Accelerator Analysis of Tributyltin Adsorbed onto the Surface of a Tributyltin Resistant Marine Pseudoalteromonas sp. Cell

Tributyltin (TBT) released into seawater from ship hulls is a stable marine pollutant and obviously remains in marine environments. We isolated a TBT resistant marine Pseudoalteromonas sp. TBT1 from sediment of a ship’s ballast water. The isolate (10^{9.3 ± 0.2} colony-forming units mL⁻¹) adsorbed TBT in proportion to the concentrations of TBTCl externally added up to 3 mM, where the number of TBT adsorbed by a single cell was estimated to be 10^8.2. The value was reduced to about one-fifth when the lysozyme-treated cells were used. The surface of ethanol treated cells became rough, but the capacity of TBT adsorption was the same as that for native cells. These results indicate that the function of the cell surface, rather than that structure, plays an important role to the adsorption of TBT. The adsorption state of TBT seems to be multi-layer when the number of more than 10^6.8 TBT molecules is adsorbed by a single cell.     

Breast carcinoma with myeloid metaplasia--a case report

A 49 year-old female had been suffering from primary myelofibrosis since February 1987 without receiving any treatment. In 1994, a breast mass was detected. Breast tumor biopsy revealed tubular carcinoma with intraductal components and multinucleated giant cells in the loose and myxoid stroma. The giant cells were thought to be megakaryocytes because both Factor VIII and platelet glycoprotein GP IIIa were detected in their cytoplasm. While additional mastectomy specimens and the axillary lymph nodes also revealed prominent myeloid metaplasia, there was no proliferation of the cancer cells. Granulocytic series stained for chloroacetate esterase and very few erythrocytic series were observed. This is the first case in which breast carcinoma and myeloid metaplasia coexisted in the same breast tumor.     

An efficient method for developing requirement specifications for plant control software using a component-based software prototype

This paper proposes an efficient method to develop requirement specifications for Plant Control Software (PCSW) using software-component-based prototypes. Prior to this proposal, domain analyses were conducted on existing PCSWs, and their functions were classified into “similar functions” and “individual functions”. Then PCSW Software Components (PSC: PCSW Software Component, PSCs: PCSW Software Components) were developed to correspond to these functions. PSCs as parameter-style components were developed in order to satisfy the clients’ (we define clients as owners, managers and operators of plants) requirements. A support environment for developing requirement specifications was developed. The environment consists of the Prototype Development Tool (PDT), the Behavior Check Simulator (BCS) and the Requirement Specification Development Tool (RSDT). The method consists of four steps. In the first step, PDT is used to define the parameters to customize PSCs and to compose a PCSW prototype by setting these parameters to PSCs. In the second step, BCS is used to execute the composed PCSW prototype and check its behavior and relevancy against the clients’ expectations. In the third step, steps 1 and 2 are repeated until the behavior of the PCSW prototype satisfies the clients’ requirements. Finally, a requirement specification is developed from the PCSW prototype which fully reflects the clients’ requirements. In order to evaluate the proposed method, it has been applied in five development cases. A Requirement Coverage of 91%, a Requirement Revision Rate of 6%, a PSC Reuse Rate of 92% and a LOC Reuse Rate of 83% have been achieved. In addition, a reduction of 55% in the amount of time required to develop requirement specifications has been achieved. These results indicate that the proposed method has sufficient capability to develop an exhaustive and an adequate PCSW requirement specification. And the developed PSCs have sufficient functions and capability to compose PCSW prototypes, and the support environment is capable of shortening the time taken to develop requirement specifications.     

Crystallization of potassium titanate from the amorphous phase

By using amorphous potassium titanates as the starting materials, a sintered body of K₂Ti₄O₉ or K₂Ti₆O₁₃ with porous and fibrous textures was prepared. K₂Ti₂O₅ and a new phase, K₆Ti₄O₁₁ were synthesized by the thermal reaction of KNO₃ with TiO₂ at 1000° C for 10 to 20 h. On leaching in water to expel excess of potassium ions, both phases became amorphous. After mixing and moulding these amorphous materials in the desired proportion, a sintered body containing fibrous crystals of K₂Ti₄O₉ was readily fabricated by heating at 1000° C for 12 h. When 5 wt % B₂O₃ was added to the amorphous phases, single phase K₂Ti₆O₁₃, with a fibrous texture grew well on heating at 1000° C for 12 h. Addition of PVA polymer to the amorphous phases was responsible for controlling the porosity of the sintered body, e.g. about 52% theoretical density at 20 wt% PVA polymer. The optimum conditions for preparing the amorphous phases were systematically examined and the effect of the chemical reaction environments, such as different crucible materials on the calcination of KNO₃ and TiO₂ were also discussed.     

