Hydrothermal Reaction Mechanism and Pathway for the Formation of K2Ti6O13 Nanowires

Calculations and detailed first principle and thermodynamic analyses have been performed to understand the formation mechanism of K₂Ti₆O₁₃ nanowires (NWs) by a hydrothermal reaction between bulk Na₂Ti₃O₇ crystals and a KOH solution. It is found that direct ion exchange between K⁺ and Na⁺ plus H⁺ interactions with [TiO₆] octahedra in Na₂Ti₃O₇ promote the formation of an intermediate H₂K₂Ti₆O₁₄ phase. The large lattice mismatch between this intermediate phase and the bulk Na₂Ti₃O₇ structure, and the large energy reduction associated with the formation of this intermediate phase, drive the splitting of the bulk crystal into H₂K₂Ti₆O₁₄ NWs. However, these NWs are not stable because of large [TiO₆] octahedra distortion and are subject to a dehydration process, which results in uniform K₂Ti₆O₁₃ NWs with narrowly distributed diameters of around 10 nm.     

CaF_2-CaO-MgO-Al_2O_3-SiO_2电渣渣系高温力学性能的研究

本文针对结晶器与铸锭作相对移动的电渣重熔过程中对渣系的高温强度及塑性的要求,对10种CaF_2-CaO-MgO-Al_2O_3-SiO_2渣组成进行了渣的高温强度及塑性的测定,建立了渣组成—渣的岩相结构—渣高温强度及塑性间的对应关系,并选择出较合适的成分范围为CaF_2 35～60％,CaO 10～25％,Al_2O_3 10～20％,SiO_25～15％,MgO≈5％。对其中一个成分的渣进行了电渣热穿孔熔铸中空锭生产实验,并取得了良好的表面质量。     

节流式差压流量计的发展和现状

文章介绍节流式差压流量计的特点及标准化进程，煤气流量测量中存在的难点以及正在试图解决的途径。     

剂量率对聚四氟乙烯辐射裂解的影响

本文研究了在以电子加速器的电子射线为辐射源时,剂量率对PTFE辐射裂解的影响。在剂量相同的条件下,剂量率从1.44×10~4 rad/s增至5.75×10~4 rad/s,裂解效率提高3.3倍。剂量率和各断裂参数(单位剂量裂解度a_0,G(s)值等)均成线性关系。当裂解度一定时,剂量率与剂量成反变关系。     

Miniaturized Hexagonal Stepped-Impedance Resonators and Their Applications to Filters

Miniaturized hexagonal stepped-impedance resonators and their applications to bandpass filters are presented. Based on the odd- and even-mode equivalent circuits, the resonance characteristics of these resonators are investigated. A series of circuit configurations, including the third-order Chebyshev, trisection, and fifth-order cascaded trisection filters, are constructed by the proposed resonators. These filters are very compact and have good stopband responses. Measured results validate the analysis and theoretical prediction with good agreement.     

Grafting of maleic anhydride onto polyethylene through a green chemistry approach

The grafting of a polymer can lead to the improvement and modification of the polymer and thus expand its applications. Grafting methods include solution grafting in organic solvents, melt grafting at high temperatures, and light grafting with radioactive sources. These methods have their advantages and disadvantages. The disadvantages include waste treatment, consumption of energy, and so on. In this study, a hydrothermal process which is called the green approach, was developed to prepare graft copolymers. The effect of various factors on the grafting degree was investigated in detail. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

用αβ谱仪测量人工αβ放射性气溶胶体积活度的试验研究

本文介绍了用αβ谱仪系统同时测量αβ谱、实现Ｒｎ／Ｔｈ子体补偿、确定超铀α核素气溶胶体积活度及人工放射性气溶胶总β体积活度的技术途径。利用ＲａＡ、ＲａＣ′ａ峰的二段时间计数可确定空气中ＲａＡ、ＲａＢ、ＲａＣ的气溶胶体积活度，相应的，也能给出ＲａＢ、ＲａＣ对总β计数的贡献。根据一般环境条件下的平衡比，用ＴｈＣ′的。计数修正Ｔｈ子体对αβ测量的影响。￣［２３９］ｐｕ或／和￣［２４１］Ａｍ人工核素的α计数，可通过两段时间分别扣除ＲａＡ、ＲａＣ′拖尾的方法确定；β计数分别扣除Ｒｎ／Ｔｈ子体β贡献即可确定。在本文规定的测量条件下，对室内天然Ｒｎ子体水平在１５Ｂｑ／ｍ￣３以下，超铀α核素气溶胶体积活度的测量下限可达到０．１Ｂｑ／ｍ￣３；即使在７５Ｂｑ／ｍ￣３环境下，人工核素总β的测量下限也可达ｌＢｑ／ｍ￣３以下。