Microwave heating controlled reactive melt infiltration for graphite-Si-SiC ceramics manufacturing

In this work, we investigated a procedure which exploits microwave ovens to produce SiC- based components by reactive melt infiltration of silicon into graphite preforms. The employed oven is designed to grant optical access to the sample surface, which allows to measure its temperature evolution though a noncontact pyrometer. This signal was used as a feedback to control the power provided to the preform and as an experimental output whose analysis provides insight into the reaction mechanism. Specifically, it is found that complete infiltration is achieved much before the end of the reaction. The latter is not fully self-sustained as the global reaction rate continuously decreases with time until it is no more able to keep the temperature above the silicon solidification value. At that point, the reaction stops. The analysis of the processed samples proved that this procedure allows producing fully infiltrated samples without material failure by adjusting the heat provided during the infiltration stage rather than by tuning the preform structure and composition, which is the usual approach. The proposed method is less time and energy consuming than the standard one.     

Trends in Hydrological Parameters of a Southern Brazilian Watershed and its Relation to Human Induced Changes

The Piracicaba river basin is a subtropical watershed located in the southeastern region of Brazil. With an area of 12 400 km², the basin is a typical example of new landscape resulting from development in tropical and sub-tropical regions: establishment of intensive industrial and agricultural processes were followed by significant population growth and water management. This scenario has led to significant increase in water demand and decrease in water quality. The main objective of this study is the detection of changes in the patterns of flow and precipitation in the basin, and its possible relation to man-induced changes. Statistical analyses were performed on records of precipitation, evapotranspiration and streamflow, from 1947 to 1991. Precipitation and evapotranspiration totals showed significant increasing trends for the entire basin. From eight streamflow gauge stations, half showed significant decreasing trend. The most probable cause of such trends is the export of water from the basin to the metropolitan region of São Paulo city.     

Response of captive lowland gorillas (Gorilla gorilla gorilla) to different housing conditions: Testing the aggression-density and coping models.

Several studies have suggested that primates react differently to spatial reduction. In this article, the authors tested some general hypotheses on primate response to spatial reduction by studying the Apenheul lowland gorillas (Gorilla gorilla gorilla; Apeldoorn, the Netherlands). The frequency of conflicts did not greatly change between the 2 housing settings, thus not supporting the density- aggression model. Indoor, gorillas performed touching behavior more often and increased their level of reconciliation. These findings support the coping model. Indoor, the gorillas also maintained broader interindividual distances by increasing the levels of sitting alone, avoidance, and dismissing behaviors. In conclusion, the Apenheul gorillas modified selectively the distribution of some patterns typical of their behavioral repertoire in response to a high-density condition. Both avoidance and coping tactics were used, thus revealing high levels of behavioral flexibility in this species. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Comparison between normal and reverse thin crystalline silicon solar cells

The newly developed ingot growing techniques, as the three-grain and the columnar multigrain ingot processes, are now offering the possibility of slicing thinner wafers (≤ 100 μm). In this paper we present the results obtained on p type large area (≥ 100 cm²) and 100 μm thick wafers by using both conventional and reverse cell manufacturing technologies.The conventional cells are provided with aluminium or boron BSF plus screen-printed silver mirror or a silver-aluminium net; the reverse cells have a FSF and the deep back junction completely covered by a screen-printed or CVD silver layer.The constructing parameters have been chosen on the base of one and two dimensions modeling and both raw material and devices have been completely characterized.This work shows that very thin wafers do not introduce serious problems for the conventional manufacturing of solar cells. The efficiencies of the normal and of the reverse cells are found to be comparable and are of the same order than those of thicker cells, however at a significant lower cost. The main obtained result has to be related to the demonstration of a cell manufacturing feasibility starting from very thin wafers.     

