Evaluation of expanded gamut software solutions for spot color reproduction

Expanded gamut printing is an approach in color reproduction that expands the color gamut of conventional CMYK printing processes via the use of additional colorants, such as Orange, Green, and Violet inks. This study evaluates the ability of commercial color management software to create an accurate solution for an expanded gamut printing system. In this study, two printing processes were used, an Epson SureColor P9000 inkjet printer/proofer and an HP Indigo 7900 digital production press, both with 7-color expanded gamut ink sets. Software solutions from Alwan, CGS ORIS, ColorLogic, GMG Color, Heidelberg, and Kodak were evaluated. The systems were tested to see how well they could reproduce the colors in the entire PANTONE+ Solid Coated spot color library. It is shown that the solutions are able to reproduce 89% to 94% of the spot colors on the Epson P9000 inkjet printer and 77% to 87% of the library on the Indigo 7900, both to less than two CIEDE2000 (a typical tolerance in label and packaging work). The number of color patches in expanded gamut characterization test charts was noted, as this is still an area of proprietary, nonstandardized working practice. There are many different colorant combinations that can make the same color in expanded gamut printing. The ink build created by the different software solutions was studied, as it relates to press stability through appropriate choice of colorants. Pantone and Adobe provide everyday commercial tools for expanded color workflows. The study identified some issues with products from these companies that could confuse a less-skilled user in a busy production environment. The conclusion of the study is that expanded gamut solutions for spot color printing produce totally acceptable results for digital printing processes; expanded gamut printing is ready, here and now. The findings show that expanded gamut printing can replace cumbersome conventional spot color workflows creating considerable savings and advantages, especially for label and packaging printers.     

State estimation for high-dimensional chemical processes

The application of conventional observer designs for high-dimensional systems may not always be practical due to high computational requirements or the resulting observers being too sensitive to measurement noise. In order to address these issues, this paper presents two observer design techniques for state estimation of high-dimensional chemical processes. One technique is used for systems with inputs, whereas the other one is specifically geared towards systems that are not excited from the outside. Both of these observers are applicable to linear and with a modification to non-linear systems.The main idea behind the presented observer designs is that a reduced-order observer is implemented instead of a conventional state estimator. The motivation is that subspaces, which are close to being unobservable, cannot be correctly reconstructed in a realistic setting due to measurement noise and inaccuracies in the model. The presented approaches make use of this observation and only reconstruct the parts of the system where accurate state estimation is possible. The observer designs are illustrated on a 30-tray distillation column model. Additionally, it has been shown that the location of process measurements has a major effect on the performance of the presented reduced-order observers.     

CNFET Based Ultra-Low-Power Schmitt Trigger SRAM for Internet of Things (IoT) Applications

Wireless Personal Communications - This paper presents Carbon Nanotube FET (CNFET) based ultra-low-power Schmitt trigger SRAM designs which can operate at voltage levels as low as 200 mV, with high...     

Interpolation of images using discrete wavelet transform to simulate image resizing as in human vision

This paper presents discrete wavelet transform (DWT) and its inverse (IDWT) with Haar wavelets as tools to compute the variable size interpolated versions of an image at optimum computational load. As a human observer moves closer to or farther from a scene, the retinal image of the scene zooms in or out, respectively. This zooming in or out can be modeled using variable scale interpolation. The paper proposes a novel way of applying DWT and IDWT in a piecewise manner by non-uniform down- or up-sampling of the images to achieve partially sampled versions of the images. The partially sampled versions are then aggregated to achieve the final variable scale interpolated images. The non-uniform down- or up-sampling here is a function of the required scale of interpolation. Appropriate zero padding is used to make the images suitable for the required non-uniform sampling and the subsequent interpolation to the required scale. The concept of zeroeth level DWT is introduced here, which works as the basis for interpolating the images to achieve bigger size than the original one. The main emphasis here is on the computation of variable size images at less computational load, without compromise of quality of images. The interpolated images to different sizes and the reconstructed images are benchmarked using the statistical parameters and visual comparison. It has been found that the proposed approach performs better as compared to bilinear and bicubic interpolation techniques.     

