Ionic conductivities and high resolution microscopic evaluation of grain and grain boundaries of cerium-based codoped solid electrolytes

Doped CeGdO and codoped CeGdOSmO compositions were synthesized, giving rise to nanoparticulate powders. Ionic conductivities at bulk and grain boundaries of the sintered samples were determined, exhibiting increased conductivity in the samaria-codoped samples. Scanning electron microscopy (SEM) showed a significant reduction in the grain size of samaria-codoped electrolytes. This reduced grain size of the codoped samples caused a reduction in Schottky barrier height, increasing oxygen vacancy concentration in the space-charge layer of the grain boundary and culminating in greater ionic conductivity in the boundary region. For the gadolinium doped samples, high resolution transmission electron microscopy images at grains showed the presence of large cluster of defects (nanodomains), hindering the movement of charge carriers and reducing ionic conductivity. However, the samaria-codoped system displayed better homogeneity at atomic level, resulting in reduced oxygen vacancy ordering and, consequently, smaller nanodomains and higher bulk (grain) conductivity. The reduced grain sizes and smaller nanodomains caused by codoping favor the ionic conductivity of ceria-based ceramics, doped with gadolinia and codoped with samaria.     

Machining characteristics and fracture morphologies in a copper-beryllium (Cu-2Be) alloy

The technology of materials removal is improved greatly by the introduction of advanced cutting tools like cubic boron nitride, ceramics, polycrystalline diamond and the more recent whisker-reinforced materials. In this paper, the influence of cutting temperature on machinability, mechanical properties, microstructure, and fracture morphology of Cu-2Be alloy using a polycrystalline diamond cutter is investigated. The information on machining, microstructure, and fracture morphology of Cu-2Be alloy are very useful to understand their fabrication characteristics and the basic mechanisms of its deformation and fracture. The machinability (in terms of surface finish) of Cu-2Be alloy is evaluated as a function of cutting temperature, resulting from wet and dry cutting. Machining is carried out on a Hardinge Cobra 42 CNC machine (Hardinge Inc., Elmira, NY), and the machining parameters used—cutting speed, depth of cut, and feed rate—are kept constant during both wet and dry cutting. The machined surface finish on Cu-2Be alloy is measured using a surface finish analyzer (Surftest 401, series 178) technique. The machined specimens are examined for their strength and hardness properties using a standard Universal Testing Machine and Rockwell hardness tester, respectively. Wet cutting (using coolants) produced a smooth surface finish when compared with dry cutting of the Cu-2Be alloy. The machined specimens are examined for their microstructural features using a Nikon optical microscope. The specimens are etched using a suitable etchant solution for revealing such microstructure constituents as grain size, phase proportions, and the possible overheated areas (especially in dry cutting). The fractured surfaces from the tensile and impact toughness tests are investigated for their fracture morphologies (dry and wet cutting) using a microprocessor-controlled scanning electron microscope (Jeol Model JSM 5910 LV). A detailed analysis is also made to understand and interpret the basic fracture mechanisms responsible for crack initiation and crack propagation. The Cu-2Be alloy showed relatively higher mechanical properties in wet cutting in comparison to dry cutting operations. Fracture studies demonstrated intergranular and ductile fractures as dominant modes of fracture mechanisms in Cu-2Be alloy.     

Effect of pressure on the structure and electrical conductivity of cardanol–furfural–polyaniline blends

Pressure‐sensitive polymers that simultaneously present reasonable electrical conducting properties, useful thermosetting behavior, and softness are hard to develop. To combine these properties into a single material, a cardanol‐based phenolic resin was prepared and blended in situ with polyaniline (PAni). The final polymer blend was composed of a soft solid material that could not be dissolved in ordinary solvents. Samples were characterized through X‐ray scattering, Fourier transform infrared (FTIR) spectroscopy, and electrical conductivity and pressure sensitivity measurements. FTIR results indicate that the insertion of PAni into the blends did not change the chemical nature of the resin. According to wide‐angle X‐ray scattering results, PAni was dispersed homogeneously in the final polymer samples; this improved the sensitivity of the electrical conductivity to pressure variations, as confirmed through electromechanical tests. Pressure sensitivity and electromechanical analyses indicated that the produced blends could be used as pressure‐sensing materials. Among the tested materials, the blends containing 5 wt % PAni·H₂SO₄ presented the largest compression sensitivity values. Finally, it was shown for the first time through XRD analyses under pressure that PAni chains were considerably disturbed by compressive stresses. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Disentangling Water Usage in the European Union: A Decomposition Analysis

