Mathematical model for computer simulation and control of steelmaking

A dynamic model for computer simulation and control of steelmaking has been developed. It is essentially based on multicomponent mixed transport control theory with the incorporation of energy balance calculations. The model is applicable to both steelmaking in electric furnaces as well as in oxygen steelmaking converters. The adjustable parameters of the model for simulation of oxygen steelmaking are gas evolution rate (G_co). oxygen flux factor (F_o) and emulsification factor (EM). These simulation parameters, when combined with on-line measurement of off-gas composition and temperature, enable complete dynamic control of the process. The model developed is applied, as an example, to an industrially produced heat in a top blown oxygen steelmaking converter and the results of simulation are discussed.     

Electrical Characterization of p-Type Pb1−x Eu x Te

The transport properties of p-type Pb_1?x Eu _x Te epitaxial layers were studied as a function of Eu content, temperature, and magnetic field. The low-temperature hole mobility is drastically reduced when the Eu concentration is increased from 0 to 6%, while the hole concentration remains almost constant. A metal-insulator transition was observed for x ≈ 0.04, which is probably induced by the disorder caused by the introduction of Eu. For temperatures down to 10 K, only positive magnetoresistance has been observed at low magnetic fields. An anomalous behavior of the resistivity as a function of temperature has been detected for a Eu content about 5%, which is attributed to the resonance between the localized Eu 4f level and the valence band maximum.     

IEEE-PES Transmission and Distribution Conference and Exposition Call for Papers

Static network-related system voltage stability margin (VSM) depends on the availability of reactive power to support the transport of real power from sources to sinks. Based on this premise, the total VAr loss is minimized in the unified OPF framework considering real and reactive power controllers, and its effect on VSM is studied. Studies are conducted on a three-bus system, the IEEE 30-bus system, and a 191-bus Indian electric power system, and their results are reported.     

Microwave-Assisted Synthesis of Fine Particle Oxides Employing Wet Redox Mixtures

Interaction of electromagnetic radiation with a physical mixture of metal nitrates and amides/hydrazides is observed to initiate high-temperature reactions, useful for realizing several high-temperature ceramic materials. A judicious choice of such redox mixtures undergoes exothermic reactions when they couple with microwave radiation. The coupling of electromagnetic radiation with metal salts and amides/hydrazides depends on the dielectric properties of the individual components in the reaction mixture. The approach has been used to prepare γ-Fe₂O₃, Fe₃O₄, MgCr₂O₄, α-CaCr₂O₄, and La_0.7Ba_0.3MnO₃.     

Reasoning about non-immediate triggers in biological networks

Modeling molecular interactions in signalling networks is important from various perspectives such as predicting side effects of drugs, explaining unusual cellular behavior and drug and therapy design. Various formal languages have been proposed for representing and reasoning about molecular interactions. The interactions are modeled as triggered events in most of the approaches. The triggering of events is assumed to be immediate: once an interaction is triggered, it should occur immediately. Although working well for engineering systems, this assumption poses a serious problem in modeling biological systems. Our knowledge about biological systems is inherently incomplete, thus molecular interactions are constantly elaborated and refined at different granularity of abstraction. The model of immediate triggers can not consistently deal with this refinement. In this paper we propose an action language to address this problem. We show that the language allows for refinements of biological knowledge, although at a higher cost in terms of complexity.      

Optimisation of solar photovoltaic (PV) parameters using meta-heuristics

Microsystem Technologies - This paper presents a critical analysis of the meta-heuristic techniques used in various researches on the optimisation of photovoltaic (PV) parameters, which involves...     

Aggregation dynamics of particles in a microchannel due to an applied magnetic field

Functionalized magnetic microspheres have promising applications in different microfluidic devices including MEMS-scale biosensors. These particles exhibit magnetic field-induced aggregation, which can be harnessed to achieve several practical tasks in microfluidic devices. For this, the particle aggregation needs to be well characterized. Herein, a numerical simulation and experimental validation of particle-chaining is presented. Simulations show that the particle aggregation time scales linearly with a group parameter. The predicted growth of one- two- and three-particle chains with time shows a similar trend as that found in the experiments. The results of the study could help predicting the performance of magnetic aggregate-based lab-on-a-chip devices.     

Glass fiber-reinforced epoxy composites

Glass fiber-reinforced epoxy composites were prepared from the matrix resins tetraglycidyl diaminodiphenylmethane

1 Systematic name: N,N,N′,N′-Tetrakis(2,3-epoxypropyl)-4,4′-diaminodiphenylmethane.

(TGDDM) and tetraglycidyl bis(o-toluidino)-methane

2 Systematic name: N,N,N′,N′-Tetrakis(2,3-epoxypropyl)-4,4′-bis(o-toluidino)methane.

(TGMBT) using various amines like 4,4′-diaminodiphenylmethane (DDM), 4,4′-diaminodiphenylsulfone (DDS) and diethylene triamine (DETA) as curing agents. The fabricated laminates were evaluated for their mechanical and dielectrical properties and chemical resistance. The composites prepared using an epoxy fortifier (20 phr) showed significant improvement in the mechanical properties.     

Parallel heap: An optimal parallel priority queue

We describe a new parallel data structure, namely parallel heap, for exclusive-read exclusive-write parallel random access machines. To our knowledge, it is the first such data structure to efficiently implement a truly parallel priority queue based on a heap structure. Employing p processors, the parallel heap allows deletions of (p) highest priority items and insertions of (p) new items, each in O(log n) time, where n is the size of the parallel heap. Furthermore, it can efficiently utilize processors in the range 1 through n.This work was supported by U.S. Army's PM-TRADE contract N61339-88-g-0002, Florida High Technology and Industry grant 11-28-716, and Georgia State University's internal research support during spring and summer quarters, 1991.     

Particle distribution control in cast aluminium alloy-mica composites

A suspension of mica particles (40m diameter and 3.7 thick) obtained in a mechanically stirred Al-4 wt % Cu-1.5 wt % Mg melt was poured and solidified in a variety of moulds under different heat flow configurations. The resulting cast structure showed a non-uniform distribution of dispersed mica particles with mica-depleted and segregated zones due to their flotation before and during solidification. The experimentally observed profiles of mica-free regions deviate significantly from those computed on the basis of Stokes's law and freezing-time computations. In relatively thick castings, segregation of mica could be minimized by using low pouring temperatures and/or side as well as bottom chilling. It was found, however, that thin castings (12.5 mm) could easily be produced with a homogeneous distribution of mica particles.