Some experimental findings in compression-after-impact (CAI) tests of CF/PEEK (APC-2) and conventional CF/epoxy flat plates

Compression-after-impact (CAI) tests have been conducted for quasi-isotropic thick plates with 48 plies by using the NASA method and on plates with 32 plies by using the SACMA method. Specimens are made of CF/PEEK (APC-2) and conventional CF/epoxy for the NASA plates and CF/epoxy for the SACMA plates. In the NASA CAI tests, the sequence of delamination buckling and its propagation is clearly revealed through various experimental techniques. One major technique is moiré topography, and the other is thermo-mechanical stress analysis with a high-accuracy infrared sensor. The arrest of delamination propagation just before catastrophic failure due to high fracture toughness is clearly captured by the moiré camera. This behavior provides good CAI values of CF/PEEK. The initial buckling properties of the delaminated region by the impact are then extensively discussed. Numerical predictions of initial buckling stress have been obtained by modelled geometry of the delaminated region simplified from its precise structure clarified by ultrasonic C-scanning. They agree fairly well with the experimental results. The in-plane stress distribution in the delaminated region before initial buckling is measured by an infrared stress graphic system. This compared favorably with finite element predictions. Two types of symmetric buckling modes with respect to the central plate surface, twin and single peak ones, are experimentally captured.     

Seismic proof test of a reinforced concrete containment vessel (RCCV): Part 2: Results of shaking table tests

A 1/8-scale model was constructed of a reinforced concrete containment vessel (RCCV) used in the latest advanced boiling water reactors (ABWR). Shaking table tests were conducted on it with input motions corresponding to or exceeding a design earthquake assumed for a real Nuclear Power Plant.The objectives of the tests were to verify the structural integrity and the leak-proof functional soundness of the RCCV subjected to design earthquakes, and to determine the ultimate strength and seismic margin by an excitation that led to the model's collapse. The model, the test sequence and the pressure and leak test results were addressed in Part 1. The shaking table test method, the input motions and the test results, including the transition of the model's stiffness, natural frequencies and damping factors and the effects of vertical input motions and internal pressure on the model's characteristics and behavior, the load–deformation, the ultimate strength, the failure mode of the reinforced concrete portion and the liner plate are described here. The seismic safety margin that was evaluated by the energy input during the failure test to a design basis earthquake will be described in Part 3. The analytical results of simulation using the multi-lumped mass model will be described in Part 4.     

Production of Gentiobiose from Hydrothermally Treated Aureobasidium pullulans β-1,3-1,6-Glucan

We report production of the functional disaccharide gentiobiose β-D-Glcp-(1→6)-D-Glc by a hydrolysis reaction of hydrothermally treated Aureobasidium pullulans β-1,3-1,6-glucan as the substrate and Kitalase as the enzyme. Gentiobiose was produced over the pH range 4−6 and the concentration of gentiobiose produced decreased above pH 7. The maximum value of gentiobiose production was unaffected by the enzyme concentration. The maximum concentration of gentiobiose produced was dependent on the substrate concentration whereas the maximum ratio of gentiobiose to glucose was not. The production of gentiobiose from yeast β-1,3-1,6-glucan was lower than that from A. pullulans β-1,3-1,6-glucan.     

Parallel streamer discharges between wire and plane electrodes in water

Streamer discharges in tap water and distilled water have been generated by applying a voltage pulse from 120 to 175 kV and 500 ns duration to a wire-to-electrode configuration. Electrical and optical diagnostics were used to explore the temporal development of the streamers in tap and distilled water, at various applied voltages and both polarities. With the wire serving as anode, multiple, parallel streamer discharges were generated. The number density of these streamers along the wire decreases with decreasing electric field on the surface of the wire. The dependence of the streamer density on electric field indicates the role of field enhancement at inhomogeneous microstructures along the wire as streamer initiation mechanism. The appearance of the discharge was different for tap and distilled water. However, the measured average streamer propagation velocity from the positive wire to the grounded plane electrode, of 32 mm//spl mu/s, was independent of the water conductivity and the applied voltage. This suggests the existence of a self-sustained electric field at the streamer head. With the wire serving as cathode, only a weak light emission from the area close to the wire was observed, and streamers did not appear for the same voltage amplitude as with the positive polarity. This suggests that an ionic current flowing in the water is not dominant in the streamer propagation process.     

Inhibition of carbon fiber growth from naphthalene with halogens

The influence of HCl, Cl₂, Br₂ and I₂ on the vapor phase growth of carbon fibers from naphthalene was examined at 1100°C with the expectation of a promotive effect similar to H₂S. However, these halogen additives were found not to catalyse but to inhibit the growth. Employment of 1-chloronaphthalene as the source material also resulted in the remarkable suppression of fiber formation. The fibers obtained in the presence of the halogens exhibited highly pockmarked surfaces, due to deposition of soot-like carbon. In addition, the deposition was preferential at the growing end of the fiber, so that the diameter became thick progressively from root to tip. From these observations, the inhibition of the fiber growth with halogens was attributed to the accelerated decomposition of naphthalene into soot-like carbon.     

Preparation of carbon microparticle assemblies from phenolic resin using an inverse opal templating method

Three-dimensionally (3D) well-ordered carbon microparticle assemblies with different particle morphologies were fabricated by infiltration of phenolic resin solution into SiO₂ inverse opal structures and subsequent carbonization. The effect of the phenolic resin solution concentration and the carbonization temperature on the morphology of the fabricated carbon microparticles was investigated. At a carbonization temperature of 1000 °C, carbon microparticles with interlocked bridges were obtained when the concentration of phenolic resin solution is 40 wt% and hollow carbon microparticles with opened window channels were obtained at a concentration of 30–35 wt%. When the carbonization temperature was decreased to 500 °C, carbon microparticles with interlocked bridges also were observed, even when the phenolic resin concentration was 30 wt%. The structures and properties of the carbon microparticles and their assemblies were characterized using SEM, XRD, and N₂ adsorption.     

An outcome of nuclear safety research in JAERI: case study for LOCA

An outcome of nuclear safety research (NSR) done by JAERI (Japan Atomic Energy Research Institute) was case studied by the bibliometric method. (1) For LOCA (loss-of-coolant accident) a domestic share of JAERI in monoclinic research paper was 63% at the past (20) 1978–1982 but was decreased to 40% at the present 1998–2002. For co-authored papers a domestic share between JAERI and PS (public sectors) was zero at past (20) but increased to 4% at the present. Research cooperation is active between Tokyo University and JAERI or between JAERI and Nagoya University. (2) It is revealed that LOCA outputs born by NSR-JAERI reflected partly to those of the Safety Licensing Guidelines, however, a share of NSR-JAERI could not determined due to the lack of necessary information in the Guideline.