Crosslinked acrylic pressure‐sensitive adhesives. II. Effect of humidity on the crosslinking reaction

The effect of humidity during storage on the crosslinking reactions of isocyanate groups was investigated with attenuated total reflectance Fourier transform infrared spectroscopy with pressure‐sensitive adhesives composed of poly[ethyl acrylate‐co‐(2‐ethylhexyl acrylate)‐co‐(2‐hydroxyethyl methacrylate)] as a base resin and polyisocyanate as a crosslinker. A peak‐resolving analysis of the amide II region revealed four bands. According to an analysis of the Fourier transform infrared spectra of the model compounds, these four bands were assigned to free urethane linkages, hydrogen‐bonded urethane linkages, free urea linkages, and hydrogen‐bonded urea linkages. As expected, storage under humid conditions led to the formation of free and hydrogen‐bonded urea linkages corresponding to the promotion of isocyanate consumption. Peak resolution of the amide II region was found to be a reasonable way of monitoring urethane and urea linkages during crosslinking reactions. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 3039–3045, 2003     

Reduction mechanism of tioglycolic acid on keratin fibers using microspectrophotometry and FT-Raman spectroscopy

In order to investigate the reduction mechanism of thioglycolic acid (TG) on the keratin fibers, cross-sectional samples of white human hair treated with TG were prepared. The heterogeneous reaction between TG and keratin fibers involving the diffusion of TG into human hair was analyzed at the molecular level using microspectrophotometry and FT-Raman spectroscopy. The diffusion of TG into human hair clearly increased by increasing the treatment time and by raising pH. The TG relative concentration and the disconnected relative concentration of disulfide (–SS–) groups at various depths of the hair samples with pH 9.0 were in good agreement, indicating that the reaction rate (the disconnection of –SS– groups) was faster than the diffusion rate of TG into human hair. From these experiments, we demonstrated that TG diffuses gradually beyond the cuticle region, and toward the inside of the cortex region along with the disconnection of –SS– groups.     

Suppression control method for torque vibration of three-phase HB-type stepping motor utilizing feedforward control

This paper proposes a method to reduce the vibration of the three-phase HB-type stepping motor with cogging torque by the feedforward compensation control. The compensation signal to suppress the vibration of the motor frame is obtained by the repetitive controller installing an online Fourier transformer and utilizing an acceleration sensor attached to the motor frame or an acoustic sensor such as a microphone placed close to the frame. The sensor is used only for the acquisition of the feedforward compensation data. The feedforward compensation signal at an arbitrary operating point is derived from the amplitude and phase data of the frequency components and the operating point data. Compensation data obtained by the repetitive controller is applied to the operating point changed by reference frequency and load condition in steady state. The compensation signal for the new operating point will be generated from compensation data utilizing polynomial equation approximation and linear interpolation method. The effectiveness of this proposed method is confirmed by the experimental results.     

Dynamics and biogeochemical significance of the physical environment in Lake Biwa

We have examined two aspects of the dynamics and biogeochemical significance of the physical environment in Lake Biwa. One is the horizontal distribution of cyanobacteria as it relates to the ‘first gyre’ in the north basin of Lake Biwa. We could easily measure the first gyre using a vessel‐mounted acoustic doppler currents profiler. We were able to quantify the dynamics of the horizontal and vertical structure of currents and water temperature of this gyre. The first gyre did not remain at a fixed position; it moved north and south according to the growth of the gyre. This may play a role in the redistribution of cyanobacteria from place to place in the north basin. The second important environmental dynamic we measured was oxygen consumption rates from 1994 to 2000. We found that the minimum oxygen concentration in the hypolimnion has a clear inverse relationship with the apparent oxygen consumption rates in the 80–85 m depth layer. As a reduction in oxygen concentration in the hypolimnion can have a serious impact on benthic organisms, we concluded that the Lake Biwa environment should be monitored carefully and systematically.     

