Examination of chemical irritation and textural influence on food preferences in two age cohorts using complex food systems

The changes to the chemical senses of taste and smell that accompany ageing are widely documented, and there has been some evidence that these changes may influence food preferences of the older consumer. However, little is known about the loss of function of the residual senses of texture and chemical irritant perception and how such losses influence food preferences. A consumer panel comprising a young (20–35 years) and an older (>65 years) age cohort was recruited and sensory tests were conducted to determine perceived intensity, preferences and the possibility of cross modal interaction between the sensory modalities of chemical irritation and texture. Liquid, semi-solid and solid food systems were studied to enable comparisons to be drawn. Older consumers were less capable of discriminating between chemical irritation and texture stimuli, indicating loss of sensory function, but there was indication that higher levels of chemical irritation were preferred among older consumers in some texture types.     

用单芯片CDC和IDC提高精密度和准确度

传统的高精密电容检测和阻抗检测应用需要将一套收集的分立器件巧妙的组合起来以提供完整的测量解决方案。这种方法不仅在器件选择方面十分耗时，并且由于各个应用之间即使有很小的差异，也需要做大量设计验证、评估、优化和鉴定。     

Investigations of high-performance GaAs solar cells grown on Ge-Si/sub 1-x/Ge/sub x/-Si substrates

High-performance p/sup +//n GaAs solar cells were grown and processed on compositionally graded Ge-Si/sub 1-x/Ge/sub x/-Si (SiGe) substrates. Total area efficiencies of 18.1% under the AM1.5-G spectrum were measured for 0.0444 cm/sup 2/ solar cells. This high efficiency is attributed to the very high open-circuit voltages (980 mV (AM0) and 973 mV (AM1.5-G)) that were achieved by the reduction in threading dislocation density enabled by the SiGe buffers, and thus reduced carrier recombination losses. This is the highest independently confirmed efficiency and open-circuit voltage for a GaAs solar cell grown on a Si-based substrate to date. Larger area solar cells were also studied in order to examine the impact of device area on GaAs-on-SiGe solar cell performance; we found that an increase in device area from 0.36 to 4.0 cm/sup 2/ did not degrade the measured performance characteristics for cells processed on identical substrates. Moreover, the device performance uniformity for large area heteroepitaxial cells is consistent with that of homoepitaxial cells; thus, device growth and processing on SiGe substrates did not introduce added performance variations. These results demonstrate that using SiGe interlayers to produce "virtual" Ge substrates may provide a robust method for scaleable integration of high performance III-V photovoltaics devices with large area Si wafers.     

Long distance fiber-optic transmission of C-band microwave signals to and from a satellite antenna

We demonstrate here the use of high-speed semiconductor lasers and detectors with low loss optical fiber for the transmission of the 500-MHz C-band microwave signal spectrum to and from a satellite antenna. The optical system has low attenuation and large band, width, so the microwave signals can be transmitted directly at the microwave frequency (4 or 6 GHz) over 20 km of fiber without regeneration or qualization. The optical system introduces ≈ 1 dB or less of degradation for both low spectral density QPSK signals and high spectral density FM video signals present in typical satellite transmission systems. For the video signals, the signal to noise after AM conversion was reduced from 56 to 55 dB. The microwave drive level to the laser must be significantly larger (typically > -10 dBm) than the intensity noise of the laser, yet small enough (typically < 10 dBm) to reduce the intermodulation distortion signals to an acceptable level. The laser bias current must be several times threshold so that the resonance frequency is beyond the frequency band of interest (4-6 GHz in this case). A flat modulation response is then obtained, and the intensity noise and intermodulation levels are low.     

Blowtooth: a provocative pervasive game for smuggling virtual drugs through real airport security

In this paper, we describe a pervasive game, Blowtooth, in which players use their mobile phones to hide virtual drugs on nearby airline passengers in real airport check-in queues. After passing through airport security, the player must find and recover their drugs from the innocent bystanders, without them ever realising they were involved in the game. The game explores the nature of pervasive game playing in environments that are not, generally, regarded as playful or “fun”. This paper describes the game’s design and implementation as well as an evaluation conducted with participants in real airports. It explores the players’ reactions to the game through questionnaire responses and in-game activity. The technologies used in Blowtooth are, intentionally, simple in order for the enjoyment of the game to be reliant more on the physical environment rather than the enabling technologies. We conclude that situating pervasive games in unexpected and challenging environments, such as international airports, may provide interesting and unique gaming experiences for players. In addition, we argue that pervasive games benefit most from using the specific features and nature of interesting real-world environments rather than focusing on the enabling technologies.     

Stereotype Threat and Group Differences in Test Performance: A Question of Measurement Invariance.

