含煤盆地深层“超饱和”煤层气形成条件

中国深层煤层气资源丰富，但总体勘探和认识程度较低，尚未形成较为系统的深层煤层气地质理论。通过解剖分析准噶尔盆地白家海凸起和鄂尔多斯盆地临兴区块深层"超饱和"煤层气井的试气/生产动态，估算原地游离气的含气量，分析了深层"超饱和"煤层气的形成条件。研究表明：①深层"超饱和"煤层气储层中除吸附气外，还含有原地游离气，用常规试气方法可直接获得气流，煤层气的产出不明显依赖于排水降压；②埋藏超过一定深度，在煤阶和温度的综合作用下，煤的吸附能力将随埋深的继续增加而降低，煤层中吸附气的饱和度有增加的趋势，在达到吸附饱和后，出现原地游离气并形成"超饱和"煤层气，盆地深层具有"超饱和"煤层气形成的优势条件；③由于地温梯度和压力梯度的不同，不同盆地"超饱和"煤层气出现的临界深度不同，异常高压和异常高热流可以降低深层"超饱和"煤层气形成的临界深度；④深层"超饱和"煤层气开发具有大大缩短见气时间、充分利用地层能量和累积产水量低等优势，有望成为未来煤层气勘探开发的一个重要领域。     

FED制作工艺研究

本文介绍了我们开发的ＦＥＤ工艺，包括；硅锥场致发射阵列的制作，栅极制作，阳极支柱的制作和平板透明真空封装，对工艺中的难点及对策作了详细描述。利用上述工艺，已经制成了平板数码管，其栅阴特性理想，阳阴之间也能测得明显的场致发射特性产伴有荧光激发。     

羊皮服装革的弯曲应力松弛性能及其与(手感)弹性之关系研究

本文研究了羊皮服装革的弯曲应力衰减性能。对应力衰减常数（αｂ）及其与羊皮服装革手感弹性的关系进行了讨论。结果表明：αｂ与革的手感弹性相关。αｂ值定量反映出革的手感弹性优劣。     

Survivability-oriented optimal node density for randomly deployed wireless sensor networks

The survivability is usually critical for wireless sensor networks,which are often deployed in the unattended harsh environment.Lots of technical schemes to improve the survivability depend on the redundant resources of the sensor networks.The amount of resources is usually determined by the node density during the deployment phase.For the random deployment and random node failures,the quantitative relation between the survivability and the node density is studied.Based on the conditional survivability,the node density to meet the required survivability level is presented.Finally,the survivability for unpredictable failures and the optimal node density to maximize the price–performance ratio are also discussed.     

我国页岩气采输技术探析

在阐述目前国内页岩气开发技术现状的基础上,重点分析了页岩气开采中的储层评价技术、储层改造技术、钻井技术、固井技术和地面集输技术,指出我国页岩气采输技术需解决的问题,点明页岩气采输技术的发展方向。     

钛表面辉光等离子无氢渗碳的研究

采用双层辉光离子渗碳技术在本底真空度为 5×10-3Pa 的高真空下,用 99.999%的高纯氩气进行无氢渗碳。在整个工艺过程中,没有涉及到氢元素,实现了无氢渗碳。试样材质为 TA1 工业纯钛,用透射电镜(TEM)观察渗层结构;X 射线衍射(XRD)测定渗层的相组成;用 M200 耐磨试验机测定渗碳试样的耐磨性能;渗碳试样的磨痕表面状态用 TR240型粗糙度仪测定。渗碳层厚度大于 100 μm。表面层生成的是 TiC,基体仍为 α-Ti。近表面渗层维氏硬度为 6 000 MPa,表面的硬度远大于此值。摩擦系数 0.11。纯钛经过无氢渗碳后,与未经过处理的纯钛相比磨损量仅为纯钛试样的1/1 592.5。研究得出:钛材经过双辉等离子无氢渗碳后,不仅提高了表面的硬度,同时降低了摩擦系数,因而使耐磨性能得到了大幅度的提高。     

用双层辉光等离子法在钛表面制备的Ti-Pd合金层性能研究

采用双层辉光等离子冶金技术在纯钛表面制备了Ti—Pd合金层。其深度大约为90μm，Pd含量呈梯度变化，并出现了TiPd3，TiPd2，Ti2Pd3，Ti3Pd5，TiPd，Ti4Pd等6种化合物相和Pd相。合金层在100℃的NaCl饱和溶液＋HCl溶液以及40℃的8．6％H2SO4溶液中的耐缝隙腐蚀性能优于Ti0．2Pd合金；在室温80％H2SO4的溶液中，腐蚀速率仅为0．682mm／a，是Ti0．2Pd合金的18．2％：在室温30％HCl的溶液中，表面Ti—Pd的腐蚀速率仅为0．004mm／a，是Ti0．2Pd合金的12．5％。     

Ultra-Stable and Sensitive Ultraviolet Photodetectors Based on Monocrystalline Perovskite Thin Films

The detection of ultraviolet (UV) radiation with effective performance and robust stability is essential to practical applications. Metal halide single-crystal perovskites (ABX₃) are promising next-generation materials for UV detection. The device performance of all-inorganic CsPbCl₃ photodetectors (PDs) is still limited by inner imperfection of crystals grown in solution. Here wafer-scale single-crystal CsPbCl₃ thin films are successfully grown by vapor-phase epitaxy method, and the as-constructed PDs under UV light illumination exhibit an ultralow dark current of 7.18 pA, ultrahigh ON/OFF ratio of ≈5.22 × 10⁵, competitive responsivity of 32.8 A W⁻¹, external quantum efficiency of 10867% and specific detectivity of 4.22 × 10¹² Jones. More importantly, they feature superb long-term stability toward moisture and oxygen within twenty-one months, good temperature tolerances at low and high temperatures. The ability of the photodetector arrays for excellent UV light imaging is further demonstrated.     

Vapor Phase Growth of Centimeter-Sized Band Gap Engineered Cesium Lead Halide Perovskite Single-Crystal Thin Films with Color-tunable Stimulated Emission

Single crystal metal halide perovskites thin films are considered to be a promising optical, optoelectronic materials with extraordinary performance due to their low defect densities. However, it is still difficult to achieve large-scale perovskite single-crystal thin films (SCTFs) with tunable bandgap by vapor-phase deposition method. Herein, the synthesis of CsPbCl_3(1–x)Br_3x SCTFs with centimeter size (1 cm × 1 cm) via vapor-phase deposition is reported. The Br composition of CsPbCl_3(1–x)Br_3x SCTFs can be gradually tuned from x = 0 to x = 1, leading the corresponding bandgap to change from 2.29 to 2.91 eV. Additionally, an low-threshold (≈23.9 µJ cm⁻²) amplified spontaneous emission is achieved based on CsPbCl_3(1–x)Br_3x SCTFs at room temperature, and the wavelength is tuned from 432 to 547 nm by varying the Cl/Br ratio. Importantly, the high-quality CsPbCl_3(1–x)Br_3x SCTFs are ideal optical gain medium with high gain up to 1369.8 ± 101.2 cm⁻¹. This study not only provides a versatile method to fabricate high quality CsPbCl_3(1–x)Br_3x SCTFs with different Cl/Br ratio, but also paves the way for further research of color-tunable perovskite lasing.