油库油料计量操作中存在的问题及其解决办法

介绍了油库油料计量中，在油品高度、油品温度和油品密度测量中存在的问题及应遵循的操作规范和注意事项。     

Structure and Properties Characterization of Ceramic Coatings Produced on Steel Using a Combined Technique

STEEL is the most widely used material in engineering,but unfortunately,steel exhibits poor wear resistanceand obvious contact corrosion.For decades,researchersprepared coatings on steel to improve its properties;ceramic is one of these coatings.To obtain ceramiccoatings on steel,many researchers use techniques suchas plasma spraying,laser cladding,etc.,but some ofthem are too expensive,some of them have a deep heataffected zone in the substrate,and some of them cannot bond well with the subs…     

基于量化规则格的关联规则渐进更新*

提出一种基于量化规则格的规则更新算法,重点讨论了在新增格节点的过程中规则更新的思想,实现在格的渐增生成过程中,相应的关联规则也得到渐进更新.最后给出简单实例说明规则更新算法的正确性.     

溶液缩聚物分子量分布及其控制的研究

本文根据溶液缩聚基本原理及反应过程的基本事实，用随机过程方法，得到缩聚产物分子量分布函数，并对分子量及其分布的控制作了讨论。     

Fabricating Water-Insoluble Polyelectrolyte into Multilayers with Layer-by-layer Self-assembly

Summary A water insoluble azo-containing polyelectrolyte (PEAPB6P-AC) was successfully fabricated into multilayer films based on the layer-by-layer adsorption technique by using N, N-dimethylformamide (DMF) as the assembling media. The multilayer growth and structure were studied with UV-vis spectroscopy, and the multilayer surface were imaged with Atomic Force Microscopy and compared with that fabricated in water. The results show that assembling PEAPB6P-AC in DMF can effectively eliminate the hydrophobic aggregation of the azo units and consequently results in a much smoother multilayer surface than that fabricated in water. This improvement to the layer-by-layer adsorption technique, which can avoid some major difficulties faced when assembling hydrophobic polyelectrolytes in aqueous solutions, seems to be a versatile way to fabricate high quality multilayer films when using the hydrophobic even water-insoluble polyelectrolytes as assembling units.     

碳黑水分离技术的研究

脱油沥青作为谢尔气化工艺的气化原料生产化肥在国内尚属首次,由于沥青原料中的灰分和重金属比渣油原料大得多,若仍采用石脑油萃取碳黑技术,灰分和重金属随碳黑返回气化装置,将造成设备的堵塞、磨损,无法保证设备安稳长期运行.通过对碳黑水分离技术进行多方面的研究,寻找到适宜的工艺路线与解决方案.     

基于多判据的散乱点云特征点提取算法

为了有效获取散乱点云中的尖锐特征点和边界特征点,提出一种利用多判据融合的特征点提取算法。首先利用一种改进的k-d tree构建点云拓扑,搜索样点的K局部邻域;然后利用法向夹角判定准则、核密度判定准则、场力和判定准则分别求取各个样点局部邻域的三个特征参数,最后通过加权计算特征参数得到每个样点的特征值与全局判定阈值,特征值比阈值大的点即为特征点。实验证明,该算法能有效的获取散乱点云中边沿特征点与尖锐特征点。     

一种无线传感器网络环境下的查询路由与负载均衡机制

针对无线传感器网络节点数量多、通信距离短、能量有限的特点,提出一种查询增益路由算法以及基于路由的负载均衡机制。查询增益路由算法通过查询增益矩阵维护路由信息,并依据历史查询成功记录来选取路由节点;而基于路由的负载均衡机制可以在查询路由过程中记录节点的能量信息,转移负载,使得查询路径中各节点的能量消耗得到均衡。仿真实验结果表明,查询增益路由算法可以在降低节点能量消耗的前提下提高查询成功率,而基于路由的负载均衡机制可以进一步降低查询增益路由算法的能量消耗。     

Study on performance characteristics of fused deposition modeling 3D-printed composites by blending and lamination

Component contacting degree in a composite material is an important reference for evaluation the performance characteristics. In this article, two composite material systems involving polylactic acid (PLA) with acrylonitrile butadiene styrene (ABS) and PLA with thermoplastic polyurethane (TPU) were prepared by blending and laminating through fused deposition modeling (FDM) 3D printing technology. The mechanical and thermal properties of the as-prepared composite materials were examined. The results indicated that PLA and TPU played a dominant role in tensile strength and breaking elongation, respectively, in individual composite material. ABS and TPU changed the glass transition peek, crystallinity, and modulus of PLA. The results also suggested that although the processing design of the blending method was more suitable for the contact between two components, but the mechanical properties of laminated composites were closer to theoretical predictions. The structural design and processing technology provide a comparative method and reference basis for studying the performance characteristics of composite materials.     

Engineering all-aromatic polyamide surface from hydrophilic to superhydrophobic and the accelerated strategy

Being a new kind of nanomaterials, aromatic polyamide nanofibers (ANF) have been much highlighted in recent studies. We here demonstrate an isopropyl alcohol (IPA) accelerated chemical cleavage on poly (p-phenylene terephthalamide) chopped fibers, which provides an efficient preparation method of ANF. The comprehensive study on the processes accelerated by different alcohols revealed that the preparation time of ANF in the mixed medium of dimethyl sulfoxide (DMSO)-alcohol (20:1 in volume) was shorten to 45 min and 75 min for methanol (ethanol) and isopropanol, respectively. However, the nanofibers prepared in DMSO-IPA exhibited the minimum in axial and radial dimensions, providing the finest and most uniform diameter of 16 nm. The corresponding ANF films through vacuum assisted filtration also showed the highest tensile strength of 150 MPa, in comparison with those of the ANF films prepared using other alcohols, which were about 110 MPa. Furthermore, ANF/silicon hybrid films were prepared by the ionic ring-opening reaction followed by the alkoxysilane condensation and nanoparticle fabrication. By changing the organo functional groups in the alkoxysilane, the surface of the films were adjustable in a wide contact angle range from 56° (hydrophilic) to 150° (superhydrophobic), suggesting the amendable interfacial properties potential applicable to composite fabrication with most of the resin matrix.