Matrix Transformation in Boron Containing High-Temperature Co–Re–Cr Alloys

An addition of boron largely increases the ductility in polycrystalline high-temperature Co–Re alloys. Therefore, the effect of boron on the alloy structural characteristics is of high importance for the stability of the matrix at operational temperatures. Volume fractions of ε (hexagonal close-packed—hcp), γ (face-centered cubic—fcc) and σ (Cr₂Re₃ type) phases were measured at ambient and high temperatures (up to 1500 °C) for a boron-containing Co–17Re–23Cr alloy using neutron diffraction. The matrix phase undergoes an allotropic transformation from ε to γ structure at high temperatures, similar to pure cobalt and to the previously investigated, more complex Co–17Re–23Cr–1.2Ta–2.6C alloy. It was determined in this study that the transformation temperature depends on the boron content (0–1000 wt. ppm). Nevertheless, the transformation temperature did not change monotonically with the increase in the boron content but reached a minimum at approximately 200 ppm of boron. A probable reason is the interplay between the amount of boron in the matrix and the amount of σ phase, which binds hcp-stabilizing elements (Cr and Re). Moreover, borides were identified in alloys with high boron content.     

Kommunikationsoberfläche Membran‐ Vorbild für moderne Nanoanalytik

A central event in the life of a cellular system is the interaction between the exterior and the interior compartments. Biochemical signals arrive at the cellular surface, bind to their membrane bound receptor followed by a conformational change triggering the release of an internal chemical or electrical signal.This basic principle is followed by all our perceptive abilities like sense of smell or taste, but also by different signal transduction pathways involved in nerve conductivity, vision, sense of touch or hearing. To follow and mimic this principle of parallel registration is one of the aims of modern nanobiotechnology. If we are able to specifically biofunctionalize small arrays of a solid surface, which could be an electrode or a semiconductor, this approach will enable us to build up devices called “biochips” or “biosensors” that allow the determination of bioactive molecules with high specificity at lowest concentrations. Potential pharmacological active substrates might be screened as well as new receptors may be determined. Applications in genomics as well as proteomics are realistic. The major prerequisite for such a broad spectrum of applications is the fabrication of receptive surfaces. Biomolecules have to be surface‐adsorbed in a highly reproducible, oriented and well organised fashion, a task which in biology is taken by the cellular membranes as external or internal receptive surfaces. The physical principles like hydrogen bonds, electrostatic or hydrophobic interactions that lead to such an organized surface are well known. To synthesize molecular building blocks and to position them onto an otherwise unspecific surface is one of the challenges of nanobiotechnology combining biological knowledge and chemical skills with biophysical techniques that allow to handle or analyze even single molecules.     

MOBSY: Integration of vision and dialogue in service robots

Abstract. This contribution introduces MOBSY, a fully integrated, autonomous mobile service robot system. It acts as an automatic dialogue-based receptionist for visitors to our institute. MOBSY incorporates many techniques from different research areas into one working stand-alone system. The techniques involved range from computer vision over speech understanding to classical robotics. Along with the two main aspects of vision and speech, we also focus on the integration aspect, both on the methodological and on the technical level. We describe the task and the techniques involved. Finally, we discuss the experiences that we gained with MOBSY during a live performance at our institute.     

Fixed mesh front‐tracking methodology for finite element simulations

A direct front‐tracking method using an Eulerian–Lagrangian formulation is developed in two space dimensions. The front‐tracking method is general in that it can track any type of interface once its local velocity is specified or has been determined by calculation. The method uses marker points to describe the interface position and tracks the interface evolution on a fixed finite‐element mesh, including growth, contraction, splitting and merging. Interfacial conditions are applied directly at the interface position. The method is applied to three scenarios that involve different interface conditions and are based on energy and mass diffusion. The three calculations are for the dendritic solidification of a pure substance, the cellular growth of an alloy, and the Ostwald ripening of silica particles in silicon. Numerical results show that very complicated interface morphologies and topological changes can be simulated properly and efficiently. Copyright © 2004 John Wiley & Sons, Ltd.     

Balloon dilatation in acute myocardial infarct in routine clinical practice: results of the register of the Working Society of Leading Cardiologic Hospital Physicians in 4,625 patients

Balloon angioplasty as the treatment of first choice in the setting of an acute myocardial infarction (AMI) is gaining widespread acceptance because of favourable results from specialised centres concerning high patency rates and low mortality. This study reports the results of angioplasty for AMI at large community hospitals during 1992-1995. 4625 procedures were performed at 68 centres of the Arbeitsgemeinschaft Leitender Kardiologischer Krankenhaus?rzte (ALKK). The age of the patients was 60.8 +/- 11.3 years, with 75.1% men. The infarct related artery was the left anterior descendent in 43%, the right coronary artery in 37%, the circumflex artery in 16%, a bypass graft in 2.3% and the left main stem in 1.4% of patients. The success rate (residual stenosis < 50%) of the intervention was 86%. There was a wide range of procedures per centre, with a median of 40 AMI angioplasties per year and centre. The amount of angioplasties for AMI in relation to all angioplasties performed during this period rose from 5.2% in 1992 to 5.9% in 1995 (p = 0.01). Local complications at the puncture site occurred in 3.2%, with the need for a surgical intervention in 1.1% of patients. In 273 (5.9%) of the patients a second angioplasty was performed during the hospital stay. Aortocoronary bypass surgery was performed in 3% of the patients. Hospital mortality was 9.5% (438/4625 patients). The mortality rate remained constant during the years investigated (1992: 10.6%; 1993: 8.6%; 1994: 9.7%; 1995: 9.8%; p = ns). Higher mortality was observed in older patients, patients with multiple vessel disease, the left anterior descending artery or a bypass graft as infarct related artery as well as in patients with failed reperfusion (residual stenoses > 50%). Hospitals with a case load of more than 40 angioplasties for AMI per year showed a lower mortality as compared to the others. In clinical practice at large community hospitals results of angioplasty for AMI concerning mortality, complications and technical success rate are comparable to those of highly specialised centres. The absolute numbers of angioplasties for AMI increased constantly over the years.     

Kinetocardiotocography--follow-up of diazepam poisoning

Report about continuous fetal monitoring of heart rate and movements 9-30 hours after diazepam-intoxication. in an early stage after intoxication fetal movements are associated with FHF-decelerations, later on with accelerations. A sinusoidal like pattern may be caused by fetal suckling movements.