USB数据传输中CRC校验码的并行算法实现

文章介绍了用于USB总线数据传输的CRC校验的原理和算法，并且采用并行电路实现USB2．0中的CRC产生和CRC校验，与传统的串行电路实现相比，并行电路实现方法虽然在芯片面积上大于串行电路实现，但由于降低了时钟频率，电路更容易综合实现，并且大大降低了功耗，有利于低功耗电路设计。     

城市交通管理规划的评价体系

介绍了几种城市交通管理规划的评价体系，分析了常见的综合评价分析方法，并比较其适用对象，从而为综合评价方法的选择提供依据。     

钢管内径光电检测装置

介绍了一种检测细长钢管内径的光电检测装置。该装置利用线阵ＣＣＤ作传感器，采用８０３１单片机作为主控制。     

高压乙烯压缩机出入口管线振动分析及改造

为减轻高压乙烯压缩机出入口管线的振动,采用有限元建模方法,对管线结构固有频率及各阶振型进行分析计算,详细讨论了在管线同一位置加不同约束和在不同位置加同一约束的情况对管线振动的影响.最后,结合测试数据和现场实际情况提出了改造方案.实际使用结果证明改造措施有效,达到了预期的防振效果.     

时效和重新训练对Cu－Zn－Al合金组织与记忆性能的影响

用约束训练法对时效后的Ｃｕ－Ｚｎ－Ａｌ形状记忆合金进行了重新训练。结果表明，在未发生贝氏体转变的条件下，时效所导致的记忆衰减可以通过重新训练予以改善。透射电镜分析指出，重新训练后，发生了马氏体的再取向，因时效而导致的细条状、台阶状变体大部分消除，且变体间的结合方式变为自协作性良好的孪晶关系，从而改善了合金的记忆性能。     

淤泥地基上土石围堰设计方案的探讨

新会区东南、中南部属冲积平原,西江、潭江两水横贯其中,岛丘众多,主干道时分时合,纵横交错,形成广阔的沙田地带,因此,堤围上也修建了相当数量的水闸,以满足防洪、排涝、航运以及灌溉的要求。水闸多为破堤而建,需要填筑围堰来保证主体工程的顺利施工。沙田地区的地基往往比较松软,淤泥层较厚,下面以金牛头水闸重建加固工程为例,探讨淤泥地基上土石围堰设计。     

Study of trace elements in coal and mining wastes and its significance in China

In the world energy about 26% of all was dedved from coal combustion. Nearly 80% of the electricity produced in China is generated from coal. Coal will play the most important role in the coming 50 years as the past century in China. However one consequentially of the mining and combustion of coal is the mobilization of trace elements, especially trace metals, which have environmental and human health significance. Information on concentrations and distributions of potentially toxic elements in coal, and information On the modes of occurrence of these elements and the relations of the minerals in coal can help to predict the behavior of the potentially toxic trace metals dudng cleaning, combustion, weathering, and leaching.     

Activity Interaction Coefficients of Si in Cu-Ti-Si Melts at 1550℃

Activitibs of Si in binary Cu-Si and ternary Cu-Ti-Si melts were measured at 1 550℃ by using a method of chemical equilIbrium between gas and liquid. The activity interaction coefficients of Si in the melts have been determined from the experimental data (lny = -5.69. s = 6.69. P2: = -26.22. E; =-43.96) and activity interaction coefficients of Ti in binary Cu-Ti melt at 1550℃ has been estimated from Sommer's data based on the regular solution model (lny =-1 .10. : = 2.95.p:=-2.10).