Effects of Winding Attachment Positions on Output Characteristics of Flux‐Modulating Synchronous Machines

The flux‐modulating synchronous machine (FMSM) is a new type of multipole SM with nonoverlapping concentrated armature and field windings on the stator. This paper compares the output characteristics of two FMSMs through finite element analysis (FEA) and experiments. In both of the FMSMs, the attachment positions of the armature and field windings are swapped. To determine the reason for the discrepancies in their output characteristics, unsaturated inductances were calculated using a d‐‐q equivalent circuit. In addition, the calculated results of the inductances were confirmed through a visualization of the leakage fluxes using FEA. The results of the study show that the synchronous inductance can be reduced by attaching the armature winding to the air‐gap side of the stator teeth and that the reduction leads to an increase in output power.     

Anatase Sol Prepared from Peroxotitanium Complex Aqueous Solution Containing Niobium or Vanadium

Niobium- or vanadium-doped anatase sols were prepared by hydrothermal treatment of 0.1 mol/dm³ peroxotitanium complex aqueous solutions dissolving 0–10 mol% niobium or vanadium at 100°C for 8 h. Niobium-doping caused the increase of lattice constants of anatase and the shape change of anatase crystal from spindle-like to cubic-like structure, but no change of the optical absorbance. Vanadium-doping caused the decrease of lattice constant of c -axis, the miniaturization of anatase crystal and the increase of optical absorbance at the wavelength from 350–700 nm.     

Preparation of Laminin-apatite-polymer Composites Using Metastable Calcium Phosphate Solutions

A synthetic polymer with a laminin-apatite composite layer on its surface would be useful as a percutaneous device. The preparation of such a composite was attempted in the present study using poly（ ethylene terephthalate ） （PET） and polyethylene （PE） as the synthetic polymer. PET and PE plates and those pretreated with an oxygen plasma were alternately dipped in calcium and phosphate ion solutions, and then immersed in a metastable calcium phosphate solution supplemented with laminin （ LCP solution ）. The PET and PE plates pretreated with an oxygen plasma formed a uniform and continuous layer of a laminin-apatite composite on their surfaces. In contrast, the PET and PE plates that had not been pretreated with an oxygen plasma did not form a continuous layer of a laminin-apatite composite on their surfaces. The hydrophilic functional groups on the PET and PE surfaces introduced by the plasma treatment were responsible for the successful laminin-apatite coruposite coating.     

Pulmonary complications in hematological diseases

A clinical study was conducted to compare the analgesic effect of clonidine with those of sumatriptan and their mixture and their effects on hemodynamics. 40 patients undergoing elective total hysterectomy were randomly divided into 4 groups in terms of the epidurally administered drugs with 10 patients in each group (group C1: clonidine 150 micrograms, group C2: clonidine 75 micrograms, group S: sumatriptan 6 mg and group S + C: clonidine 75 micrograms + sumatriptan 3 mg). MAP, HR, SpO2, VT VAS, VRS and ePDT were measured in the initial 4 h. The demographic data and the doses of intraoperative local anesthetics among the 4 groups were not statistically different. It was found that no significant difference in the pre- and postadministration values of HR, SpO2 and VT. A obvious reduction of MAP appeared in the groups of C1 and C2, but in the other groups the hemodynamical parameters were stable. The groups of C1, C2 and S + C showed significant increase in VAS and VRS, along with increase of ePDT when compared with the pre-drug level. There was no obvious alteration in group S after the drug administration. It was concluded that (1) single use of sumatriptan is ineffective in the dose given in this study; (2) small dose (150 micrograms and 75 micrograms) of clonidine has epidurally analgesic effects; (3) combined use of sumatriptan and clonidine is an acceptable way in epidural analgesia, in terms of its analgesic effect and hemodynamic changes.     

Tunable laser for sensing atmospheric transmission in the infrared region of 11 ∼ 16 µm

We succeeded in observing the continuously tunable, pulsed InSb SFR (Spin-Flip Raman) laser emission in the infrared region of 11～16µm (11.4～16.3µm) from only one InSb device, merely by adjusting the pumping wavelength (11 lines from the infrared NH₃ laser) and the applied magnetic field (0～80 kGauss).     

