Continuous hydrolysis of olive oil by lipase in microporous hydrophobic membrane bioreactor

Continuous hydrolysis of olive oil byCandida cylindracea’s lipase was studied in a microporous hydrophobic membrane bioreactor. Olive oil and buffer solution, fed continuously through two compartments partitioned by membrane, caused reaction at the interface of lipase-adsorbed membrane and buffer solution. Fatty acid was obtained in a single phase without being mixed with components of other phases. At all mean residence times, countercurrent flow mode was superior to cocurrent one. The lipase was adsorbed onto the membrane, and its adsorption was suggested to be partially specific from the experiments with enzymes having various levels of purity. The percent hydrolysis depended hyperbolically on the interfacial enzyme concentration. The hydrolysis seemed to be limited by diffusion of fat or fatty acid through the micropores of the membrane at higher interfacial enzyme concentrations. The lipase was stabilized significantly by glycerol added to the buffer solution. Satisfactory performance of the membrane bioreactor was obtained in a longterm continuous operation which lasted for 24 days by feeding buffer-glycerol (18.0%) solution over the adsorbed lipase. The operational half-life of the adsorbed enzyme was 15 days at 40 C.     

Superconductivity in SrTa2S5

A strontium tantalum sulfide, SrTa₂S₅, has a hexagonal structure with lattice constants of a =3.32 and c=24.1 Å. With decreasing temperature the electrical resistivity decreases monotonically and exhibits an abrupt superconducting transition at 3.16 K (midpoint). The diamagnetic susceptibility is observed below T_c. The magnetic susceptibility is nearly independent of temperature above T_c and shows Pauli paramagnetism.     

Plastic deformation in a multifunctional Ti-Nb-Ta-Zr-O alloy

Mechanisms for plastic deformation in the newly developed Ti-24 at. pct (Ta + Nb + V)-(Zr,Hf)-O alloys (Gum Metal) were investigated in relation to their unique properties. Transmission electron microscopy revealed that the microstructure after deformation was characterized by highly distorted crystal images, which are accompanied by numerous “giant faults.” Such plastic behavior implies that a large amount of elastic stain energy was stored discretely and hierarchically during cold working. Calculated elastic constants of the Ti-X (Nb,Ta,Mo,V) binary systems predicted that Young’s modulus in 〈001〉 and shear moduli along some directions including slip systems in a bcc crystal were extraordinary small. The low modulus not only well explains the highly distorted microstructure observed in the cold-worked specimens, but also signifies that ideal shear strength of the developed alloys is a very small value, which is close to the practical strength required for plastic deformation in the alloy. This implies that the giant faults observed in the deformed specimen were formed without the aid of dislocation glide.     

Clinical implications of chromosomal abnormalities in 401 patients with myelodysplastic syndromes: a multicentric study in Japan

It is well known that cytogenetic analysis in patients with myelodysplastic syndrome (MDS) provides information useful in determining their prognosis. Based on the chromosomal results obtained from 401 MDS patients by a multicentric study in Japan, we studied correlations between chromosomal findings and prognosis or leukemic transformation in MDS patients. Patients with complex aberrations (cytogenetic abnormalities at more than three chromosomes), of any subtype, had a poor prognosis; for example, > 60% of patients with refractory anemia (RA) showing complex aberrations died within one year, but only 11% of them developed leukemia. In patients with RA with ringed sideroblasts (RARS), > 70% of those with complex aberrations evolved into the leukemic phase and survived for less than one year, suggesting a biologic heterogeneity in RARS patients. By contrast, about 5% of patients with RA or RARS exhibiting chromosomal findings other than -7/7q-, +8, two aberrations, and complex aberrations, developed leukemia and had a favorable prognosis. Therefore, the presence of chromosome abnormalities alone in patients with RA or RARS is not a factor in predicting leukemic transformation or poor prognosis. In patients with refractory anemia with an excess of blasts (RAEB), the presence of chromosome aberrations at MDS diagnosis affected the occurrence of leukemic transformation (24% versus 43%), however, no particular difference was noted in patients with RAEB in transformation with regard to whether they had chromosome changes or not, and about 60% of them evolved into leukemia. The poor prognosis related to complex aberrations was consistently noted in all MDS subtypes or age-matched groups, indicating that this cytogenetic anomaly is an independent risk factor for a poor prognosis in MDS patients. The duration between MDS diagnosis and development of the leukemic phase and that between the latter and death were significantly shorter in patients with complex aberrations than those without this change. Although the clinical significance of certain chromosomal abnormalities differs among subtypes of MDS, a new scoring system for predicting prognosis by cytogenetic changes, in combination with hematologic parameters, was proposed.     

