Test and evaluation of a solar powered gas turbine system

This paper describes the test and the results of a first prototype solar powered gas turbine system, installed during 2002 in the CESA-1 tower facility at Plataforma Solar de Almería (PSA) in Spain. The main goals of the project were to develop a solar receiver cluster able to provide pressurized air of 1000 °C and solve the problems arising from the coupling of the receivers with a conventional gas turbine to demonstrate the operability of the system. The test set-up consists of the heliostat field of the CESA-1 facility providing the concentrated solar power, a pressurized solar receiver cluster of three modules of 400 kWth each which convert the solar power into heat, and a modified helicopter engine (OST3) with a generator coupled to the grid. The first test phase at PSA started in December 2002 with the goal to reach a temperature level of 800 °C at the combustor air inlet by the integration of solar energy. This objective was achieved by the end of this test phase in March 2003, and the system could be operated at 230 kWe power to grid without major problems. In the second test phase from June 2003 to August 2003 the temperature level was increased to almost 1000 °C. The paper describes the system configuration, the component efficiencies and the operation experiences of the first 100 h of solar operation of this very successful first test of a solar operated Brayton gas turbine system.     

Life prediction of LED-based recess downlight cooled by synthetic jet

This paper details the adaptation and implementation of a proposed hierarchical model to the reliability assessment of LED-based luminaires. An Edison base ? 6 in., compatible can, downlight ? LED replacement bulb, cooled by active synthetic jets, is used as the test vehicle. Based on the identified degradation mechanisms and the experimentally obtained degradation rate of the cooling device, the reduction in the heat sink enhancement factor, and thus the increase in the LED junction temperature, is determined as a function of time. The degradation mechanisms of the dual-function power electronics – providing constant power to the LEDs and to the drivers of a series of synthetic jets – are also analyzed and serve as the basis for a hybrid model which combines these two effects on the luminaire lifetime. The lifetime of a prototypical luminaire is predicted from LED lifetime data using the degradation analyses of the synthetic jet and power electronics.     

CO2管内流动沸腾干涸特性研究

CO₂被认为是一种理想的替代制冷剂,具有良好的环境特性和优良的热力学特性。与传统制冷剂相比,CO₂有着十分不同的流动沸腾换热特性,过程会发生干涸将使其换热能力大幅下降。然而现有的干涸点预测公式都是基于各自的实验数据拟合得出,由于数据点太少和变量参数范围受限导致关联式的预测结果存在偏差。所以,通过对17篇文献中搜集的4986个实验数据点进行整理,分析得出质量流率、热通量、饱和温度和管径等影响因素对干涸点的影响趋势,并将数据点按大小压力分别拟合得出了干涸点的预测公式,有90%的数据点偏差小于15%,对干涸点预测,防止传热恶化有重要意义。     

Phospholipid Cyclosporine Prodrugs Targeted at Inflammatory Bowel Disease (IBD) Treatment: Design,Synthesis, and in Vitro Validation

Novel phospholipid (PL)-cyclosporine conjugates were prepared and studied as potential prodrugs for inflammatory bowel disease (IBD). Our approach relies on phospholipase A₂ (PLA₂), which is overexpressed in the inflamed intestinal tissues, as the prodrug activator to potentially release cyclosporine at the site of inflammation. PL-cyclosporine prodrug conjugates with methylene linkers of various lengths between the sn-2 position of the PL and cyclosporine were synthesized and evaluated for in vitro activation. Surprisingly, despite previous work indicating that conjugates with six methylene linkers between the lipid and drug would suffer rapid enzymatic hydrolysis, with cyclosporine this was not observed. However, compounds with longer linkers (n=10, 12 methylene units) display complete release of the drug by PLA₂-catalyzed hydrolysis, thus demonstrating the importance and profound impact of structural fine-tuning. This study represents a proof-of-concept for our hypothesis and a first step towards a truly targeted IBD treatment with cyclosporine that could be administered throughout the GI tract.     

Transport of testosterone and estrogen from dairy-farm waste lagoons to groundwater

Although concentrated animal feeding operations constantly generate physiologically active steroidal hormones, little is known of their environmental fate. Estrogen and testosterone concentrations in groundwater and their distribution in sediments below a dairy-farm wastewater lagoon were therefore determined and compared to a reference site located upgradient of the farm. Forward simulations of flow as well as estrogen and testosterone transport were conducted based on data from the sediment profile obtained during drilling of a monitoring well belowthe dairy-farm waste lagoon. Testosterone and estrogen were detected in sediments to depths of 45 and 32 m, respectively. Groundwater samples were directly impacted by the dairy farm, as evidenced by elevated concentrations of nitrate, chloride, testosterone, and estrogen as compared to the reference site. Modeling potential transport of hormones in the vadose zone via advection, dispersion, and sorption could not explain the depths at which estrogen and testosterone were found, suggesting that other transport mechanisms influence hormone transport under field conditions. These mechanisms may involve interactions between hormones and manure as well as preferential flow paths, leading to enhanced transport rates. These types of interactions should be further investigated to understand the processes regulating hormone transport in the subsurface environment and parametrized to forecast long-term fate and transport of steroidal hormones.     

面向三维CAD模型的加权谱聚类算法研究

局部区域特征的重要程度对三维CAD模型的分类有很大影响.针对现有聚类算法未能有效利用此关键特征实现聚类,提出一种基于局部区域的加权谱聚类算法.该算法按局部区域在模型库中出现的频次计算权重,提高出现频次低但区分能力强的局部区域的重要程度,从而降低常见局部区域的重要程度;并将上述表达与严重依赖模型间相似度的加权谱聚类算法相结合作为权重信息.实验结果显示,该方法能较好地完成三维CAD模型聚类任务,最终得到的NMI值、V-measure值对比当前最优方法所得结果分别提高3％、4％.     

A Multi-Level Approach to Measuring the Benefits of an Erp System in Manufacturing Firms

This research study examines associations between the business characteristics of manufacturing firms and their perceived benefits from ERP system investments. the perceived ERP benefits are measured at two levels: (1) an enterprise level and (2) a specific IT module level. the perceived value for ERP investments was consistently better explained at the specific IT module level.     

Leadership and justice: Increasing non participating users’ assessment of an IT through passive participation

Allowing users to actively participate in the development and implementation of a new IS is supposed to increase their satisfaction with it. This type of participation, representing aspects relating to distributive and procedural justice, is increasingly impractical in current organizational settings, because many IS are used by thousands of employees and having them involved is impossible. Nonetheless, there are still benefits to be gained in other ways. Extrapolating from interactional justice, we proposed a passive participation method of engaging users. Its effect was tested in a large company in the USA and proved effective. Interactional justice, the perception of fairness in the way that people were treated at an interpersonal level, was found to increase user assessment of the value of their IS. Implications and expansions to interactional justice theory and how this antecedent affects IS implementation are discussed.