The thermoelastic behaviour of semicrystalline and of glassy poly(ether-ether-ketone)

A thermoelastic evaluation, based on simultaneous measurements of the mechanical work and of the concomitant heat of deformation by a stretching micro calorimeter, was performed on semicrystalline and glassy PEEK. The objective of this study was to utilize the sensitive technique to detect differences that would account for observed effects of micro structure on mechanical performance. A clear difference was detected beyond a 0.6% strain, where the behaviour of glassy PEEK began to exhibit inelastic features such as yielding and plastic deformation. This difference between the glassy and the semicrystalline polymers was considered the reason for the superior mechanical fatigue and fracture properties produced by the latter micro structure.     

Filament-wound composite soft tissue prostheses:controlling compliance and strength by water absorption and degradation

This paper deals with the effect of water absorption on the mechanical performance of selectively biodegradable filament-wound composite soft tissue prostheses. It shows how the water absorption phenomenon can be utilized as a new concept of material design, in contrast to the current view that associates moisture absorption by composite materials exclusively with damage. Harnessing water absorption to property design of vascular grafts has two advantages. The first is the controlled increase of the compliance of the graft during healing, aiming to reach a final stage of isocompliance with the host artery. The second is the water-induced biodegradation which enables regulation of the mural porosity during healing of an initially impervious graft. Filament-wound composite vascular prostheses comprising partially biodegradable matrices, different compositions and various winding angles are studied. Water absorption and material degradation are expressed in terms of relative weight gain/loss, which in turn is correlated with changes in the compliance and in the ultimate strength of the grafts.     

Hybrid pulse position modulation/ultrashort light pulse code-division multiple-access systems .I. Fundamental analysis

We propose a hybrid pulse position modulation/ultrashort light pulse code-division multiple-access (PPM/ULP-CDMA) system for ultrafast optical communications. The proposed system employs spectral CDMA encoding/decoding and PPM with very short pulse separation. The statistical properties of the encoded ULP are investigated with a general pulse model, and the performance of the proposed PPM/ULP-CDMA system is investigated. It is shown that we can improve upon the performance of other ULP-CDMA systems, such as those using on-off keying, by employing PPM. It is also shown that we can improve the performance of the proposed system by increasing the effective number of chips, by increasing the number of PPM symbols, and by reducing the ULP duration. The performance analysis shows that the aggregate throughput of the proposed PPM/ULP-CDMA system could be over 1 Tb/s.     

Lipid peroxidation and lysosomal integrity in different inflammatory models in rats: the effects of indomethacin and naftazone

The authors tried to establish quantitative and qualitative acoustic parameters of a good voice, suitable for future voice professionals. In their work they used long-time average spectrum analysis (LTAS) and three-dimensional analysis of periodicity (3D-PAN). They consider the regression straight line of formant regions and the parameters offered by 3D-PAN--jitter first of all--as the main acoustic parameters for the evaluation of voice quality and draw attention to the fact that acoustic parameters represent only one part of the evaluation of voice quality.     

Effect of some superplasticizers on the mechanical and physicochemical properties of blended cement pastes

Blended cement pastes made of Portland cement and fine sand (known in Egypt as El-Karnak cement) were made using a water–cement ratio of 0.25 by weight. Three pastes containing admixture (water-soluble condensates) were also prepared using a water–cement ratio of 0.25 and condensate (superplasticizer) content of 0.25% by the weight of cement; the superplasticizers used are Na-phenol sulfonate formaldehyde, Na-polystyrene sulfonate, and Na-ß-naphthol sulfonate formaldehyde condensates. All pastes were cured for various time intervals within the range of 0.02–90 days. Compressive strength tests, hydration kinetics, X-ray diffraction analysis, thermal analysis, and surface properties were studied and related as much as possible to the pore structure of the hardened pastes. © 1995 John Wiley & Sons, Inc.     

The use of wood pulp and radiation‐modified starch in wastewater treatment

Radiation‐induced graft copolymerization of maize starch/acrylic acid has been performed. Also, natural byproduct wood pulp was used after chemical treatment for the removal of metal ions from the investigated wastewater. The surface and structure morphology of the wood pulp and starch/acrylic acid were investigated by scanning electron microscopy and infrared spectroscopy. The physical parameters, such as swelling, gel percentage, and grafting efficiency (%) of starch/acrylic acid copolymer, were studied. The factors affecting the abilities of the prepared materials for removing heavy metal ions and dyes from aqueous solutions were studied. It was found that the maximum metal uptake is in the following sequence: Fe³⁺ > Cr³⁺ > Pb²⁺ > Cd²⁺. The adsorption capacity of such investigated metal ions increases with the increase of pH values. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci, 2006     

3-D Unitary ESPRIT: Accurate attitude estimation for unmanned aerial vehicles with a hexagon-shaped ESPAR array

Accurate estimation of the attitude of unmanned aerial vehicles (UAVs) is crucial for their control and displacement. Errors in the attitude estimate may misuse the limited battery energy of UAVs or even cause an accident. For attitude estimation, proprioceptive sensors such as inertial measurement units (IMUs) are widely applied, but they are susceptible to inertial guidance error. With antenna arrays currently being installed in UAVs for communication with ground base stations, we can take advantage of the array structure in order to improve the estimates of IMUs via data fusion. In this paper, we therefore propose an attitude estimation system based on a hexagon-shaped 7-element electronically steerable parasitic antenna radiator (ESPAR) array. The ESPAR array is well-suited for installment in the UAVs with broad wings and short bodies. Our proposed solution returns an estimation for the pitch and roll based on the inter-element phase delay estimates of the line-of-sight path of the impinging signal over the antenna array. By exploiting the parallel and centrosymmetric structure in the hexagon-shaped ESPAR array, the 3-dimensional Unitary ESPRIT algorithm is applied for phase delay estimation to achieve high accuracy as well as computational efficiency. We devise an attitude estimation algorithm by exploiting the geometrical relationship between the UAV attitude and the estimated phase delays. An analytical closed-form expression of the attitude estimates is obtained by solving the established simultaneous nonlinear equations. Simulations results show the feasibility of our proposed solution for different signal-to-noise ratio levels as well as multipath scenarios.