A new polysilicon CMOS self-aligned double-gate TFT technology

In this paper, a new polysilicon CMOS self-aligned double-gate thin-film transistor (SA-DG TFT) technology is proposed and experimentally demonstrated. The self-alignment between the top- and bottom-gate is realized by a backlight exposure technique. The structure has an ultrathin channel region (300 /spl Aring/) and a thick source/drain region. Experimental results show that this technology provides excellent current saturation due to a combination of the effective reduction in the drain field and the full depletion of the ultrathin channel. Moreover, for n-channel devices, the SA-DG TFT has a 4.2 times higher on-current (V/sub gs/=20V) as compared to the conventional single-gate TFT. Whereas for the p-channel devices, the SADG TFT has a 3.6 times higher on-current (V/sub gs/=-20V) compared to the conventional single-gate device.     

混凝土U形渠道施工

混凝土U形渠施工的主要工序为施工前准备、U形渠施工、混凝土养护、伸缩缝填料、渠堤清理、边坡整修等。要严格控制各工序施工质量，确保U形渠施工质量，使U形渠发挥正常的效益。     

制盐设备用不锈钢及复合板的选材

OOCr18Ni5Mo3Si2(以下简称18－5）属铁素体（α）－奥氏体（γ）双相不锈钢，具有良好的耐Cl^-点蚀和应力腐蚀性能，18－5不锈钢复合板因其兼备优良的使用性能和较低的制造成本，在制盐领域不锈钢材料中，是理想的选择。本就OOCr18Ni5Mo3Si2双相不锈钢及复合板的性能、特点以及在制盐领域的成功事例作一介绍。     

ARM和WinCE6．0下nRF24L01的驱动设计

随着嵌入式WinCE系统的发展和近距离无线通信的广泛使用,有必要为近距离无线通信芯片编写驱动。由于nRF24L01在WinCE系统下驱动的缺乏,使得WinCE与nRF24L01芯片之间的直接通信成为困难。本文的驱动设计正好解决了这一难题。     

改进型时间触发嵌入式系统编程模式

对于成本敏感的嵌入式系统,通常因为资源有限而难以采用抢先式实时多任务操作系统。传统的基于超级循环的前后台编程方法和基于时间触发的合作式多任务编程方法对任务的划分需要较高的技巧。本文通过对基于时间触发合作式调度器的改进,建立了一种适用于小型嵌入式系统的通用编程模式,使这类系统的编程变得清晰、简单。     

Consensus reaching models of linguistic preference relations based on distance functions

In group decision making (GDM) using linguistic preference relations to obtain the maximum degree of agreement, it is desirable to develop a consensus process prior to the selection process. This paper proposes two consensus models with linguistic information to support the GDM consensus reaching process. Two different distance functions between linguistic preference relations are introduced to measure both individual consistency and group consensus. Based on these measures, the consensus reaching models are developed. The two models presented have the same concept that the expert whose preference is farthest from the group preference needs to update their opinion according to the group preference relation. In addition, the convergence of the models is proved. After achieving the predefined consensus level, each expert’s consistency indexes are still acceptable under the condition that the initial preference relations are of satisfactory consistency. Finally, an example is given to show the effectiveness of the models and to verify the theoretical results.     

级联电池储能系统待机状态电位与电压分布特性∗

受电缆对地分布电容和电池簇对地分布电容的影响,待机状态下CHB-BESS主电路中流过的电流为较微弱的容性漏电流,回路阻抗大,其储能单元对地电位和交流侧出口电压分布与运行状态有很大不同.靠近并网点的储能单元交流侧电压为矩形波,有效值高;随着与并网点距离的增加,储能单元交流侧电压趋向于正弦波,且电压有效值逐渐减小.测量装置的输入阻抗对C HB-BESS待机状态的电位分布和交流侧出口电压分布也会产生严重影响,需要针对性地对相关设备或电路在待机状态的适应性进行评估方可保证安全.     

配电线路不停电作业机器人研究

从传统的人工带电作业方式出发,根据国内外不停电作业机器人的发展现状,对机器人带电作业方式进行分类,并结合具体实例,描述了我国不停电作业机器人的特点,对该领域存在的问题进行分析和展望.