Epoxy paint failure in B-52 fuel tanks: Part II. Influence of DIEGME concentration in the fuel on the failure process

A model has been proposed to explain the failure of the original BMS10-39 epoxy paint on upper vertical surfaces in B-52 fuel tanks. The model involves interaction of the paint with DIEGME, a fuel system ice inhibitor (FSII) in jet fuel, that is distilled from the liquid fuel. In this communication, distillation experiments used to support the model are refined to better match the mass transfer of vapor from fuel in a B-52 fuel tank at close to room temperature. The interaction of these lower temperature distillates with the paint affirms the earlier model. On the basis of these experiments it is proposed that paint failure may be controlled or eliminated by reducing the level of DIEGME in the fuel. Proposed changes in military jet fuel composition are detailed.     

Accelerating entry into supported employment for persons with severe psychiatric disabilities.

Tested the hypothesis that Ss with severe mental illnesses would achieve better vocational outcomes with an accelerated approach to supported employment (AASE), as compared to gradual approaches (GA) with prevocational training. 86 Ss (mean age 35.1 yrs) with a diagnosis of a serious mental illness, were randomly assigned to either the AASE, or the GA, which included a minimum of 4 mo prevocational training. Data were obtained on indicators of vocational outcomes over 2 yrs, and for a limited number of Ss (n=36), during the 4th yr of inception into the program. Initially, only 5% of Ss preferred prevocational training. After 1 yr, AASE Ss showed better outcomes for a range of indicators, including achievement of competitive employment, duration of employment and mean earnings. During the 4th yr, 59% of these Ss were competitively employed, as compared to only 6% of GA Ss. Rehabilitation is more effective using AASE than GA. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

The hygienic working practices of maintenance personnel and equipment hygiene in the Finnish food industry

The hygienic working practices of the maintenance personnel as well as the hygiene of the equipment in the food industry were investigated with questionnaires and microbial surveys. The protective clothing, washing of hands and tools as well as avoiding foreign bodies left on the production lines should be targeted when the hygienic working practices are developed for maintenance personnel. Based on the questionnaire to food processors, packaging machines, conveyers, dispensers, slicing and cooling machines were considered the most problematic pieces of equipment hygienically mainly because of poor hygienic design. In order to improve food safety, both the training of maintenance personnel in food hygiene and equipment design should be more emphasised.     

Influence of electroosmotic treatment on the hydro-mechanical behaviour of clayey silts: preliminary experimental results

Preliminary results of an investigation focused on the influence of electrokinetic treatment on the mechanical and hydraulic behaviour of clayey soils are presented. The experimental programme aims at providing a contribution to the sustainability of contaminant extraction or containment via electroosmosis. Changes in the hydraulic and mechanical properties of two illitic clayey soils, subjected to a DC electric field, were investigated. Samples of the two soils were subjected to electrokinetic filtration, for different periods of time, and under different constant loads. Afterwards, they were tested under one-dimensional compression to detect changes in stiffness and hydraulic conductivity due to the electrical treatment. After the application of a DC field for a few hours, a small reversible increment in the average soil stiffness was observed, with respect to the untreated soil, while the hydraulic conductivity was not affected substantially. Dramatic changes of the mechanical and hydraulic soil properties, correlated to changes of the soil pH, were observed following non-conditioned electrokinetic treatment with duration of the order of days.     

FEM model of the ohmic resistance of IP-SOFCs

In the present work, the ohmic resistance of an integrated planar-SOFC (IP-SOFC) has been evaluated by developing a model whose equations have been solved numerically through an FEM method. The model allows to estimate the distribution of voltage and current density in the cell. A comparison between simulated and experimental data of area specific resistance is reported, which shows satisfactory agreement. The mathematical model has also been used to carry out some parametric studies for optimisation purposes. Indeed, a reduction in cell pitch length and an increase in electrode thickness are predicted to lead to a reduction in ohmic losses in IP-SOFCs.     

Investigation of the thermal, mechanical, and fracture properties of alumina-epoxy composites

A combination of dynamic shear rheology, thermomechanical analysis (TMA), scanning electron microscopy (SEM), Near-Edge X-ray Absorption Fine Structure (NEXAFS), and fracture toughness testing was utilized to characterize the thermal, mechanical, chemical, and fracture properties of alumina (α-Al₂O₃)-filled epoxy resins as a function of average filler size, size distribution, particle shape, loading, and epoxy crosslink density. In general the cured properties of the filled composites were robust. Small changes in particle size, shape, and size distribution had little impact on the final properties. Resin crosslink density and filler loading were the most critical variables, causing changes in all properties. However, most applications could likely tolerate small changes in these variables also. SEM and NEXAFS characterization of the fracture surfaces revealed that the fracture occurs at the filler interface and the interfacial epoxy composition is similar to the bulk resin, indicating a weak epoxy-alumina interaction. These results are critical for implementation of particulate-filled polymer composites in practical applications because relaxed material specifications and handling procedures can be incorporated in production environments to improve efficiency.     

Neutron Reflectometry Characterization of Interface Width between Sol-Gel Titanium Dioxide and Silicon Dioxide Thin Films

Neutron reflectometry (NR) was used to directly measure the interface width between a titanium dioxide and a silicon dioxide film deposited by sol-gel processing. In a bilayer heated to 450°C, NR measurements showed that the interface width is 0.8 nm. This width is the same as the roughness of a sol-gel silicon dioxide surface after the same heat treatment, suggesting no interdiffusion or mixing at the bilayer interface.     

Relations between cardiac and vascular structure in patients with primary and secondary hypertension

BACKGROUND: Data on cardiac and vascular structure in secondary hypertension are generally scarce, and no data on the interrelations between cardiac mass and structural characteristics of the vessel wall, both in large and in small resistance arteries, are presently available. OBJECTIVES: The aim of this study was to investigate the relation between structural changes in subcutaneous small arteries, left ventricular mass and wall thickness of the common carotid artery in patients with primary and secondary hypertension. METHODS: Seventy-four subjects were included in the study: 11 patients with pheochromocytoma, 14 with primary aldosteronism (PA), 19 with renovascular hypertension (RVH), 18 with essential hypertension (EH) and 12 normotensive (NT) control subjects. All subjects were submitted to a biopsy of subcutaneous fat. Morphologic characteristics of subcutaneous small resistance arteries (relaxed diameter <300 microm) were directly evaluated using a micromyographic technique. All subjects were submitted to calculation of left ventricular mass index (LVMI) and common carotid artery intima-media thickness (CCIMT), using ultrasound technique. RESULTS: The correlation coefficients between the media to lumen ratio in subcutaneous small arteries (M/L) and LVMI or between M/L and CCIMT were closer in RVH than in pheochromocytoma, EH or NT; in PA the correlation coefficients were slightly less close than those in RVH. An excess prevalence of carotid plaques in RVH was observed. CONCLUSIONS: A close relation between small resistance artery morphology and cardiac or carotid artery structure may be observed in those hypertensive patients in whom the renin-angiotensin-aldosterone system is activated. In constrast, in NT, EH and pheochromocytoma no significant correlation between M/L and LVMI or CCIMT was observed.