Studies into the effects of stereotype threat (ST) on test performance have shed new light on race and sex differences in achievement and intelligence test scores. In this article, the authors relate ST theory to the psychometric concept of measurement invariance and show that ST effects may be viewed as a source of measurement bias. As such, ST effects are detectable by means of multigroup confirmatory factor analysis. This enables research into the generalizability of ST effects to real-life or high-stakes testing. The modeling approach is described in detail and applied to 3 experiments in which the amount of ST for minorities and women was manipulated. Results indicate that ST results in measurement bias of intelligence and mathematics tests. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Perception of Host Plant Volatiles in Hyalesthes obsoletus: Behavior, Morphology, and Electrophysiology

The Palearctic planthopper Hyalesthes obsoletus is the natural vector of the grapevine yellow disease Bois noir. Grapevine is an occasional host plant of this polyphagous planthopper. To deepen our knowledge of the role of plant volatile organic compounds for H. obsoletus host plant searching, we carried out behavioral, morphological, and electrophysiological studies. We tested the attraction of H. obsoletus to nettle, field bindweed, hedge bindweed, chaste tree, and grapevine by using a Y-shaped olfactometer. The results showed a significant attraction of male H. obsoletus to chaste tree, and of the females to nettle. Male H. obsoletus were repelled by odor from hedge bindweed. Ultrastructural studies of the antennae showed at least two types of olfactory sensilla at the antennal pedicel: plaque organs and trichoid sensilla. Volatile organic compounds from nettle and chaste tree were collected, and the extracts were analyzed by coupling gas-chromatography to both mass-spectrometry and electroantennography. The volatile organic compounds that elicited electrophysiological responses in male and female antennae were identified. These findings are discussed with respect to behavior of H. obsoletus males and females in the field.     

Risk-based approach to developing a national residue sampling plan for testing under European Union regulation for veterinary medicinal products and coccidiostat feed additives in domestic animal production

A ranking system for veterinary medicinal products and coccidiostat feed additives has been developed as a tool to be applied in a risk-based approach to the residue testing programme for foods of animal origin in the Irish National Residue Control Plan (NRCP). Three characteristics of substances that may occur as residues in food are included in the developed risk ranking system: Potency, as measured by the acceptable daily intake assigned by the European Medicines Agency Committee for Medicinal Products for Veterinary Use, to each substance; Usage, as measured by the three factors of Number of Doses, use on Individual animals or for Group treatment, and Withdrawal Period; and Residue Occurrence, as measured by the number of Non-Compliant Samples in the NRCP. For both Number of Doses and Non-Compliant Samples, data for the 5-year period 2008–12 have been used. The risk ranking system for substances was developed for beef cattle, sheep and goats, pigs, chickens and dairy cattle using a scoring system applied to the various parameters described above to give an overall score based on the following equation: Potency × Usage (Number of Doses + Individual/Group Use + Withdrawal Period) × Residue Occurrence. Applying this risk ranking system, the following substances are ranked very highly: antimicrobials such as amoxicillin (for all species except pigs), marbofloxacillin (for beef cattle), oxytetracycline (for all species except chickens), sulfadiazine with trimethoprim (for pigs and chickens) and tilmicosin (for chickens); antiparasitic drugs, such as the benzimidazoles triclabendazole (for beef and dairy cattle), fenbendazole/oxfendazole (for sheep/goats and dairy cattle) and albendazole (for dairy cattle), the avermectin ivermectin (for beef cattle), and anti-fluke drugs closantel and rafoxanide (for sheep/goats); the anticoccidials monensin, narasin, nicarbazin and toltrazuril (for chickens). The risk ranking system described is a relatively simple system designed to provide a reliable basis for selecting the veterinary medicinal products and coccidiostat feed additives that might be prioritised for residue testing.     

Framework for Assessing Robotic Dexterity within Flexible Manufacturing

With growing demand for flexibility in manufacturing processes, interest in dexterous industrial robots is increasing. To facilitate benchmarking, and to assess the suitability of these robots for flexible manufacturing tasks, there is a need to develop new methods of capturing the relevant performance characteristics of industrial robots. This research aims to show that the Boothroyd-Dewhurst (B-D) Design-For-Assembly method, an established method for optimizing manufacturing processes, can be effectively adopted to form the basis of a comprehensive robotic dexterity assessment within flexible manufacturing. A comparative study is conducted which shows that the B-D classification tables offer the most comprehensive solution due to the range of operations and artifacts considered. Building on these tables, a framework is developed for determining the suitability of a robot system within flexible manufacturing operations. In a sample test-case scenario involving a pick-and-place operation, the framework is shown to produce an accurate estimate of robot performance that can be easily compared to human data. The framework establishes a link between manufacturing operations and robot performance metrics, which addresses the current difficulty in robot integration and highlights the framework’s potential for adoption within flexible manufacturing.