Adaptive control-based high-performance drive system implementation of traveling-wave-type ultrasonic motor

In recent years, ultrasonic motors (USM) as new actuators have attracted special interest. Several kinds of constructions and characteristics of USMs have been reported so far. Of these USMs, a traveling wave-type USM has many characteristics such as: high torque in the low-speed range, large holding torque based upon frictional force, flexible free forms, compactness in size and low magnetic noise. In practice, an inherent mechanical resonant frequency and a velocity amplitude of USM are changed largely according to operating temperature due to frictional drive, load disturbance torque, and applied voltage levels. Therefore, it is necessary to develop a new control system which solves these items and always supplies the required power with high efficiency and high performance in the practical applications. This paper proposes mainly a new sensorless high-performance control scheme of an inverter-fed ultrasonic motor, which is based on a control system technology with two feedbacks incorporating automatic resonant frequency tracking and constant velocity amplitude control strategies. This control system is realized in terms of a high-frequency chopper and a two-phase series/parallel resonant inverter. The experimental results are demonstrated and discussed compared with the theoretical ones.     

A novel robust current control approach using adaptive line enhancer for three‐phase current‐source active power filter

An effective system control method is presented for applying a three‐phase current‐source PWM converter with a deadbeat controller to active power filters (APFs). In the shunt‐type configuration, the APF is controlled such that the current drawn by the APF from the utility is equal to the current harmonics and reactive current required for the load. To attain the time‐optimal response of the APF supply current, a two‐dimensional deadbeat control scheme is applied to APF current control. Furthermore, in order to cancel both the delay in the two‐dimensional deadbeat control scheme and the delay in DSP control strategy, an Adaptive Line Enhancer (ALE) is introduced in order to predict the desired value three sampling periods ahead. ALE has another function of bringing robustness to the deadbeat control system. Due to the ALE, settling time is made short in a transient state. On the other hand, total harmonic distortion (THD) of source currents can be minimized compared to the case where ideal identification of the controlled system can be made. The experimental results obtained from the DSP‐based APF are also reported. The compensating ability of this APF is very high in accuracy and responsiveness although the modulation frequency is rather low. © 2004 Wiley Periodicals, Inc. Electr Eng Jpn, 150(1): 50–61, 2005; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20014     

Series resonant ZCS‐PFM DC‐DC power converter with high‐frequency high‐voltage transformer link for high‐power magnetron drive

This paper presents a single lossless inductive snubber‐assisted ZCS‐PFM series resonant DC‐DC power converter with a high‐frequency high‐voltage transformer link for industrial‐use high‐power magnetron drive. The current flowing through the active power switches rises gradually at a turned‐on transient state with the aid of a single lossless snubber inductor, and ZCS turn‐on commutation based on overlapping current can be achieved via the wide range pulse frequency modulation control scheme. The high‐frequency high‐voltage transformer primary side resonant current always becomes continuous operation mode, by electromagnetic loose coupling design of the high‐frequency high‐voltage transformer and the magnetizing inductance of the high‐frequency high‐voltage transformer. As a result, this high‐voltage power converter circuit for the magnetron can achieve a complete zero current soft switching under the condition of broad width gate voltage signals. Furthermore, this high‐voltage DC‐DC power converter circuit can regulate the output power from zero to full over audible frequency range via the two resonant frequency circuit design. Its operating performances are evaluated and discussed on the basis of the power loss analysis simulation and the experimental results from a practical point of view. © 2005 Wiley Periodicals, Inc. Electr Eng Jpn, 153(3): 79–87, 2005; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20126     

Visualization of Knoop Indentation Damage of Silicon Nitride by Plasma Etching

A visualizing technique for indentation damage of ceramics was developed. Plasma etching was used to enhance the view of cracks and the subsurface microcracking crush zone following Knoop indentation of hot pressed Si₃N₄. The microcracking zone was readily identified from the surface view of the indented surface as a grain-falling-off region (GFOR), defined as a region in which grains were removed by preferential etching using CF₄ gas, followed by ultrasonic cleaning. A fissure-like opening corresponding to the indentation cracks was also observed. It is inferred that the formation of the GFOR region and the fissure-like opening were caused by the etching/cleaning treatment. Meanwhile, the etching on a section which included diagonals of the impression provided a section view of the microcracking zone.     