Preparation of gold nanoparticles (GNP) aqueous suspensions by a new method involving Tiron

A new method is proposed to produce gold nanoparticles (GNP) by in situ reduction of a gold salt dissolved in water. The reducing agent used is Tiron instead of the citrate anion most often mentioned in literature. The influence of various parameters has been investigated, such as the content of Tiron with respect to that of the precursor of gold HAuCl₄, or the initial pH of the solution after mixing of reactants. It is shown that Tiron also exerts a positive influence as a dispersant, which impedes agglomeration of gold nanoparticles. The typical average size of GNP synthesized in the present work is close to 7 nm.     

Response of inertinites from some Australian coals to non-catalytic hydrogenation in tetralin

Inertinite concentrates from three Australian bituminous coals were hydrogenated at various temperatures ranging from 350 to 475 °C in the presence of tetralin without any added catalyst. Both conversion yields and microscopic observations of the benzene-extracted hydrogenation residues have revealed that the hydrogenation of the inertinite macerals becomes significant only > 400 °C, whereas the dissolution-hydrogenation of the accompanying vitrinite macerals occurs mainly between 350 and 400 °C. The major reaction pathway for the inertinite particles in the hydrogenation process appears to be one of initial mild carbonization followed by hydrogenation. A simplified reaction scheme is proposed which describes the reaction pathway involved in the hydrogenation of inertinite.     

Characteristics of a far-infrared molecular laser optically pumped by a high-power CO2 laser

A molecular far-infrared (FIR) laser optically pumped by a high-power CO₂ laser, which is a powerful source for testing detectors and mixers and for FIR spectroscopy, is constructed and the performance is examined through experiments. At frequencies between 580GHz and 4.25THz, FIR output power is more than 20～30m W by pumping power of 35～81W. Amplitude stability of ±3% is obtained at 100m W output at 2.52THz for over 30 minutes when the FIR tube is cooled at 5°C by a chiller. As an application to testing mixers, FIR laser lines up to 4.25 THz are detected by Schottky barrier diodes (SBD). Further, using a SBD, performance of absolute frequency stability at 693GHz of HCOOH oscillation is measured by harmonic mixing with a 115.5GHz millimeter wave from a phase-locked Gunn oscillator. The resultant center-frequency stability is 100kHz per 10 minutes.     

Ossifying epithelioid hemangioendothelioma

A case of small epithelioid hemangioendothelioma encapsulated by an egg-shaped bony shell composed of newly formed mature lamellar bone is presented. A nodule measuring 10 x 5 x 5 mm was excised from inside of the right cheek muscle of a 46-year-old man. Histopathologically, the nodule consisted mainly of round-to-short spindled epithelioid cells with round nuclei and occasional cytoplasmic vacuoles associated with some foci of osseous metaplasia. Characteristically, egg shell-like lamellar bone enclosed this lesion showing well-circumscribed appearance. The main component cells were immunohistochemically stained positive for factor VIII-related antigen, CD 34, UEA-1, and vimentin, and proved to be vascular endothelial cells. The term ossifying epithelioid hemangioendothelioma is proposed for this unique lesion. This type of epithelioid hemangioendothelioma has not been previously reported to our knowledge, and differentiation from ossifying fibromyxoid tumor of soft parts is considered to be important.     

Trajectory design considering derivative of jerk for head-positioning of disk drive system with mechanical vibration

In this paper, we propose a novel design method of target trajectory for high-speed and high-precision head positioning of a hard disk drive (HDD) system. To realize smooth acceleration and deceleration, the derivative of jerk is considered not to activate any mechanical vibrations. We applied the well-known optimal control theory to fix the initial and terminal conditions. Moreover, we show that various performances can be improved by introducing time-varying weighting coefficients. Some experimental results using a 2.5-in HDD are shown to verify the effectiveness of the proposed method.     

Regenerating-mode low-speed operation of sensorless induction motor drive with adaptive observer

Speed estimation methods for sensorless induction motor drives can be divided into two groups. One is based on information about fundamental components of stator currents and voltages. The other is based on high-frequency components injection in stator voltages or currents. The latter may operate stably under zero frequency, which occurs in regenerating mode at low speeds. It, however, causes loss increasing and torque ripple. The former is difficult to operate under zero frequency. The authors propose a stable method categorized in the former group even in regenerating mode at low speeds. The proposed method is based on an adaptive flux observer. First, a new observer gain design is shown. Next, a method avoiding zero-frequency operation with controlling a rotor flux level is proposed.