Use of the Retarded Solution-Reprecipitation Process to Attain a Higher Initial Permeability in MnZn Ferrites

We investigated the effect of various amounts of liquid phase on microstructure development during sintering and the resulting magnetic permeability of MnZn ferrite (MZF) samples. Our results revealed that the microstructure and the final magnetic permeability depend on the thickness of the liquid-phase film during sintering. The solution-reprecipitation (S-R) process, which is associated with an intensive microstructure development in MZF, starts when a continuous liquid-phase film of critical thickness δ_o, which wets the MZF grains, is formed. The solid-state sintering that takes place before the formation of the continuous liquid-phase film is essential for the final microstructure of MZF.     

Cellulose as a binding material in graphitic anodes for Li ion batteries: a performance and degradation study

Four types of cellulose, in particular carboxy methyl cellulose (CMC), are tested as potential binding materials in graphitic anodes for lithium ion batteries. It is shown that a minimum content of a cellulose which gives acceptable anode properties (reversible capacity>300 mA h g⁻¹ during the first 10 cycles, irreversible loss<20%) is about 2 wt.%, which is less than in the case of conventional polymeric binders (5-10 wt.%). Kinetics of insertion-deinsertion and passivation processes seem not to be affected by the presence of cellulose. Explanation for the electrode failure at cellulose contents lower than 1 wt.% is given based on X-ray diffraction and microscopy investigations. Finally, the structure (distribution) of cellulose in the composite anode material is discussed and (indirectly) checked with a series of experiments. Most results are compared with the corresponding results obtained either with gelatin or conventional polymeric binders or both.     

Subsolidus grain growth in donor doped barium titanate

Grain growth in donor doped BaTiO₃ was studied below the temperature of liquid phase formation. It was found that a high donor concentration and high oxygen partial pressure effectively inhibit grain growth rate during sintering. Defect chemistry, derived from a model consistent with electrical measurements, well describes the grain growth properties of donor doped BaTiO₃ in the subsolidus grain growth region.     

Modelling the scatter of E–N curves using a serial hybrid neural network

If structural reliability is estimated by following a strain-based approach, a material’s strength should be represented by the scatter of the ε–N (E–N) curves that link the strain amplitude with the corresponding statistical distribution of the number of cycles-to-failure. The basic shape of the ε–N curve is usually modelled by the Coffin–Manson relationship. If a loading mean level also needs to be considered, the original Coffin–Manson relationship is modified to account for the non-zero mean level of the loading, which can be achieved by using a Smith–Watson–Topper modification of the original Coffin–Manson relationship. In this paper, a methodology for estimating the dependence of the statistical distribution of the number of cycles-to-failure on the Smith–Watson–Topper modification is presented. The statistical distribution of the number of cycles-to-failure was modelled with a two-parametric Weibull probability density function. The core of the presented methodology is represented by a multilayer perceptron neural network combined with the Weibull probability density function using a size parameter that follows the Smith–Watson–Topper analytical model. The article presents the theoretical background of the methodology and its application in the case of experimental fatigue data. The results show that it is possible to model ε–N curves and their scatter for different influential parameters, such as the specimen’s diameter and the testing temperature.     

The Low‐Temperature Cosintering of Cobalt Ferrite and Lead Zirconate Titanate Ceramic Composites

Magneto‐electric (ME) ceramic composites of cobalt ferrite (CoF) and lead zirconate titanate (PZT) were prepared by mechanical mixing of the constituent powders followed by cosintering. The cosintering conditions for nano‐sized CoF and submicrometer‐sized PZT powders were studied in detail. It was found that the CoF powder needs to be presintered at 700°C for 2 h to minimize the differences in the sintering kinetics of the constituent powders. Despite the low cosintering temperatures (900°C–1000°C) the interdiffusion of the cations from both phases was confirmed with energy‐dispersive X‐ray analysis and X‐ray diffraction. Efforts were made to optimize the cosintering conditions to prepare dense ceramic ME composites, which showed the converse ME effect.     

Upregulation of Cathepsin X in Glioblastoma: Interplay with γ-Enolase and the Effects of Selective Cathepsin X Inhibitors

Glioblastoma (GBM) is the most common and deadly primary brain tumor in adults. Understanding GBM pathobiology and discovering novel therapeutic targets are critical to finding efficient treatments. Upregulation of the lysosomal cysteine carboxypeptidase cathepsin X has been linked to immune dysfunction and neurodegenerative diseases, but its role in cancer and particularly in GBM progression in patients is unknown. In this study, cathepsin X expression and activity were found to be upregulated in human GBM tissues compared to low-grade gliomas and nontumor brain tissues. Cathepsin X was localized in GBM cells as well as in tumor-associated macrophages and microglia. Subsequently, potent irreversible (AMS36) and reversible (Z7) selective cathepsin X inhibitors were tested in vitro. Selective cathepsin X inhibitors decreased the viability of patient-derived GBM cells as well as macrophages and microglia that were cultured in conditioned media of GBM cells. We next examined the expression pattern of neuron-specific enzyme γ-enolase, which is the target of cathepsin X. We found that there was a correlation between high proteolytic activity of cathepsin X and C-terminal cleavage of γ-enolase and that cathepsin X and γ-enolase were colocalized in GBM tissues, preferentially in GBM-associated macrophages and microglia. Taken together, our results on patient-derived material suggest that cathepsin X is involved in GBM progression and is a potential target for therapeutic approaches against GBM.     