A sensorless brushless dc motor system

This paper describes a brushless dc motor system without position or speed sensor. The brushless motor consists of a permanent magnet synchronous motor and a voltage-source inverter capable of controlling the amplitude and frequency of voltage. The rectangular-shaped stator current with a conducting interval of 120° (electrical) is controlled to be in phase with the trapezoidal back electromotive force. This results in producing maximum torque. Variable speed is achieved by adjusting the average motor voltage similarly to chopper control of dc motors. In this paper, two sensorless position detecting methods, i.e., an “indirect method” suited for the lower-speed range and a “direct method” suited for the higher-speed range are proposed. The combination of the two makes it possible to detect the rotor position over a wide-speed range. Furthermore, a speed-sen-sorless PLL control is proposed in applying the principle of the direct method. Experimental results obtained from a prototype brushless dc motor are shown to confirm the validity of the sensorless drive. The starting procedure of the motor also is discussed because it is impossible to detect the rotor position at a standstill.     

Electrophysiological elucidation of pathways of intrinsic horizontal connections in rat visual cortex

In single pass perfused rat liver, rapid osmotic water shifts across the plasma membrane in response to hyperosmolar urea were followed by monitoring liver mass and transient concentrating or diluting effects on Na+ concentration in effluent perfusate. Sudden addition or removal of hyperosmolar urea (200mM, resulting in a step change of the perfusate osmolarity from 305 to 505 mosmol/l) had little effect on liver mass or Na+ activity in the effluent perfusate, suggesting that urea equilibrated at a rate similar to that of water across the liver plasma membrane. When, however, phloretin (0.2mM) was present, sudden addition (removal) of urea (200mM) induced within seconds a marked and transient decrease (increase) of both liver mass and effluent Na+ concentration, suggestive of transient osmotic water shifts out of/into the cells. Although to a lesser extent, comparable effects were induced when urea was added/removed in the presence of the phloretin-related phenol compounds 2,4,6-trihydroxyacetophenone (5mM) and 2,4,5-trihydroxybutyrophenone (5mM). Phloretin-induced inhibition of urea export from livers preloaded with [14C]urea was reversible, and no saturation of urea transport was found at concentrations up to 200mM. In contrast to [14C]urea transport, [3H]water transport across the plasma membrane was not affected by phloretin. The data indicate that urea export across the hepatocyte plasma membrane is almost as fast as water export. The urea transport mechanism is sensitive to phloretin and other phenol compounds, works with high capacity and is distinct from the water-transporting system. The regulation of this putative transport mechanism and its relevance for hepatic nitrogen metabolism remain to be established.     

Transient analysis of an advanced static var compensator using quad-series voltage-source PAM inverters

This paper deals with an advanced static Var compensator (ASVC) using quad-series voltage-source PAM inverters. The ASVC consists of four three-phase voltage-source inverters with a common dc capacitor and four three-phase transformers, each primary winding of which is connected in series with each other. Each inverter outputs a square-wave voltage, while the synthesized output voltage of the ASVC has a 24-step wave shape. This results not only in a great reduction of harmonic currents and dc voltage ripples but also in fewer switching and snubbing losses. In this paper, transient analysis is performed with the focus on the response of reactive power and the resonance between the dc capacitor and ac reactors. Experimental results obtained from a small-rated laboratory model of 10 kVA are also shown to verify analytical results based on the p-q transformation. The analytical results help in the design of system parameters such as the capacity of the dc capacitor and feedback gains.     

DNA-inorganic hybrid material as selective absorbent for harmful compounds

Double-stranded DNA is one of functional polymers, but the large amounts of DNA sources, such as salmon milt and shellfish gonads, have been discarded as industrial wastes. Therefore, conversion of this discarded DNA to be a useful material would be beneficial to utilize the unique property of DNA. These materials including DNA have been prepared by mixing with the organic polymers, such as alginic acid, collagen, and chitosan. However, since these materials have consisted from entirely organic components, these do not have the mechanical strength for a material. So, we prepared the organic-inorganic hybrid materials by mixing DNA with silane coupling reagents bis(trimethoxysilylpropyl)amine or bis[(3-trimethoxysilyl)propyl]ethylenediamine. These hybrid materials with the flexibility were water-insoluble and resistant to hydrolysis by nuclease. In addition, the mechanical strength of this hybrid material was approximately twice as high as that of DNA without mixing with silane coupling reagents. Furthermore, the double-stranded DNA in the hybrid materials has been maintained in a B-form structure in aqueous solution. Thus, we demonstrated the utilization of DNA as a functional material. As a result, this material could selectively accumulate harmful DNA-intercalating compounds with the planar structure, such as dibenzo-p-dioxin, dibenzofuran, and ethidium bromide. Organic-inorganic hybrid material including double-stranded DNA has potential to serve as a useful biomaterial for medical, engineering, and environmental applications.