Properties of poly(ethylene terephthalate)–poly(ethylene naphthalene 2,6‐dicarboxylate) blends with montmorillonite clay

The production and properties of blends of poly(ethylene terephthalate) (PET) and poly(ethylene naphthalene 2,6‐dicarboxylate) (PEN) with three modified clays are reported. Octadecylammonium chloride and maleic anhydride (MAH) are used to modify the surface of the montmorillonite–Na⁺ clay particles (clay–Na⁺) to produce clay–C18 and clay–MAH, respectively, before they are mixed with the PET/PEN system. The transesterification degree, hydrophobicity and the effect of the clays on the mechanical, rheological and thermal properties are analysed. The PET–PEN/clay–C18 system does not show any improvements in the mechanical properties, which is attributed to poor exfoliation. On the other hand, in the PET–PEN/clay–MAH blends, the modified clay restricts crystallization of the matrix, as evidenced in the low value of the crystallization enthalpy. The process‐induced PET–PEN transesterification reaction is affected by the clay particles. Clay–C18 induces the largest proportion of naphthalate–ethylene–terephthalate (NET) blocks, as opposed to clay–Na⁺ which renders the lowest proportion. The clay readily incorporates in the bulk polymer, but receding contact‐angle measurements reveal a small influence of the particles on the surface properties of the sample. The clay–Na⁺ blend shows a predominant solid‐like behaviour, as evidenced by the magnitude of the storage modulus in the low‐frequency range, which reflects a high entanglement density and a substantial degree of polymer–particle interactions. Copyright © 2005 Society of Chemical Industry     

Off-Site Exposure to Respirable Aerosols Produced during the Disk-Incorporation of Class B Biosolids

Field experiments were conducted at a Class B biosolids land application site in central Arizona to measure, model, and source-track the off-site transport of aerosols emitted when biosolids were disk-incorporated into soils. Real-time PM10 monitoring provided time-resolved aerosol information sufficient for verifying both off-site concentration and off-site exposure time model results. Under the conditions considered and at a distance of 165?m from the aerosol source, biosolids disk-incorporation resulted in an intermittent exposure to biosolids-derived aerosol concentration between 15 and 40?μg/m3 and an inhalable biosolids dose between 2 and 8?μg. Transport modeling predicted that these doses will decrease with increasing wind speed. In addition, three DNA sequence-based biosolids source tracking methods were applied to aerosol samples and confirmed the presence of biosolids in aerosols at 5, 65, and 165?m from the aerosol source. Field measurements and modeling indicate that the nature of biosolids-derived aerosol exposure is a series of intermittent high concentration puffs, rather than a continuous low concentration.     

A new technique for on-line and off-line high speed computation

A novel technique for both online and offline computation is presented. With this technique, a reconstruction analysis in elementary particle physics, otherwise prohibitively long, has been accomplished. It will be used online in an upcoming Fermilab experiment to reconstruct more than 100000 events per second and to trigger on the basis of that information. The technique delivers 40 gigaoperations per second, has a bandwidth on the order of gigabytes per second, and has a modest cost. An overview of the program, details of the system, and performance measurements are presented     

Family burden following traumatic brain injury.

Investigated burden experienced by 60 spouses and 71 parents who served as primary caregivers to individuals with traumatic brain injury (BI). Burden levels, as assessed by the Questionnaire on Resources and Stress (QRS-SF), were compared for spouses and parents. Both parents and spouses exhibited high levels of burden. Relative to spouses, parents reported significantly greater burden related to lifespan care. Spouses reported significantly less personal reward than did parents. The presence of social aggression and cognitive disability in the individual with BI was found to have a greater association with subjective burden of caregivers than was the presence of physical disability or injury severity. Results of previous studies with QRS-SF scores show that the responsibility assumed by spouses and parents of persons with BI was as great as that experienced by families of people with severe chronic physical disabilities. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

On the linear and nonlinear complexity profile of nonlinear pseudorandom number generators

We obtain lower bounds on the linear and nonlinear complexity profile of a general nonlinear pseudorandom number generator, of the inversive generator, and of a new nonlinear generator called quadratic exponential generator. The results are interesting for applications to cryptography and Monte Carlo methods.     

Aspects of orientation-dependent grain growth in extra-low carbon and interstitial-free steels during continuous annealing

The present work concentrates on the application of orientation imaging microscopy (OIM) based on the electron backscattered diffraction (EBSD) technique to the investigation of the microstructural evolution of an extra-low carbon (ELC) steel and a Ti-Nb-bearing interstitial-free (IF) steel, during continuous annealing. Aspects like the nucleation, the evolution of the recrystallized volume fraction and grain size of grains with different orientations, the interface area limiting recrystallized {111} regions, and the apparent growth rates have been considered. Different criteria have been applied in order to identify crystallites produced during annealing. During the first stages of annealing, a network of grain boundaries with misorientations higher than 10 deg is produced, mainly inside the deformed γ-fiber grains. The crystallites formed within this network, free from cells or subgrains at their interiors, can be considered as potential nuclei. However, among all, only some of them become effective due to an important selection. The {111} recrystallized grains have a significant size and number advantage as compared with other texture components, and a hard impingement between clusters of {111} grains is produced during grain growth. The effect of grain growth behind the recrystallization front seems to be negligible as compared with the grain coarsening produced by the migration of this front, driven by the cold-work stored energy.     

Optimization techniques for curved path computing

Participating media with an inhomogeneous index of refraction make light follow curved paths. Simulating this in a global illumination environment has usually been neglected due to the complexity of the calculations involved, sacrificing accurate physical simulations for efficient visual results. This paper aims to simulate non-linear media in a more reasonable time than previous works without losing physical correctness. Accuracy is achieved by solving the Eikonal equation of geometrical optics, which describes the path followed by a light beam that traverses a non-linear medium. This equation is used in the context of a photon mapping extension.     

Analysis of the effect of polypyrrole synthesis conditions on its capacity to reduce hexavalent chromium

This paper reports the capacity of polypyrrole to reduce toxic hexavalent chromium (Cr(VI)). The influence of using different electrolytes during the polymer's synthesis has been studied. To improve the reduction of Cr(VI), the parameters considered were the polypyrrole morphology and the amount of conducting polymer. Polypyrrole obtained by cyclic voltammetry at a low sweep rate using KBr as supporting electrolyte showed better performance for Cr(VI) reduction compared to coatings obtained by constant potential or cyclic voltammetry at high sweep rates.