One step method of structure engineering porous graphitic carbon nitride for efficient visible-light photocatalytic reduction of Cr(Ⅵ)

Porous g-C3N4 nanosheets (PCN) were prepared by the nickel-assisted one-step thermal polymerization method.Hydrogen (H2) which was produced by the reaction between nickel (Ni) foam and ammonia (NH3) defined the structure and properties of PCN.During the formation of PCN,the participation of H2 not only enhanced the spacing between layers but also boosted the specific surface area that more active sites were exposed.Additionally,H2 promoted pores formation in the nanosheets,which was beneficial to the transfer of photons through lamellar structure and improved the absorption efficiency of visible light.Remarkably,the obtained PCN possessed better Cr(Ⅵ) photocatalytic reduction efficiency than pure g-C3N4.The reaction rate constant (k) of PCN (0.013 min-1) was approximately twice that of bare g-C3N4 (0.007 min-1).Furthermore,the effects of original pH and concentration of Cr(Ⅵ)-containing solution on removal efficiency of Cr(Ⅵ) were explored.A possible photocatalytic mechanism was proposed based on the experiments of radical scavengers and photoelectrochemical characterizations.     

Association of solid fuel use with risk of stunting in children living in China

Stunting adversely affects physical and mental outcomes of children. It has not been examined whether household air pollution from solid fuel combustion is a risk factor for stunting in children. In a total of 41,439 children aged 6-17 across China, height was measured using a unified protocol. Multivariable linear regression models and logistic regression models were used to assess the associations of solid fuel use for cooking/heating with stunting in children. Adjusted for covariates, cooking/heating with solid fuel was significantly associated with a lower z-score for height for age and sex (β = −0.21 [−0.32 to −0.09] and −0.17 [−0.31 to −0.03], respectively) and an increased risk of stunting with an estimated ORs of 1.34 [1.07~1.68] and 1.37 [1.02~1.83], respectively. The risk of stunting associated with solid fuel use was statistically significant in high-age children. And the effect was greater on girls than on boys, though the difference was not statistically significant. Our study suggested that Chinese children living in households using solid fuel had a significantly higher risk of stunting than those living in households using cleaner fuel.     

吸湿干爽性涤纶长丝的研制

采用德国吉玛公司直纺和日本东丽公司卷绕设备,探索差别化吸湿干爽性涤纶长丝的生产工艺。     

传感器网络中基于二元簇的节能路由算法

传感器网络中的分簇算法已经被证明能够有效地节约能量。据此提出了一种基于二元簇的路由算法,其基本思想是网络中的每个节点同时属于2个不同簇,利用二元性来减少在路由发现中的资源浪费,并能够更加确定地发现路由以节约资源。理论分析和模拟实验都表明,该算法在能量消耗和网络生命周期延长方面较优。     

水轮发电机组推力轴承油槽内流动及传热特性研究

为解决推力轴承瓦温过高的问题,采用数值模拟方法分析了某水轮发电机组推力轴承内循环冷却系统油槽内润滑油的流动及传热特性。结果表明,靠近镜板处油流速度大,远离镜板位置油流速度小;镜板内缘压力最低,沿着推力轴瓦径向向外压力逐渐增大;初始瓦温、初始油温一定时,随着水温降低,整体油温下降幅度并不大。根据研究结果,对推力轴承内循环冷却系统提出适当增大冷却器U型管直线段的长度、增大冷却器管径、提高冷却水的压力和流量、加大油冷却器铜管间距的改进建议。     

Trajectory tracking control for underactuated unmanned surface vehicle subject to uncertain dynamics and input saturation

Neural Computing and Applications - In this paper, one concerns with the problem of trajectory tracking control for an underactuated unmanned surface vehicle subject to uncertain dynamics and input...     

BPDA/ODA体系微支化交联聚酰亚胺薄膜制备与性能研究

以三官能度的1,3,5-三(4-氨基苯氧基)苯(TAPOB)为交联剂,在3,3′,4,4′-联苯四甲酸二酐(BPDA)和4,4′-二氨基二苯醚(ODA)体系聚酰亚胺(PI)薄膜中构建微支化交联结构,制备出一系列具有不同TAPOB含量的PI薄膜,研究了TAPOB含量对薄膜力学性能、热力学性能、介电性能和吸水率的影响.结果表明:TA-POB的引入可明显提高BPDA/ODA体系PI薄膜的综合性能,交联结构的存在有利于提高薄膜的力学性能、降低热膨胀系数(CTE)和吸水率,微支化结构则对降低介电常数有一定的作用.     

一种简单非线性PID控制在电液伺服系统中的应用研究

本文给出一种简单非线性PID控制器的设计方法。该控制器设计简单．有较好的适应性、鲁棒性和抗干扰性，通过其在电液伺服系统中的应用表明该方法的有效性和可行性，该控制方案能用于机器人等复杂的控制系统中，有较好的应用前景。     

Characterization of Apo-Form Selective Inhibition of Indoleamine 2,3-Dioxygenase**

Indoleamine-2,3-dioxygenase 1 (IDO1) is a heme-containing enzyme that catalyzes the rate-limiting step in the kynurenine pathway of tryptophan (TRP) metabolism. As it is an inflammation-induced immunoregulatory enzyme, pharmacological inhibition of IDO1 activity is currently being pursued as a potential therapeutic tool for the treatment of cancer and other disease states. As such, a detailed understanding of the mechanism of action of IDO1 inhibitors with various mechanisms of inhibition is of great interest. Comparison of an apo-form-binding IDO1 inhibitor (GSK5628) to the heme-coordinating compound, epacadostat (Incyte), allows us to explore the details of the apo-binding inhibition of IDO1. Herein, we demonstrate that GSK5628 inhibits IDO1 by competing with heme for binding to a heme-free conformation of the enzyme (apo-IDO1), whereas epacadostat coordinates its binding with the iron atom of the IDO1 heme cofactor. Comparison of these two compounds in cellular systems reveals a long-lasting inhibitory effect of GSK5628, previously undescribed for other known IDO1 inhibitors. Detailed characterization of this apo-binding mechanism for IDO1 inhibition might help design superior inhibitors or could confer a unique competitive advantage over other IDO1 inhibitors vis-à-vis specificity and pharmacokinetic parameters.     

冰箱门胆真空吸塑成型模具抽芯机构设计

在充分分析斜滑块抽芯机构运动及受力状态的基础上，介绍了一种利用脱模力抽芯的非气动抽芯机构设计方法，采用该方法设计的冰箱门胆吸塑模具结构紧凑、抽芯可靠、生产效率高。