Characterization and electrochemical properties of CF4 plasma-treated boron-doped diamond surfaces

The effect of CF₄ plasma etching on diamond surfaces, with respect to treatment time, was investigated using scanning electron microscopy (SEM), Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), and electrochemical measurements. SEM observations and Raman spectra indicated an increase in surface roughening on a scale of 10–20 nm, and an increase in crystal defect density was apparent with treatment time in the range of 10 s to 30 min. In contrast, alteration of the diamond surface terminations from oxygen to fluorine was found to be rather rapid, with saturation of the F/C atomic ratio estimated from XPS analysis after treatment durations of 1 min and more. The redox kinetics of Fe(CN)₆^3−/4− was also found to be significantly modified after 10 s of CF₄ plasma treatment. This behavior shows that C–F terminations predominantly affect the redox kinetics compared to the effect on the surface roughness and crystal defects. The double-layer capacitance (C_dl) of the electrolyte/CF₄ plasma-treated boron-doped diamond interface was found to show a minimum value at 1 min of treatment. These results indicate that a short-duration CF₄ plasma treatment is effective for the fabrication of fluorine-terminated diamond surfaces without undesirable surface damage.     

Lipid-Lowering Effect of Eriocitrin, the Main Flavonoid in Lemon Fruit, in Rats on a High-Fat and High-Cholesterol Diet

ABSTRACT:  Eriocitrin (eriodictyol 7- O -β-rutinoside) is the main flavonoid in lemon fruit. In this study, eriocitrin was investigated for its lowering effect on serum and hepatic lipids in high-fat and high-cholesterol fed rats. Rats in the control group ( N = 6) were fed a 20% lard and 1% cholesterol diet for 21 d, and rats in the 0.35% eriocitrin group ( N = 6) and 0.70% eriocitrin group ( N = 6) were fed a diet supplemented with eriocitrin 0.35% and 0.70%, respectively. The content of hepatic total cholesterol and triglyceride in the eriocitrin group was no different from that of the control group. The total cholesterol, VLDL+LDL, triglyceride, and phospholipid in the serum of the 0.35% eriocitrin group showed significantly lower concentrations than the control group ( P < 0.05), although there was no difference in the HDL concentrations among the groups. The lowering effect of eriocitrin for serum total cholesterol was thought to be caused by a decrease in VLDL+LDL. The 0.35% eriocitrin group was shown to have a significant increase in excretion of fecal bile acid ( P < 0.05) and a tendency for enhanced hepatic m-RNA levels of LDL receptor in comparison with the control group.     

Radiation damage induced in Si photodiodes by high-temperature neutron irradiation

Results are presented of a detailed study of the effects of high-temperature 4-MeV neutron irradiation on the performance degradation of Si pin photodiodes together with the radiation-induced defects, observed by deep level transient spectroscopy (DLTS). It was found that the dark current increases after irradiation, while the photocurrent decreases. After irradiation, two majority electron capture levels with (E _c–0.22 eV) and (E _c–0.40 eV) were induced in the n-Si substrate, while one minority hole capture level with (E _v+0.37 eV) was found. Additionally, the degradation of the device performance and the introduction rate of the lattice defects decreases with increasing irradiation temperature. For a 250 °C irradiation, the reduction of the reverse current is only 20% of the starting value. This result suggests that the creation and recovery of the radiation damage proceeds simultaneously at high temperatures.     

Average-case analysis of the Modified Harmonic algorithm

In this paper we analyze the average-case performance of the Modified Harmonic algorithm for on-line bin packing. We first analyze the average-case performance for arbitrary distribution of item sizes over (0,1]. This analysis is based on the following result. Letf ₁ andf ₂ be two linear combinations of random variables {N _i } _i=1 ^k where theN _i 's have a joint multinomial distribution for eachn= _i=1 ^k ,N _i . LetE(f ₁) O andE(f ₂) 0. Then lim_n E(max(_{f 1},f ₂ ))/n = lim _n max(E(f ₁),E(f ₂))/n. We then consider the special case when the item sizes are uniformly distributed over (0,1]. For specific values of the parameters, the Modified Harmonic algorithm turns out to be better than the other two linear-time on-line algorithms—Next Fit and Harmonic—in both the worst case as well as the average case. We also obtain optimal values for the parameters of the algorithm from the average-case standpoint. For these values of the parameters, the average-case performance ratio is less than 1.19. This compares well with the performance ratios 1.333. and 1.2865. of the Next Fit algorithm and the Harmonic algorithm, respectively.     

