3HA: Hybrid Hole Healing Algorithm in a Wireless Sensor Networks

In wireless sensor networks (WSNs), the appearance of coverage holes over a large target field is mostly possible. Those holes reduce network performance and may affect the network efficiency. Several approaches were proposed to heal coverage holes in WSNs, but they still suffer from some weaknesses. In this paper we suggest a distributed algorithm, named hybrid hole healing algorithm (3HA), to find the minimum effective patching positions to deploy additional nodes to cover the holes. A hole manager node of each hole is responsible for operating the 3HA algorithm which requires two phases. The first phase finds all candidate patching positions using a Voronoi diagram. It takes all Voronoi vertices within the hole as the initial patching positions list. The second phase reduces as much as possible this list based on integer linear programming and on a probabilistic sensor model. The 3HA algorithm repeats the above phases in rounds, until all Voronoi vertices are covered. Simulation results show that our solution offers a high coverage ratio for various forms and sizes of holes and reduces the number of additional sensors when compared to some algorithms like the Perimeter-based, the Delaunay triangulation-based, the Voronoi-based, and the Trees-based coverage hole healing methods.

     

Sustainable biocarbon as an alternative of traditional fillers for poly(butylene terephthalate)-based composites: Thermo-oxidative aging and durability

Sustainable biocomposites have gained considerable interest as an alternative to conventional composites in recent years due to their cost-effectiveness and environmental friendliness. The aim of this study was to investigate the performance and durability behavior of biocomposites from sustainable biocarbon (BC) as compared to conventional established fillers. The poly(butylene terephthalate) (PBT) and its composites reinforced with BC, talc, and glass fiber (GF) were prepared and the durability performances was investigated. The study showed that BC/PBT biocomposites provided a lighter weight alternative to traditionally used fillers. After undergoes thermo-oxidative aging, the mechanical properties of BC/PBT biocomposite were deteriorated. The GF/PBT showed the most stable in retaining its mechanical properties in comparison to the talc/PBT and BC/PBT. The aging behavior and mechanism of the PBT composites were discussed. This study provides further insight on the durability-related properties progression of biocomposites as compared to traditional used fillers. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47722.     

Longitudinal bone mineral density changes in early rheumatoid arthritis

A prospective longitudinal study of patients with early RA was performed to examine the influence of disease duration, disease activity and physical activity on bone loss. Sixty-seven patients with non-steroid treated RA of less than 5 yr duration, including 16 patients with disease duration less than 6 months, had BMD measurements of the femoral neck and the lumbar spine over a 12-month period using dual energy X-ray absorptiometry. The BMD changes were compared with values from 72 control patients and were also correlated with serial measurements of disease activity (measured by the Stoke Index) and disability [measured by the Health Assessment Questionnaire (HAQ) score], at 3-monthly intervals over the 12-month period. No significant differences in BMD changes were found between RA patients and controls overall. Patients with disease duration of less than 6 months had significantly greater loss of BMD at the femoral neck (-3.9%, S.E.M. 1.5) than the remainder of the cohort (-0.2%, S.E.M. 0.7) (P = 0.02) and controls (-0.8%, S.E.M. 0.6). Lumbar spine BMD changes correlated with the initial Stoke Index (Rs-0.373, P = 0.01) but not mean Stoke Indices. There was no correlation of BMD changes with age or HAQ scores. These findings suggest that significant bone loss occurs within the first few months of disease in patients with RA.     

