details of density field.Volumetric data and the ratio of absorption coefficient to scattering coefficient are used to describe the spatial-varying density distribution and optical properties of certain participating media, and a function between the above parameters and captured pixel values is built.Thus the problem of how to find solutions to these parameters is formulated into...     

Automatically generated parallel treebanks and their exploitability in machine translation

Given much recent discussion and the shift in focus of the field, it is becoming apparent that the incorporation of syntax is the way forward for improvements to the current state-of-the-art in machine translation (MT). Parallel treebanks are a relatively recent innovation and appear to be ideal candidates for MT training material. However, until recently there has been no other means to build them than by hand. In this paper, we describe how we make use of new tools to automatically build a large parallel treebank and extract a set of linguistically-motivated phrase pairs from it. We show that adding these phrase pairs to the translation model of a baseline phrase-based statistical MT (PB-SMT) system leads to significant improvements in translation quality. Following this, we describe experiments in which we exploit the information encoded in the parallel treebank in other areas of the PB-SMT framework, while investigating the conditions under which the incorporation of parallel treebank data performs optimally. Finally, we discuss the possibility of exploiting automatically-generated parallel treebanks further in syntax-aware paradigms of MT.