Average-case analysis of the Modified Harmonic algorithm

In this paper we analyze the average-case performance of the Modified Harmonic algorithm for on-line bin packing. We first analyze the average-case performance for arbitrary distribution of item sizes over (0,1]. This analysis is based on the following result. Letf ₁ andf ₂ be two linear combinations of random variables {N _i } _i=1 ^k where theN _i 's have a joint multinomial distribution for eachn=σ _i=1 ^k ,N _i . LetE(f ₁) ≠ O andE(f ₂)≠ 0. Then lim_{n →}∞E(max(_{f 1},f ₂ ))/n = lim _n →∞ max(E(f ₁),E(f ₂))/n. We then consider the special case when the item sizes are uniformly distributed over (0,1]. For specific values of the parameters, the Modified Harmonic algorithm turns out to be better than the other two linear-time on-line algorithms—Next Fit and Harmonic—in both the worst case as well as the average case. We also obtain optimal values for the parameters of the algorithm from the average-case standpoint. For these values of the parameters, the average-case performance ratio is less than 1.19. This compares well with the performance ratios 1.333. and 1.2865. of the Next Fit algorithm and the Harmonic algorithm, respectively.     

Numerical solutions of the singular integral equations in the crack analysis using the body force method

In this paper, numerical solutions of the singular integral equations of the body force method in the crack problems are discussed. The stress fields induced by two kinds of displacement discontinuity are used as fundamental solutions. Then, the problem is formulated as a hypersingular integral equation with the singularity of the form r ². In the numerical calculation, two kinds of unknown functions are approximated by the products of the fundamental density function and the Chebyshev polynomials. As examples, the stress intensity factors of the oblique edge crack, kinked crack, branched crack and zig-zag crack are analyzed. The calculation shows that the present method gives accurate results even for the extremely oblique edge crack and kinked crack with extremely short bend which has been difficult to analyze by the previous method using the approximation by the products of the fundamental density function and the stepped functions etc.     

HMM-based state classification of a user with a walking support system using visual PCA features

The improvement of safety and dependability in systems that physically interact with humans requires investigation with respect to the possible states of the user’s motion and an attempt to recognize these states. In this study, we propose a method for real-time visual state classification of a user with a walking support system. The visual features are extracted using principal component analysis and classification is performed by hidden Markov models, both for real-time fall detection (one-class classification) and real-time state recognition (multi-class classification). The algorithms are used in experiments with a passive-type walker robot called “RT Walker” equipped with servo brakes and a depth sensor (Microsoft Kinect). The experiments are performed with 10 subjects, including an experienced physiotherapist who can imitate the walking pattern of the elderly and people with disabilities. The results of the state classification can be used to improve fall-prevention control algorithms for walking support systems. The proposed method can also be used for other vision-based classification applications, which require real-time abnormality detection or state recognition.     

A PRACTICAL METHOD FOR RECTIFYING INTERFACIAL TENSION DATA TO PREDICT THE SHAPE OF INTERFACES IN AN IMMISCIBLE LIQUID/LIQUID/GAS SYSTEM

The shape of interfaces formed by the contact of two liquid phases, immiscible with each other, and a gaseous phase can be predicted on the condition that the tension to work at each interface is known with a sufficient accuracy. In general, interfacial tension data available are not so accurate, however, as to be useful as they are in predicting the shape of interfaces, particularly when the spreading coefficient of either liquid (liquid 1) on the other (liquid 2) has a negative value of a small magnitude. Presented in this note is a simple method to rectify the interfacial tension data, with the aid of a measurement of the radius of a lens of liquid 1 of a known volume placed on the horizontal surface of liquid 2, and thereby make them usable for predicting interfacial geometries. The method is tested by applying it to benzene/water and n-pentane/water systems.