Intermittent administration of brain-derived neurotrophic factor (BDNF) ameliorates glucose metabolism and prevents pancreatic exhaustion in diabetic mice

We previously demonstrated that repetitive administration of brain-derived neurotrophic factor (BDNF) ameliorates glucose metabolism and energy expenditure in obese diabetic db/db mice. However, we have not evaluated in detail the effect of single or intermittent BDNF administration on glucose metabolism in a diabetic animal model. The objectives of this study were to examine the dose-response effect and dosing interval of BDNF administration in db/db mice and to evaluate the effect of intermittent BDNF administration on pancreatic function in db/db mice. We evaluated the dose-response effect of BDNF by single administration in db/db mice. First, single administration of BDNF greater than 70 mg/kg significantly reduced blood glucose concentration one day after administered, and the BDNF effect was maintained for 6 d. Next, the effects of BDNF administered twice a week at 4, 10, 25, and 62.5 mg/kg on blood glucose concentration, and the effects of BDNF administered once a week at 10, 20, 30, 50, and 70 mg/kg on blood glucose concentration were examined in db/db mice. In the intermittent treatment studies, BDNF dose-dependently ameliorated glucose metabolism by not only the twice-a-week administration but also the once-a-week administration. Lastly, because BDNF reduces the food intake of obese hyperphagic diabetic mice, the effects of BDNF administered once or twice a week on the blood glucose concentration and plasma and pancreatic insulin concentrations in db/db mice were compared with those of the vehicle under pair-fed conditions. Under pair-fed conditions, the intermittent administration of BDNF (25 mg/kg, twice a week, or 50 mg/kg, once a week) significantly reduced the blood glucose concentration and increased the plasma and pancreatic insulin concentrations compared with those in the pair-fed vehicle-treated db/db mice. This indicates that the prolonged hypoglycemic effect of BDNF is not simply due to the reduction of food intake. In conclusion, we demonstrated that the intermittent administration of BDNF ameliorates glucose metabolism and prevents pancreatic exhaustion in obese diabetic mice. These findings indicate that BDNF may have potential as a unique hypoglycemic agent for the treatment of diabetes at a fundamental level with good patient compliance.     

Fabrication, Sinterability, and Mechanical Properties of Lead Zirconate Titanate/Silver Composites

High-toughness and high-strength lead zirconate titanate (PZT) composites that contain fine silver particles were successfully fabricated at low sintering temperatures. Addition of silver to a PZT matrix did not result in unwanted reaction phases; however, some silver diffused toward the perovskite crystal structure. A small quantity of silver accelerated the sinterability of the PZT composites. The formation of oxygen vacancies due to the partial substitution of silver appeared to enhance the sinterability of the PZT. Fracture toughness depended on the size and degree of sphericity of the silver particles, and SEM observations on crack propagation suggested that the toughening mechanism in the PZT/Ag composites involves crack bridging resulting from the ductile behavior of silver particles. It is proposed that high fracture strength in PZT/1 to 5 vol% Ag composites results from the relaxation of transformation-induced internal stress by the silver particles.     

Polyunsaturated fatty glyceride syntheses by microbial lipases

The degree of glyceride syntheses by lipase TOYO (Chromobacterium viscosum) and lipase OF (Candida cylindracea) using individual free fatty acids C_18∶1, C_18∶2, C_18∶3, C_18∶4, C_20∶4, C_20∶5 and C_22∶6 were compared. Lipase TOYO incorporated each of the fatty acids into glycerol at levels of greater than 89%. Lipase OF incorporated most of the fatty acids at levels above 70% (docosahexaenoic acid incorporation was 63%). It was concluded that these two lipases are feasible for producing glycerides from unsaturated fatty acids.     

Optical sensing of materials movements occurring at a plant surface with a probe beam

Optical sensing of materials movements across a plant surface with a probe beam is reported. It is based on monitoring of deflection of a probe beam passing through a vicinity of the plant surface. The deflection of the probe beam was caused by concentration gradients of chemical species involved in the materials moments in physiological activities of the plant. Typha angustifolia L. was used as a model plant. The beam deflection at different locations of both leaves and roots in respiration process were monitored and compared. It is found that deflection signals changed with time and locations. Experimental results showed that the beam deflection method could be used for noninvasive sensing and monitoring of materials movements across the plant surface.     

Dual-Mode Time-Sharing Sinewave-Modulation Soft Switching Boost Full-Bridge One-Stage Power Conditioner Without Electrolytic Capacitor DC Link

This paper is aimed at presenting a novel system topology and control scheme of a selective dual-mode pulse-modulated high-efficiency single-phase sinewave power-conversion circuit for the new energy generation and storage applications. This power-conversion system is composed of a time-sharing-operated sinewave-absolute-modulation boost chopper with a bypass diode in the first power conditioning and processing stage and time-sharing sinewave partially pulse-modulated full-bridge inverter in the second stage. The proposed power conditioner is operated by a selective time-sharing dual-mode pulse pattern signal processing control scheme without electrolytic capacitor dc link. The unique operating principle of the two-power conditioning and processing stages with sectional time-sharing dual-mode partial sinewave-modulation scheme is described and discussed with a design example. In addition, this paper proposes also a sinewave tracking voltage controlled soft switching pulsewidth-modulation boost chopper with a bypass-diode loop, which includes a passive auxiliary edge-resonant snubber. The new conceptual operating principle and the control implementation of this novel power conditioner are presented and evaluated through experimental and simulation results