Microwave hybrid fast sintering of red clay ceramics

This work aimed to examine the performance of the hybrid sintering of clay ceramic in a microwave furnace, compared to the sintering process in a conventional furnace. The raw materials were subjected to X-ray fluorescence, loss on ignition (LOI), X-ray diffraction, particle size distribution, real specific mass, and thermogravimetric analyses. The red clay ceramic mass was prepared, extruded, pre-sintered in a conventional furnace at 600°C/60 min, and sintered at temperatures between 700 °C and 1100 °C. The sintering conventional (resistive oven) was carried out for 60 min with a heating rate of 10°C/min. In the microwave furnace, the sintering times were 5, 10, and 15 min, with a heating rate of 50°C/min, with a sintering chamber coated with silicon carbide (susceptor). The sintered specimens were characterized according to linear shrinkage, water absorption, apparent porosity, apparent specific mass, X-ray diffraction, Raman spectroscopy analysis, spectroscopy analysis in the ultraviolet and visible regions, microhardness, and scanning electron microscopy. The results showed that microwave sintering promoted an increase in the microhardness and apparent specific mass, and reduction in water absorption and apparent porosity values, due to greater densification in the microstructure. The best results occurred for specimens sintered at 1100°C.     

Robust predictive extended state observer for a class of nonlinear systems with time-varying input delay

ABSTRACT

This paper deals with asymptotic stabilisation of a class of nonlinear input-delayed systems via dynamic output feedback in the presence of disturbances. The proposed strategy has the structure of an observer-based control law, in which the observer estimates and predicts both the plant state and the external disturbance. A nominal delay value is assumed to be known and stability conditions in terms of linear matrix inequalities are derived for fast-varying delay uncertainties. Asymptotic stability is achieved if the disturbance or the time delay is constant. The controller design problem is also addressed and a numerical example with an unstable system is provided to illustrate the usefulness of the proposed strategy.     

Infrequent association: massive inguinoscrotal bladder hernia, multiple scrotal lithiasis, and bilateral obstructive uropathy]

BACKGROUND AND AIMS OF THE STUDY: Surgical treatment of functional tricuspid regurgitation associated with advanced valvular disease remains controversial, mainly due to the difficulty in choosing between valve replacement or reconstructive surgery. Failure to correct tricuspid regurgitation during valvular surgery carries a poor prognosis, as reoperation may represent a significant risk to the patient. Thus correct tricuspid valve surgery is vital to achieve improved early and long-term clinical results. METHODS: A total of 142 patients underwent concomitant tricuspid annuloplasty with mitral valve replacement and their clinical outcome was assessed. RESULTS: Overall hospital mortality rate was 11.3%. Seven patients died during follow up. The overall actuarial survival rate for 10 years was 74.1 +/- 14.2%. Postoperatively, 75.8% of the patients had no residual tricuspid insufficiency, while 24.2% had first- or second-degree tricuspid insufficiency and were treated medically. All patients were in NHYA functional class I or II postoperatively. CONCLUSION: Clinically, it is important to assess the severity of functional tricuspid insufficiency before and/or during the operation. Bicuspidalization annuloplasty for functional tricuspid insufficiency has provided good results, with a low incidence of reoperation and significant clinical improvement. The technique could be used in most patients with functional tricuspid regurgitation.     

A wind park reduced-order model using singular perturbations theory

Due to the increasing penetration of wind energy, it is necessary to possess design tools that are able to simulate the impact of these installations on electric utility grids. In order to provide a net contribution to this issue, a detailed wind park model has been developed and is briefly presented. However, the computational costs associated with the performance of such a detailed model in describing the behavior of a wind park composed by a considerable number of units may render its practical application very difficult. To overcome this problem, singular perturbations theory has been applied to reduce the order of the detailed wind park model, and therefore create the conditions for the development of a dynamic equivalent which is able to retain the relevant dynamics with respect to the existing AC power system. Validation results proving the ability of singular perturbations reduced order model to match the results provided by the detailed model are shown and commented upon     

Word sense disambiguation for spam filtering

Spam has become a major issue in computer security because it is a channel for threats such as computer viruses, worms, and phishing. More than 86% of received e-mails are spam. Historical approaches to combating these messages, including simple techniques such as sender blacklisting or the use of e-mail signatures, are no longer completely reliable. Many current solutions feature machine-learning algorithms trained using statistical representations of the terms that most commonly appear in such e-mails. However, these methods are merely syntactic and are unable to account for the underlying semantics of terms within messages. In this paper, we explore the use of semantics in spam filtering by introducing a pre-processing step of Word Sense Disambiguation (WSD). Based upon this disambiguated representation, we apply several well-known machine-learning models and show that the proposed method can detect the internal semantics of spam messages.     

Initial stages of tin electrodeposition from sulfate baths in the presence of gluconate

Tin electrodeposition in its initial stages in acid sulfate/gluconate baths was studied with varying tin and gluconate concentrations using potential-controlled electrochemical techniques. The deposit morphology was observed by scanning electron microscopy (SEM). A comparison with tin electrodeposition from acid sulfate baths in the absence of gluconate was also carried out. Use of a highly acidic bath leads to nonuniform deposits, even in the presence of gluconate; at pH 4 deposits are uniform, brilliant and suitable for finishing applications. Tin crystallites have a well defined morphology which depends on bath agitation conditions. In the absence of agitation, the crystallites have the same tetragonal shape as in a sulfate bath without gluconate.