The Water Framework Directive (WFD) defines common objectives for water resources throughout the European Union (EU). Given this general approach to water preservation and water policy, the objective of this paper is to analyse whether common patterns of water consumption exist within Europe. In particular, our study uses two methods to reveal the reasons behind sectoral water use in all EU countries. The first method is based on an accounting indicator that calculates the water intensity of an economy as the sum of sectoral water intensities. The second method is a subsystem input-output model that divides total water use into different income channels within the production system. The application uses data for the years 2005 and 2009 on water consumption in the production system of the 27 countries of the EU. From our analysis it emerges that EU countries are characterized by very different patterns of water consumption. In particular water consumption by the agriculture sector is extremely high in Central/Eastern Europe, relative to the rest of Europe. In most countries, the water used by the fuel, power and water sector is consumed to satisfy domestic final demand. However, our analysis shows that for some countries exports from this sector are an important driver of water consumption. Focusing on the agricultural sector, the decomposition analysis suggests that water usage in Mediterranean countries is mainly driven by final demand for, and exports of, agricultural products. In Central/Eastern Europe domestic final demand is the main driver of water consumption, but in this region the proportion of water use driven by demand for exports is increasing over time. Given these heterogeneous water consumption patterns, our analysis suggests that Mediterranean and Central/Eastern European countries should adopt specific water policies in order to achieve efficient levels of water consumption in the European Union.     

Analysis of the particle swarm algorithm in the optimization of a three-phase slurry catalytic reactor

The Particle Swarm Optimization (PSO) method was employed to optimize an industrial chemical process characterized by being difficult to be optimized by conventional deterministic methods. The chemical process is a three phase catalytic slurry reactor (tubular geometry) in which the reaction of the hydrogenation of o-cresol producing 2-methyl-cyclohexanol is carried out. The optimization problem was formulated considering as input variables the operating conditions of the reactor and as objective function the maximization of productivity, subject to the environmental constraint of conversion. The process was represented by a multivariable non-linear rigorous mathematical model and in order to solve the optimization problem, the performance of the PSO algorithm was evaluated considering four sets of parameters values suggested by the literature. PSO demonstrated to be efficient and robust to solve the constrained optimization problem, independently of the values of the PSO parameters. The solution of the rigorous mathematical model of the reactor was associated with a high computational burden, and although the PSO algorithm presented high rate of convergence, the attempt to make possible the optimization in a timeframe suitable to real time applications failed because the algorithm lost robustness (fraction of the number of runs the algorithm reached the optimization goal) when run with a reduced number of function evaluations. Therefore, if this type of application is desired, simplified mathematical models with fast and simple numerical methods must be preferred.     

全球大都市的景观变迁——从奇观城市到壮观城市

本文对新的全球化背景下,大型城市群的流行模式提出质疑,阐述了大规模城市土地溢出所带来的消极影响,强调需要对城市无限制扩张和区域不加控制的膨胀加以限制,并提出了通过多样景观、区域重组、区域性拼图城市等策略重建大都市的新景观,以实现从追求奇观城市和城市的奇观向壮观、美好新城市的转型。     

Ultrathin PECVD epitaxial Si solar cells on glass via low‐temperature transfer process

Fabrication of high‐quality ultrathin monocrystalline silicon layers and their transfer to low‐cost substrates are key steps for flexible electronics and photovoltaics. In this work, we demonstrate a low‐temperature and low‐cost process for ultrathin silicon solar cells. By using standard plasma‐enhanced chemical vapor deposition (PECVD), we grow high‐quality epitaxial silicon layers (epi‐PECVD) from SiH₄/H₂ gas mixtures at 175 °C. Using secondary ion mass spectrometry and transmission electron microscopy, we show that the porosity of the epi‐PECVD/crystalline silicon interface can be tuned by controlling the hydrogen accumulation there. Moreover, we demonstrate that 13–14% porosity is a threshold above which the interface becomes fragile and can easily be cleaved. Taking advantage of the H‐rich interface fragility, we demonstrate the transfer of large areas (∽10 cm²) ultrathin epi‐PECVD layers (0.5–5.5 µm) onto glass substrates by anodic bonding and moderate annealing (275–350 °C). The structural properties of transferred layers are assessed, and the first PECVD epitaxial silicon solar cells transferred on glass are characterized. Copyright © 2016 John Wiley & Sons, Ltd.     