Enhancing the isolation between the strips of dipoles antenna at terahertz frequency with cuboid-shaped graphene layer

Wireless Networks - In this paper, the concept of mantle cloaking method uses to enhance the isolation between the two electrically close dipole antenna at low-terahertz (THz) frequencies, two...     

Premarin Reduces Neurodegeneration and Promotes Improvement of Function in an Animal Model of Spinal Cord Injury

Spinal cord injury (SCI) causes significant mortality and morbidity. Currently, no FDA-approved pharmacotherapy is available for treating SCI. Previously, low doses of estrogen (17β-estradiol, E2) were shown to improve the post-injury outcome in a rat SCI model. However, the range of associated side effects makes advocating its therapeutic use difficult. Therefore, this study aimed at investigating the therapeutic efficacy of Premarin (PRM) in SCI. PRM is an FDA-approved E2 (10%) formulation, which is used for hormone replacement therapy with minimal risk of serious side effects. The effects of PRM on SCI were examined by magnetic resonance imaging, immunofluorescent staining, and western blot analysis in a rat model. SCI animals treated with vehicle alone, PRM, E2 receptor antagonist (ICI), or PRM + ICI were graded in a blinded way for locomotor function by using the Basso–Beattie–Bresnahan (BBB) locomotor scale. PRM treatment for 7 days decreased post-SCI lesion volume and attenuated neuronal cell death, inflammation, and axonal damage. PRM also altered the balance of pro- and anti-apoptotic proteins in favor of cell survival and improved angiogenesis and microvascular growth. Increased expression of estrogen receptors (ERs) ERα and ERβ following PRM treatment and their inhibition by ER inhibitor indicated that the neuroprotection associated with PRM treatment might be E2-receptor mediated. The attenuation of glial activation with decreased inflammation and cell death, and increased angiogenesis by PRM led to improved functional outcome as determined by the BBB locomotor scale. These results suggest that PRM treatment has significant therapeutic implications for the improvement of post-SCI outcome.     

Studies of cryotreatment on the performance of integral diaphragm pressure transducers for space application

The integral diaphragm pressure transducers machined out of precipitation hardened martensite stainless steel (APX4) are widely used for propellant pressure measurements in space applications. These transducers are expected to exhibit dimensional stability and linearity for their entire useful life. These vital factors are very critical for the reliable performance and dependability of the pressure transducers. However, these transducers invariably develop internal stresses during various stages of machining. These stresses have an adverse effect on the performance of the transducers causing deviation from linearity. In order to eliminate these possibilities, it was planned to cryotreat the machined transducers to improve both the long-term linearity and dimensional stability. To study these effects, an experimental cryotreatment unit was designed and developed based on the concept of indirect cooling using the concept of cold nitrogen gas forced closed loop convection currents. The system has the capability of cryotreating large number of samples for varied rates of cooling, soaking and warm-up. After obtaining the initial levels of residual stress and retained austenite using X-ray diffraction techniques, the pressure transducers were cryotreated at 98 K for 36 h. Immediately after cryotreatment, the transducers were tempered at 510 °C for 3 h in vacuum furnace. Results after cryo treatment clearly indicated significant reduction in residual stress levels and conversion of retained austenite to martensite. These changes have brought in improvements in long term zero drift and dimensional stability. The cryotreated pressure transducers have been incorporated for actual space applications.     

Hydrogen-Induced Cracking (HIC) of Hardened and Tempered Steel Fastener Used in Space Application

Cadmium-plated 0.35C–3.5Ni–1.5Cr–0.5Mo steel threaded fasteners of 1230 MPa properties class are used for aerospace applications. These fasteners were torqued to 13 N·m. Few fasteners parted into two pieces while in use under sustained assembly load for a period of 50 days. The fracture surface of the failed fasteners had two distinct regions when viewed under microscope at higher magnification. Fractography revealed that the larger region consisted of predominantly intergranular features, whereas the smaller region had features of microvoid coalescence. From the metallography evidences it was concluded that the fastener failure was due to hydrogen embrittlement. Electro-deposit of cadmium was identified to be the main source for hydrogen entrapment, which could not be compelled completely by post-plating baking treatment.