Effects of Annealing on Dielectric Loss and Microstructure of Aluminum Nitride Ceramics

The effect of annealing on tan δ and microstructures of aluminum nitride (AlN) ceramics were explored. Yttria was added as a sintering additive to AlN powders, and the powders were pressureless-sintered at 1900°C for 2 h in a nitrogen flow atmosphere. In succession to sintering, AlN samples were annealed at 720, 970 and 1210°C for 2 and 4 h. Very low tan δ values between 2.6 and 6.0 × 10⁻⁴ at 28 GHz were obtained when the AlN samples were annealed for 4 h at all the annealing temperatures.     

In-situ monitoring of the stabilization with hydrogen of free radicals thermally induced from coal using high pressure e.s.r., d.t.a. and p.d.a. equipment

High temperature, high pressure e.s.r. measurements of the hydrogenation reaction of Taiheiyo coal in the presence of catalysts were carried out to understand the stabilization of thermally and/or catalytically induced free radicals. A decrease in free radical concentration with increasing temperature was observed for ZnCl₂ and SnCl₂ · 2H₂O catalysts at 10MPa under hydrogen gas. High pressure modified single-cell d.t.a. and p.d.a. equipment augmented the uniquely designed high temperature, high pressure e.s.r. cell. The hydrogenation reaction was monitored under the same experimental conditions as for e.s.r. From the results of the combination of high temperature, high pressure e.s.r. with high pressure d.t.a. and p.d.a., it was established that H₂ molecules can react efficiently with free radicals from coal molecules created by the presence of ZnCl₂ and SnCl₂ · 2H₂O catalysts.     

Development of a liquid tin microjet target for an efficient laser-produced plasma extreme ultraviolet source

A regenerative tin liquid microjet target was developed for a high average power extreme ultraviolet (EUV) source. The diameter of the target was smaller than 160 microm and good vacuum lower than 0.5 Pa was maintained during the operation. A maximum EUV conversion efficiency of 1.8% at the Nd:yttrium-aluminum-garnet laser intensity of around 2 x 10(11) Wcm(2) with a spot diameter of 175 microm (full width at half maximum) was observed. The angular distribution of the EUV emission remained almost isotropic, whereas suprathermal ions mainly emerged toward the target normal.     

Investigations on welding residual stresses in penetration nozzles by means of 3D thermal elastic plastic FEM and experiment

Recent discoveries of stress corrosion cracking (SCC) in weldments including penetration nozzles at pressurized water reactors (PWRs) and boiling water reactors (BWRs) have raised concerns about safety and integrity of plant components. It is well known that welding residual stress is an important factor resulting in SCC in weldments. In the present work, both experimental method and numerical simulation technology are used to investigate the characteristics of welding residual stress distribution in penetration nozzles welded by multi-pass J-groove joint. An experimental mock-up is fabricated to measure welding residual stress at first. In the experiment, each weld pass is performed using a semi-circle balanced welding procedure. Then, a corresponding finite element models with considering moving heat source, deposition sequence, inter-pass temperature, temperature-dependent thermal and mechanical properties, strain hardening and annealing effect is developed to simulate welding temperature and residual stress fields. The simulation results predicted by the 3D model are generally in good agreement with the measurements. Meanwhile, to clarify the influence of deposition sequence on the welding residual stress, the welding residual stress field in the same geometrical model induced by a continuous welding procedure is also calculated. Finally, the influence of a joint oblique angle on welding residual stress is investigated numerically. The numerical results suggest that both deposition sequence and oblique angles have effect on welding residual stress distribution.     

Voltage Control of Static Var Compensator for a Remote System Interconnected by Long‐Distance AC Cables

The voltage variation in a remote system is large when the system is connected by long‐distance AC cables due to the cable capacitance. In Japan, the longest 54‐km 66‐kV AC submarine cable interconnection between the Kyushu mainland and Goto Islands was commissioned in 2005. It was requested to mitigate the voltage variation caused by switching off and on one circuit of the two circuits in the AC cables when a fault occurs. Since the conventional voltage control methods such as transformer tap changer or shunt capacitor and reactor banks are not sufficient because of their slow response time, a static var compensator (SVC) was installed on the Goto Islands. In such an application, an SVC control method should be developed so as not to override the existing voltage control systems. This paper describes the SVC control method developed for the Goto Islands AC interconnection project, which can be applied to similar situations. The effectiveness of the control method was verified by the results of effective value simulation and of field testing, which was implemented before the SVC was commissioned in 2007. © 2013 Wiley Periodicals, Inc. Electr Eng Jpn, 186(3): 19–30, 2014; Published online in Wiley Online Library ( wileyonlinelibrary.com ). DOI 10.1002/eej.22337