Nickel Electroplating

NICKEL ELECTROPLATING has been practicallyused for decades.There is an unknown part in theplating,although this is easy to plate.Applications ofthe plating are described from the practical viewpoint.Purpose of Nickel Electroplating(1)Decorative,and corrosion resistanceNickel electroplating is deposited on iron,cupper,zinc and aluminum substrate etc.,and chromiumplating is usually deposited on nickel plating.Hexavalent chromium plating has an important effecton the corrosion resisitan…     

Mechanism of electrodeposition of copper from cupric pyrophosphate solutions

Cathodic polarization curves were measured for copper in cupric pyrophosphate solutions of different concentrations and temperatures. A rotating disc electrode was used to eliminate concentration polarization. For all solutions, two potential regions are distinguishable in the polarization curve; one is less negative than a critical potential E_b around ?0.75 V vs sce (Region I) and the other more negative than E_b (Region II). A weak adsorption of pyrophosphate ions and hence some inhibition of the electrodeposition of copper is expected for Region I but there is no adsorption in Region II. The exchange current density i_o for the copper deposition was obtained by extrapolating the Tafel relation observed in Region II to the rest potential corresponding to the equilibrium potential. The following reaction mechanisms are proposed to explain the dependence of i_o on the concentration of Cu(P₂O₇)^6?₂ and P₂O^4?₇ ions.

Apparent activation energies are estimated to be about 11 kcal/mol in both cases.     

Color ellipsoscope for real-time imaging of nanometer-scale surface phenomena

An imaging method was developed based on null ellipsometry with a white-light source. It is useful for visualizing the kinetics of fast surface phenomena on the nanometer scale.     

The evaluation of speckle contrast with variable speckle generator

Abstract— While laser projection has many advantages, there is a problem with speckle patterns generated as a result of interference of the laser beam and results in bad effects to observers. In 2010, a variable speckle generator, which produces an angular shift of incident light to the screen and generates variable speckle patterns, was suggested. In this study, the performance of a variable speckle generator by using a volume phase holographic beam shaper and scanning mirror was investigated in detail by evaluating both the objective and subjective speckle contrast. The morphology of the speckle pattern was also investigated when the variable speckle generator was activated. With a scanning VPH beam shaper, the objective speckle was effectively reduced because each point of the VPH beam shaper generated different speckle patterns and coherency among each pattern disappeared by using the scan process. On the other hand, subjective speckle was also dramatically reduced by changing the incident angle on the screen, which resulted in generating variable subjective speckle. It was also shown that the speckle reduction rate by using a variable speckle generator did not depend on the coherent length of a laser by evaluating the normalized speckle contrast against the angular shift on the screen.     

Ethnicity, culture, and sexual aggression: Risk and protective factors.

Explanatory models of sexual aggression were examined among mainland Asian American (n = 222), Hawaiian Asian American (n = 127), and European American men (n = 399). The Malamuth et al. (N. M. Malamuth, D. Linz, C. L. Heavey, G. Barnes, & M. Acker, 1995; N. M. Malamuth, R. J. Sockloskie, M. P. Koss, & J. S. Tanaka, 1991) confluence model of sexual aggression, which posits impersonal sex and hostile masculinity as paths to sexual aggression, was consistently supported. Culture-specific moderators of sexual aggression were also identified. Whereas loss of face was a protective factor against sexual aggression in the Asian American samples, it generally was not a protective factor among European Americans. These findings are not a function of actual or perceived minority status. An implication is that theoretical models may need to be augmented with cultural constructs for optimal application in certain ethnic group contexts. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Time dependence of mesoscopic strain distribution for triaxial woven carbon-fiber-reinforced polymer under creep loading measured by digital image correlation

This paper presents the time dependence of the mesoscopic strain of a triaxial woven carbon-fiber-reinforced polymer under creep loading measured using digital image correlation (DIC). Two types of DIC techniques were employed for the measurement: conventional subset DIC and mesh DIC. Static tensile and creep tests were carried out, and the time dependence of the mesoscopic strain distribution was investigated by applying these techniques. The ultimate failure of this material is dominated by inter-bundle decohesion caused by relative rigid rotation and relating shear stress. Therefore, these were focused on in the present study. During the creep tests, the fiber directional strain, shear strain, and rotation were monitored using the DIC, and the mechanism for the increase in the specimen’s macro-strain over time was investigated based on the results obtained by the DIC measurement.