DMET: a computer package for the design of digital microwaveline-of-sight communication routes

The computer-aided design software package DMET (Digital Microwave Engineering Tool), which has been developed to meet the needs of the telecommunication engineering community involved in the design of line-of-sight digital microwave communication routes, is described. DMET can be used either by professionals or engineering students in such a way that efforts can be concentrated on the design objectives of the link rather than on cumbersome and tedious computations. This software package is particularly useful as a tool in teaching communication engineering students the basic practical steps involved in the design of line-of-sight radio communication links. Examples of antenna height computation and radio link budget computation using DMET are presented     

The polar cluster like behavior in Ti substituted BaZrO3 ceramics

In this paper we report the evolution of the polar cluster like behavior with the incorporation of Ti⁴⁺ ion in BaZrO₃ Ceramics. Dielectric behavior of BaZr_xTi_(1−x)O₃ (x = 1.00, 0.95, 0.90, 0.85) ceramics is studied in the temperature range from 300 to 30 K. Polar cluster like behavior becomes more prominent with the increase in content of Ti⁴⁺ ion. The dielectric relaxation is analyzed by Vogel–Fulcher relation and Arrhenius law. Frequency dependence of dielectric constant and low loss tangent of these materials can be useful for the potential applications at low temperature.     

Kinetics study of Ti[O(CH2)4OCHCH2]4 initiated ring‐opening polymerization of ε‐caprolactone by differential scanning calorimetry

Chemical shrinkage was used for the in situ measurement of the progressing chemical stabilization reactions and the influence of ozone during the stabilization of polyacrylonitrile. A method for evaluating the activation energy through the sensitivity temperature is presented. The calculated results show that the activation energies were 161.57 kJ/mol in air and 181.23 kJ/mol in ozone-enriched air. Therefore, the chemical reactions were postponed during stabilization in ozone-enriched air. Ozone seemed to act in three ways: first, ozone promoted the formation of the serious skin–core structure. Second, ozone accelerated the chemical reactions and shortened the stabilization time at lower heating rates. Third, ozone postponed the chemical reactions. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci 2008     

Scattering center parameterization of wide-angle backscattered datausing adaptive Gaussian representation

We present a scattering center extraction algorithm to parameterize the backscattered data from complex targets collected over large angular apertures. This parameterization is based on a scattering center model of the target, but includes an aspect-dependent amplitude function for each scattering center. A two-dimensional (2-D) adaptive Gaussian representation (AGR) algorithm is used to extract the position and the amplitude function associated with each scattering center. The algorithm is tested with data generated by the Xpatch radar simulation code as well as chamber measurement data. The results show that a very good compression ratio can be achieved, resulting in a compact scattering center model of the target. Once such model is available, we can easily reconstruct range profiles and ISAR images at any aspect on the same plane with good accuracy     

A nonblocking transaction data flow graph based protocol forreplicated databases

Replicated data management systems adopt the 1-copy serializability criteria for processing transactions. In order to achieve this goal, many approaches rely on obtaining votes from other sites for processing update requests. In the proposed approach, a technique for generation of precedence graphs for each transaction execution is analyzed. The transaction data flow graph approach is a fully distributed approach. The proposed technique, is free from deadlocks, and avoids resubmission of transactions     

Utility of the radial-deviated, thumb-abducted lateral radiographic view for the diagnosis of hamate hook fractures: case report

Data from all 225 women operated on for ectopic pregnancy in 1992-1994 at Sahlgrenska University Hospital were collected and compared with three previous cross-sectional investigations from our hospital (1975-1979, 1981-1982 and 1986-1987) in order to evaluate the extent to which surgical treatment and post-operative complications have changed over a 20 year period. Laparoscopic surgery, which was not possible in the 1970s, was used in almost 85% of the ectopic pregnancies in 1992-1994. Conservative treatment was still the most frequently used technique. The complication rate was 1.2% in 1975-1979 when only laparotomies were carried out. After the introduction of laparoscopic surgery (1986-1987), the complication rate rose significantly (7.3%) and continued to increase even when this procedure was established as routine (14.2% in 1992-1994). Post-operative complications were most frequent after conservative laparoscopic surgery (24.4%) while there were no complications after laparotomies. In spite of increasing complication rates the frequency of patients in pre-shock, as well as the proportion of patients with heavy intra-abdominal bleeding and tubal rupture, decreased over time.