Hydrothermal Synthesis of Ba-Hexaferrite Nanoparticles

Barium hexaferrite BaFe₁₂O₁₉ nanoparticles with a single-domain size were synthesized using a controlled hydrothermal process involving the LaMer–Dinger principle and the Ostwald ripening mechanism. Nanocrystalline particles of BaFe₁₂O₁₉ were obtained when the molar ratio of the precursor composition Ba(OH)₂·8H₂O/γ-Fe₂O₃ was 0.3 and the concentration of the suspension was about 1 wt%. The as-synthesized crystalline BaFe₁₂O₁₉ platelets approximately 50 nm in length and 5 nm in thickness exhibited a saturation magnetization of 40 Am²/kg.     

Hydrothermal Synthesis of Manganese Zinc Ferrite Powders from Oxides

Manganese zinc (MnZn) ferrite powders were prepared via the hydrothermal treatment of a homogeneous mixture of the raw oxides (i.e., Fe₂O₃, ZnO, and Mn₃O₄ or MnO) at temperatures of 220°-320°C in air or an inert atmosphere. The final results of the hydrothermal reactions between the raw oxides were fine powders with a heterogeneous phase composition. In addition to lower concentrations of the residual reactants (Fe₂O₃, Mn₃O₄), two types of spinel-structure-based reaction products-ferrite ((Mn²⁺,Zn)Fe₂O₄) and manganate ((Zn,Mn²⁺)Mn₂³⁺O₄)-were detected after the synthesis. The composition of the ferrite products, as well as the ratio of ferrite products to manganate products, were mainly functions of the oxidation state of the manganese that was present during treatment. The oxidation state of manganese during reaction was dependent on the valence of the manganese in the starting manganese oxide and on the atmosphere in the autoclave during reaction. When the hydrothermal reaction was conducted in air, almost-pure zinc ferrite was identified, whereas during reaction in an inert atmosphere, MnZn ferrite was formed. The kinetics of the hydrothermal reactions also were dependent on the oxidation state of manganese, as well as the temperature and specific surface area of the starting Fe₂O₃.     

SARS-CoV-2 Spike Protein Binding of Glycated Serum Albumin—Its Potential Role in the Pathogenesis of the COVID-19 Clinical Syndromes and Bias towards Individuals with Pre-Diabetes/Type 2 Diabetes and Metabolic Diseases

The immune response to SARS-CoV-2 infection requires antibody recognition of the spike protein. In a study designed to examine the molecular features of anti-spike and anti-nucleocapsid antibodies, patient plasma proteins binding to pre-fusion stabilised complete spike and nucleocapsid proteins were isolated and analysed by matrix-assisted laser desorption ionisation–time of flight (MALDI-ToF) mass spectrometry. Amongst the immunoglobulins, a high affinity for human serum albumin was evident in the anti-spike preparations. Careful mass comparison revealed the preferential capture of advanced glycation end product (AGE) forms of glycated human serum albumin by the pre-fusion spike protein. The ability of bacteria and viruses to surround themselves with serum proteins is a recognised immune evasion and pathogenic process. The preference of SARS-CoV-2 for AGE forms of glycated serum albumin may in part explain the severity and pathology of acute respiratory distress and the bias towards the elderly and those with (pre)diabetic and atherosclerotic/metabolic disease.     

Improving the performance of Federated Digital Library services

The number of Digital Libraries (DLs) accessible over the Open Archives Initiative–Protocol for Metadata Harvesting (OAI–PMH) has been constantly increasing in the past years. Earlier efforts in the DL area have concentrated on metadata harvesting and provisioning of value-added Federated Digital Library (FDL) services to the users. FDL services, however, have to meet significant performance and scalability requirements, which is difficult to achieve in centralized metadata harvesting systems. The goal of the present study was to evaluate the benefits of using Web Services Resource Framework (WSRF) compliant grid middleware infrastructure for providing efficient and reliable FDL services. The presented FDL application allows for parallel harvesting of OAI–PMH compliant DLs. The results show that this approach efficiently solves the performance related problems, while it also contributes to greater flexibility of the system. The quality of service is improved as metadata can be updated frequently, and the system does not exhibit a single point of failure.