Observations are reported on isotactic polypropylene (i) in a series of tensile tests with a constant strain rate on specimens annealed for 24 h at various temperatures in the range from 110 to 150 °C, (ii) in two series of creep tests in the subyield region of deformations on samples not subjected to thermal treatment and on specimens annealed at 140 °C, and (iii) in a series of tensile relaxation tests on non-annealed specimens. Constitutive equations are derived for the elastoplastic and non-linear viscoelastic responses of semicrystalline polymers. A polymer is treated as an equivalent transient network of macro-molecules bridged by junctions (physical cross-links, entanglements and lamellar blocks). The network is assumed to be highly heterogeneous, and it is thought of as an ensemble of meso-regions with different activation energies for separation of strands from temporary nodes. The elastoplastic behavior is modelled as sliding of junctions in meso-domains with respect to their reference positions driven by macro-deformation. The viscoelastic response is attributed to detachment of active strands from temporary junctions and attachment of dangling chains to the network. Constitutive equations for isothermal deformations with small strains are derived by using the laws of thermodynamics. Adjustable parameters in the stress–strain relations are found by fitting the experimental data. 相似文献
Elemental depth profiles of PZT films prepared by two sol–gel formulations, differing in the zirconium precursor stabilization, were investigated by SIMS analysis. Early decomposition of the zirconium precursor yielded opposing gradients of zirconium and titanium, while simultaneous late decomposition of zirconium and titanium precursors provided profile uniformity. The gradients formed during initial crystallization are irreversible. Both types of films showed excellent hysteresis; however, uniform films exhibited a much higher dielectric constant, indicating superior piezoelectric properties. Non-uniform films displayed a complex CV pattern, consistent with an inhomogeneous structure. Finally, thermal decomposition of the individual metal precursors is crucial for controlling film uniformity. 相似文献
DNA family shuffling was used to create chimeric lipase B proteins with improved activity toward the hydrolysis of diethyl 3-(3',4'-dichlorophenyl)glutarate (DDG). Three homologous lipases from Candida antarctica ATCC 32657, Hyphozyma sp. CBS 648.91 and Crytococcus tsukubaensis ATCC 24555 were cloned and shuffled to generate a diverse gene library. A high-throughput screening assay was developed and used successfully to identify chimeric lipase B proteins having a 20-fold higher activity toward DDG than lipase B from C.antarctica ATCC 32657 and a 13-fold higher activity than the most active parent derived from C.tsukubaensis ATCC 24555. In addition, the stability characteristics of several highly active chimeric proteins were also improved as a result of family shuffling. For example, the half-life at 45 degrees C and melting point (T(m)) of one chimera exceeded those of lipase B from C.antarctica ATCC 32657 by 11-fold and 6.4 degrees C, respectively, which closely approached the stability characteristics of the most thermostable parent derived from Hyphozyma sp. CBS 648.91. 相似文献
This work addresses the reduction of NOx by H2 under O2-rich conditions using Al2O3/SiO2-supported Pt catalysts with different loads of WOx promotor. The samples were thoroughly characterised by N2 physisorption, temperature-programmed desorption of CO, scanning electron microscopy, X-ray diffraction, laser raman spectroscopy, X-ray photoelectron spectroscopy and diffuse reflectance infrared fourier transform spectroscopy with probe molecule CO. The catalytic studies of the samples without WOx showed pronounced NOx conversion below 200 °C, whereas highest efficiency was related to small Pt particles. The introduction of WOx provided increasing deNOx activity as well as N2 selectivity. This promoting effect was referred to an additional reaction path at the Pt-WOx/Al2O3/SiO2 interface, whereas an electronic activation of Pt by strong metal support interaction was excluded.