Concentrations and determinants of organochlorine levels among pregnant women in Eastern Spain

Persistent organic pollutants (POPs) comprise a large variety of toxic substances with ample distribution. While exposure to these toxins occurs mainly through diet, maternal POP levels may be influenced by certain sociodemographic, environmental, or lifestyle factors. This is important given that these substances may have adverse effects on fetal development. The aim of this study is to examine the sociodemographic, environmental, lifestyle, and dietary determinants of the levels of hexachlorobenzene (HCB), b-hexachlorocyclohexane (b-HCH), 1,1,1-trichloro-2,2-bis(4-chlorophenyl)ethane (4,4′-DDT), 1,1-dichloro-2,2-bis(4-chlorophenyl)ethylene (4,4′-DDE), and polychlorinated biphenyls (PCB congeners 118, 138, 153, 180) measured in the blood of pregnant women participating in a mother-child cohort study conducted in Valencia (Spain).The study population consisted of 541 pregnant women who formed part of the INMA (Childhood and the Environment) cohort (2004-2006). POP levels were determined in blood taken during the 12th week of pregnancy with the aid of gas chromatography with electron capture detection. Sociodemographic, environmental, and dietary information was obtained from a questionnaire. Multivariate Tobit regression models were constructed in order to assess the association between POP levels and selected covariates.The results showed that all the women had detectable levels of at least one of these compounds while in 43% of the subjects, all eight compounds were detected. The compounds found in the greatest number of women were 4,4′-DDE (100%) and PCBs 153 and 180 (95%). The most important determinants of high POP levels were the mother's age, country of origin, increased body mass index, and number of weeks of breastfeeding after previous pregnancies. With regard to diet, 4,4′-DDT and 4,4′-DDE levels increased with the intake of meat, fruit, and cereal. PCB 153 levels increased with the intake of seafood. The levels of HCB, b-HCH, 4,4′-DDT, and 4,4′-DDE observed in this study were slightly higher than in other studies, whereas the PCB levels were similar.     

Detection of anti-Histoplasma capsulatum antibodies by the ELISA technique. Preliminary study

An indirect micro-ELISA system is presented for diagnosing histoplasmosis. The diagnostic criteria are defined by using sera from 12 patients who are histoplasmosis carriers. For this group, the optical density values were superior to 1,000; use was made of 43 sera from blood bank donors and 9 sera from children without a history of exposure. The optical density values in these cases were inferior to 0,200. The significant difference found led to the diagnostic criterion for confirming 3 histoplasmosis carriers who showed clinical manifestations but had been negative to double immunodiffusion. Thus, the usefulness of the proposed micro-ELISA system for early diagnosis was proved.     

Input–output analysis of alternative policies implemented on the energy activities: An application for Catalonia

The aim of this paper is to analyze the economic impact of alternative policies implemented on the energy activities of the Catalan production system. Specifically, we analyze the effects of a tax on intermediate energy uses, a reduction in intermediate energy demand, and a tax on intermediate uses combined with a reduction in intermediate energy demand. The methodology involves two versions of the input–output price model: a competitive price formulation and a mark-up price formulation. The input–output price framework will make it possible to evaluate how the alternative measures modify production prices, consumption prices, private real income, and intermediate energy uses. The empirical application is for the Catalan economy and uses economic data for the year 2001. The combination of a tax on energy uses and an improvement in the energy efficiency of the production system is a measure that accomplishes both economic and environmental goals, since it has no effects on prices, it has a positive effect on private real income and, finally, energy consumption is considerably reduced.