Chalcogenide Glasses Based on Germanium Disulfide for Second Harmonic Generation

High second‐order susceptibilities are created by thermal poling in bulk germanium disulfide based chalcogenide glasses. Experimental conditions of the poling treatment (temperature, voltage, time) were optimized for each glass composition. The second‐order nonlinear signals were recorded by using the Maker fringes experiment and a second‐order coefficient χ⁽²⁾ up to 8 pm V^–1 was measured in the Ge₂₅Sb₁₀S₆₅ glass. This value is obtained using a simulation based on accurate knowledge of the thickness of the nonlinear layer. Two mechanisms are proposed to explain the creation of a nonlinear layer under the anode: the formation and the migration of charged defects towards the anode may mainly occur in Ge₂₀Ga₅Sb₁₀S₆₅ and Ge₂₅Ga₅S₇₀ glasses, whereas the migration of Na⁺ ions towards the cathode may be responsible for the accumulation of negative charges under the anode in Ge₃₃S₆₇ and Ge₂₅Sb₁₀S₆₅ glasses. Different electronic conductivity behaviors seem to be at the origin of the phenomenon. In parallel, the potential effect of the poling treatment on the structural and electronic properties is studied using Raman spectroscopy and secondary ion mass spectroscopy measurements.     

Results of bypasses to the anterior tibial artery through the interosseous membrane

Two month-old Wistar male albino rats were exposed during a 30-day period to a daily oral intake ad libitum of either 200 microg/mL Cd (as CdCl2), 0.1 microg/mL Se (as Na-selenite), or the same dosages of Cd + Se in drinking water. The daily intake from the water was calculated to be 15 mg Cd/kg and 7 microg Se/kg. Cadmium (Cd) accumulates in the heart (p < 0.005) and, in rats, decreases both body mass growth (p < 0.005) and heart mass (p < 0.02). Selenium (Se) significantly decreases the negative effect of Cd on body mass growth. In the hearts of Cd-treated rats, cadmium caused the decrease (p < 0.05) of selenium-dependent glutathione peroxidase (GSH-Px, EC 1.11.1.9) activity. At the same time, the activities of total superoxide dismutase (total SOD, EC 1.15.1.1), manganese-containing superoxide dismutase (Mn SOD), and copper-zinc-containing superoxide dismutase (CuZn SOD) were increased (p < 0.005). The activities of total SOD, CuZn SOD (p < 0.005), GSH-Px (p < 0.02), and glutathione-S-transferase (GST, p < 0.005) were increased in the hearts of Se-treated rats. However, by concomitant administration of Cd and Se, these changes were diminished (total SOD, GST) or were completely eliminated (Mn SOD, GSH-Px). These results indicate that Se only partly diminishes the effects of Cd cardiotoxicity.     

A VLSI structure forX(modm) operation

High-computing speed and modularity have made RNS-based arithmetic processors attractive for a long time, especially in signal processing, where additions and multiplications are very frequent. The VLSI technology renewed this interest because RNS-based circuits are becoming more feasible; however, intermodular operations degradate their performance and a great effort results on this topic. In this paper, we deal with the problem of performing the basic operationX(modm), that is the remainder of the integer divisionX/m, for large values of the integerX, following an approximating and correcting approach, which guarantees the correctness of the result. We also define a structure to computeX(modm) by means of few fast VLSI binary multipliers, which is exemplified for 32-bit long numbers, obtaining a total response time lower than 200 nsec. Furthermore, such a structure is evaluated in terms of VLSI complexity and area and time figuresA=?(n ² T _m ² ) andT=?(T _M ) for the parameterT _M in \([\log n,\sqrt n ]\) are derived. A simple positional-to-residue converter is finally presented, based on this structure; it improves some complexity results previously obtained by authors.     

Deep-MEG: spatiotemporal CNN features and multiband ensemble classification for predicting the early signs of Alzheimer’s disease with magnetoencephalography

Neural Computing and Applications - In this paper, we present the novel Deep-MEG approach in which image-based representations of magnetoencephalography (MEG) data are combined with ensemble...