This study focuses on hydrological and biotic variables in Lake Glubokoe, which is located in Thala Hills of Enderby Land (East Antarctica). Water and sediment samples and physical measurements were collected once a week in the austral summer (19 December 2010 – 6 February 2011). This lake exhibits perennial ice cover that reached a thickness of 2.5–2.7 m during the study period. A very low concentration of planktonic chlorophyll‐a (0.06–0.45 μg L?1) was measured in the lake, indicating its ultra‐oligotrophic status. The water was poorly populated by algae and metazoans, especially in upper waters below ice cover to a depth of 2 m. Small planktonic organisms (2–5 μm) were observed throughout the study period, but larger organisms (>8 μm) such as the cyanobacteria Planktolyngbya limnetica occurred only during the warmest period (January). Only few individuals of metazoans (rotifers) were found in planktonic samples. Due to deep light penetration (10–15% of incoming active solar radiation reached the depth of 30 m), thick cyanobacterial mats (30 cm) cover all the bottom surface (grey silts) in the lake. Abundant benthic biota associated with these mats was found (up to 1000 ind. m?2). Among the benthic metazoans, bdelloid rotifers and tardigrades were the dominating taxa. The results of this study suggest a typical ecological feature of most subglacial lakes in East Antarctica is that metazoans are very poor in the pelagic zone, preferring instead to occupy an area near the lake bottom because of a favourable constant temperature of 4 °C, good level of dissolved oxygen and available food resources as the bacterial detritus. 相似文献
This paper proposes a method to segment a set of models consistently. The method simultaneously segments models and creates correspondences between segments. First, a graph is constructed whose nodes represent the faces of every mesh, and whose edges connect adjacent faces within a mesh and corresponding faces in different meshes. Second, a consistent segmentation is created by clustering this graph, allowing for outlier segments that are not present in every mesh. The method is demonstrated for several classes of objects and used for two applications: symmetric segmentation and segmentation transfer. 相似文献
The aim of this study was to determine the characteristics of Russian patients with microsatellite instability (MSI) tumors. MSI in the tumor was determined in 514 patients with colon cancer using PCR and subsequent fragment analysis for five markers (NR21, NR24, BAT25, BAT26, and NR27). In the presence of microsatellite instability, the mismatch repair (MMR) system genes were examined using the NGS and MLPA methods to establish the diagnosis of Lynch syndrome. The overall frequency of MSI tumors was 15%: at stage I—19% (9/48), at stage II—21% (44/213), at stage III—16% (26/160), and at stage IV—2% (2/93). Patients with MSI tumors differed in the age of diagnosis, tumor localization, time of cancer recurrence, and stage of the disease. The overall and disease-free survival of patients whose tumors had MSI status was higher than that of patients with microsatellite-stable status, p = 0.04 and p = 0.02, respectively. Analysis of overall and disease-free survival of patients with Lynch syndrome and patients with sporadic colon cancer, but with MSI status, did not reveal significant differences, p = 0.52 and p = 0.24, respectively. The age of patients with Lynch syndrome was significantly younger than that of patients with sporadic colon cancer whose tumors had MSI status (p < 0.001). 相似文献
The use of seed‐mediated growth as a versatile approach to the synthesis of penta‐twinned Cu nanorods with uniform diameters and controllable aspect ratios is reported. The success of this approach relies on our recent synthesis of uniform Pd decahedra, with sizes in the range of 6–20 nm. The Pd decahedral seeds can direct the heterogeneous nucleation and growth of Cu along the fivefold axis to produce nanorods with uniform diameters defined by the lateral dimension of the original seeds. Due to a large mismatch in the lattice constants between Cu and Pd (7.1%), the deposited Cu is forced to grow along one side of the Pd decahedral seed, generating a nanorod with an asymmetric distribution of Cu, with the Pd seed situated at one of the two ends. According to extinction spectra, the as‐obtained Cu nanorods can be stored in water under the ambient conditions for at least six months without noticeable degradation. This excellent stability allows us to systematically investigate the size‐dependent surface plasmon resonance properties of the penta‐twinned Cu nanorods. With the nanorod transverse modes positioned at 560 nm, the longitudinal modes can be readily tuned from the visible to the near‐infrared region by controlling the aspect ratio. 相似文献