Synthesis of thermally stable polyamides with pendant 1,3,4-oxadiazole units via direct polycondensation in ionic liquids

The synthesis of high molecular weight polyamides by using 1-methyl-3-alkyl imidazolium bromides (alkyl = C₃–C₈) as reaction media has been reported. Polymers were prepared from the reaction of 2-(5-(3,5-diaminophenyl)-1,3,4-oxadiazole-2-yl)pyridine, POBD, and aromatic/aliphatic dicarboxylic acids in ionic liquids in the presence of triphenyl phosphite as a condensing agent without requiring any extra components such as CaCl₂ or pyridine. The number average molecular weight of the polymers was measured by vapor pressure osmometry. The effects of various reaction parameters such as alkyl chain length of ionic liquids, reaction temperature, and reaction time on the molecular weight were investigated. No regular relationship between inherent viscosity or molecular weight with the alkyl chain length in the ionic liquid was observed; however, the highest molecular weight was observed in 1-butyl-3-methyl imidazolium bromide. The thermal properties of the prepared polymers were also studied with DSC and TGA methods. Removal of Co²⁺ from aqueous solutions was performed using polymer (7).     

New,organo‐soluble,thermally stable aromatic polyimides and poly(amide‐imide) based on 2‐[5‐(3,5‐dinitrophenyl)‐1,3, 4‐oxadiazole‐2‐yl]pyridine

New, thermally stable polyimides and a poly(amide‐imide) containing a 1,3,4‐oxadiazole‐2‐pyridyl pendant group based on 2‐[5‐(3,5‐diaminophenyl)‐1,3,4‐oxadiazole‐2‐yl]pyridine were synthesized. The synthesis and characterization of the model compound 2‐{5‐[(3,5‐bistrimellitimido)phenyl]‐1,3,4‐oxadiazole‐2‐yl}pyridine (DIDA) were also investigated, and DIDA was used in the preparation of the poly(amide‐imide) in an ionic liquid, 1‐butyl‐3‐methylimidazolium bromide, as a polymerization solvent. The polymers were characterized by separating and characterizing the poly(amic acid) intermediates using infrared and elemental analyses. The prepared polymers were soluble in polar and aprotic solvents, such as dimethylformamide, dimethylsulfoxide, N‐methyl‐2‐pyrrolidone and dimethylacetamide. Thermal behaviour of the polymers was studied using thermogravimetric analysis and differential scanning calorimetry. The inherent viscosities of the polyimide and poly(amide‐imide) solutions were in the range 0.34–0.85 dL g^?1 (in concentrated sulfuric acid with a concentration of 0.125 g dL^?1 at 25 ± 0.5 °C). The removal of Co(II) from aqueous solutions was performed using one of the polyimides. It was found that this polymer had a maximum adsorption capacity and efficiency at pH = 10.0. Copyright © 2012 Society of Chemical Industry     

Polymer–montmorillonite nanocomposites: Chemical grafting of polyvinyl acetate onto Cloisite 20A

This paper is an account of the experiments on grafting polyvinyl acetate onto organophilic montmorillonite. Cloisite 20A was reacted with vinyltrichlorosilane to replace the edge hydroxyl groups of the clay with a vinyl moiety. Because the reaction liberates HCl, it was performed in the presence of sodium hydrogencarbonate to prevent the exchange of quaternary alkylammonium cations with H⁺ ions. Only the silanol groups on the edge of the clay react with vinyltrichlorosilane. After the reaction, the product maintained the same basal spacing as the precursor. The radical polymerization of the product with vinyl acetate as a vinyl monomer leads to chemical grafting of polyvinyl acetate onto montmorillonite surface. The homopolymer formed during polymerization was separated from the grafted organoclay by Soxhelt extraction. Chemical grafting of the polymer onto Cloisite 20A was confirmed by infrared spectroscopy. The prepared nanocomposite materials and the grafted nano‐particles were studied by XRD, SEM, and TEM. Exfoliated nanocomposite was obtained for 0.5% clay content. Nanocomposites with 1% and 3% clay contents showed significant intercalation and agglomeration occurred at higher clay loadings. The nanocomposites were studied by thermogravimertic analysis (TGA) and dynamic mechanical analysis (DMTA). Improved thermo‐mechanical properties were observed for nanocomposite with 0.5% clay content. POLYM. COMPOS., © 2011 Society of Plastics Engineers.     

Nanocomposite materials based on isosorbide methacrylate/Cloisite 20A

This paper reports experiments on grafting of a new polymerizable monomer onto organophilic montmorillonite. The monomer, 5‐methacryloyloxy‐1,4:36‐D ‐anhydrosorbitol (MAS), was synthesized by reacting methacryloyl chloride and isosorbide in the presence of Et₃N as base. Then, Cloisite 20A was reacted with vinyltrichlorosilane to replace the edge hydroxyl groups of the clay with a vinyl moiety. Because the reaction liberates HCl, it was performed in the presence of sodium hydrogen carbonate to prevent the exchange of quaternary alkylammonium cations with H⁺ ions. Only the silanol groups on the edge of the clay react with vinyltrichlorosilane. After the reaction, the product maintained the same basal spacing as the precursor. The radical polymerization of the product with MAS as a vinyl monomer led to chemical grafting of the polymer onto the montmorillonite surface. The homopolymer formed during polymerization was separated from the grafted organoclay by Soxhlet extraction. Chemical grafting of the polymer onto Cloisite 20A was confirmed using infrared spectroscopy. The prepared nanocomposite materials and the grafted nanoparticles were studied using X‐ray diffraction and scanning and transmission electron microscopy. Exfoliated nanocomposite was obtained for 1 wt% clay loadings. The nanocomposites were studied using thermogravimetric and dynamic mechanical analyses. Improved thermal properties were observed for nanocomposites with 1–5 wt% clay content. © 2012 Society of Chemical Industry     

Novel POBD‐modified organoclay and its polyimide nanocomposites for removal of the Co(II) ion

An organophilic clay has been obtained via cation exchange reaction between sodium montmorillonite and the hydrochloride salt of 2‐(5‐(3,5‐diaminophenyl)‐1,3,4‐oxadiazole‐2‐yl)pyridine, POBD. Thermogravimetric analysis (TGA) showed that thermal decomposition of the organophilic clay starts at about 350°C, which shows that it is quite thermally stable compared with conventional montmorillonite modified with aliphatic long chain surfactants. POBD‐modified organoclay almost quantitatively removed the Co(II) ion from aqueous solution at pH = 10.0 (Q_t = 3.00 mg g⁻¹, R = 98.2%). A series of polyimide/clay nanocomposite materials (PCNs) consisting of POBD and benzophenone‐3,3′,4,4′‐tetracarboxylic dianhydride, BTDA were also prepared by an in situ polymerization reaction via thermal imidization. POBD‐modified organoclay was used as a surfactant at different concentrations. Intercalation of polymer chains within the organoclay galleries was confirmed by WXRD. Both the glass transition temperature and thermal stability are increased with respect to pristine PI at low clay concentrations. At high clay loadings, the aggregation of organoclay particles results in a decrease in T_g and thermal stability. In the SEM images of PCN 1 and 3%, too many micro cracks are observed in the background, and a flower‐shape pattern spreads uniformly over the entire surface. The maximum Co(II) uptake capacity and efficiency were observed at pH 10.0 within a 40‐h period for both PI and PCN films. POLYM. COMPOS., 2011. © 2011 Society of Plastics Engineers