Hybrid ARQ scheme employing TCM and packet combining

A new hybrid automatic repeat request scheme employing packet combining based on the Viterbi decoder is presented. It is shown that the proposed form of combining, together with a rearrangement of the signal constellation, can outperform similar forms of packet combining such as average diversity combining     

Peripheral nerve stimulation by time-varying magnetic fields

PURPOSE: A study was performed to assess the stimulation threshold for healthy adults using sinusoidally oscillating gradients. METHOD: One hundred thirteen healthy adults were examined in the study. ECG and physiological parameters were measured. All measurements were performed of both the head and the abdomen. The subjects were measured in the supine position with the region of interest positioned in the center of the gradient coils. The measurement was performed for three orthogonal, four oblique, and double oblique orientations. RESULTS: No volunteer reported painful, severe stimulation. The mean thresholds for peripheral stimulation in head and body measurement were similar: 85.5% of stimulation during examination of the head and 87.6% during measurements of the abdomen were reported when the y-gradient was used. CONCLUSION: The greatest frequency of reported stimulations occurs when the y-gradient is used. This was confirmed by the results and supports the hypothesis that orthogonal to the y-axis the body has its largest conductive loop, resulting in the strongest peripheral stimulation.     

Metrology of freeform shaped parts

The scope of this keynote paper is to present the state of the art in the metrology of freeform shapes with focus on the freeform capabilities of the most important measuring techniques and on related metrological issues. Some examples of products are presented, for which the metrology of freeform shapes is important to guarantee the desired functional performance of the product. A classification of freeform measuring tasks and the corresponding metrological requirements are presented. A review of the most important measuring techniques is presented along with their capabilities for freeform measuring tasks. Specification and verification of freeform surfaces, including data evaluation and comparison to specifications are discussed, along with the measurement uncertainty and traceability of freeform measurements.     

Calibration of bistatic polarimetric radar systems

A calibration technique for laboratory type polarimetric, bistatic instrumentation radars is presented. It describes the errors induced by the standard radiation transfer approach (I-SRT) in a way similar to that for the monostatic case. A 12-term error correction and absolute polarimetric calibration is performed with two external reference targets. Only the polarimetric bistatic reference of the first target must be theoretically determined. The scattering reference of the second target is determined by a measurement during the calibration process (single reference calibration). The simulation of a third cross-polarization measurement is performed by an antenna rotation and a remeasurement of the second target. Thus all data are gained for the determination of the error terms and measurements of unknown objects can be full polarimetrically calibrated. The procedures are shown for an adapted dihedral corner reflector. Misalignment errors are discussed     

Production and properties of micro‐porous glas bubble zinc and aluminium composites

Micro‐porous syntactic foams were produced by means of integration of glass bubbles into aluminium and zinc matrices. Preforms of glass bubbles were pressure infiltrated with the alloys AlSi9Cu9 ans ZnAl4Cu using squeeze casting. The preforms were sintered thermically without the use of bonding agents. Using the combination of different sintering steps syntactic foams with locally different densities could be produced. The mechanical properties of the foams were tested indicating a high compression strength of the foams and a very good compression energy absorption. Furthermore, corrosion behaviour and behaviour at higher temperatures were investigated.     

Implementation of sustainable sanitation in existing urban areas: long-term strategies for an optimised solution.

If technologies for decentralised sanitation and reuse (DESAR) and for natural stormwater management should at least partially replace existing systems, then intensive reconstruction work becomes essential. A conversion can only be realised successively over a long period due to high construction and financial expenses and requires new strategies. This paper presents the development and practical implementation of a mathematical tool to find an optimised strategy for the realisation of alternative and more decentralised drainage and sanitation concepts in existing urban areas. The succession of construction measures (e.g. the implementation of decentralised greywater recycling) for the whole period of consideration is determined based upon a mathematical optimisation model on the condition that the favoured future state is known. The model describes the complex interdependencies of the urban water and nutrient cycle and enables the minimisation of both financial efforts and ecological impacts on the way toward the future state. The results of the implementation for a rural area in Germany show that the mathematical optimisation is an adequate instrument to support decision-making processes in finding strategies for the realisation of sustainable urban water management.     

Schnelle Lochkorrosion durch ungewöhnliche Anodenstabilisierung in einem Stahl/Wasser-System

Fast pitting corrosion in a steel/water system as a result of unusual stabilization of anodes Corrosion damage as a result of fast pitting was observed in industrial equipment made of unalloyed steel. The rate of formation and the manifestation of the pits are similar to pitting corrosion of stainless steels. Estimation of the kinetics of the localized corrosion in terms of differential aeration cells led to a model which indicates the stabilization of small anodic regions. The stabilization was caused by precipitation of the products of reaction between ferrous ions and polymeric silicate. The high rate of pitting also suggests that the oxygen entering the system during service periods involving the exposure of the system to air has enhanced the corrosion. These ideas could be substantiated by experiments, which also revealed particularly the effect of the concentration of NaCl. Anodic passivation by the addition of Na₂CO₃ or perhaps inhibition may be considered as candidate protective measures.     

Runoff and infiltration characteristics of pavement structures--review of an extensive monitoring program.

The stormwater runoff and infiltration performance of permeable pavements has been systematically evaluated within an intensive monitoring program. The primary objective of the investigation was to generate a broad database, which enables the development of an advanced simulation module for urban drainage modelling. Over 160 field and lab scale experiments have been completed and analyzed for surface runoff and infiltration characteristics. The test series include several pavement types under various boundary conditions such as diverse precipitation impacts, varying surface slope and layer construction as well as different stages of surface clogging and several base and subgrade layer characteristics. The results represent a reliable and comprehensive database that allows profound conclusions and substantial recommendations.     

The stability of duplexes involving AT and/or G4EtC base pairs is not dependent on their AT/G4EtC ratio content. Implication for DNA sequencing by hybridization

Sequencing by the recently reported hybridization technique requires the formation of DNA duplexes with similar stabilities. In this paper we describe a new strategy to obtain DNA duplexes with a thermal stability independent of their AT/GC ratio content. Melting data were acquired on 35 natural and 27 modified duplexes of a given length and of varying base compositions. Duplexes built with AT and/or G4EtC base pairs exhibit a thermal stability restrained to a lower range of temperature than that of the corresponding natural compounds (16 instead of 51 degrees C). The 16 degrees C difference in thermal stability observed between the least stable and the most stable duplex built with AT and/or G4EtC base pairs is mainly due to the sequence effect and not to their AT/G4EtC ratio content. Thus N -4-ethyl-2'-deoxycytidine (d4EtC) hybridizes specifically with natural deoxyguanosine leading to a G4EtC base pair whose stability is very close to that of the natural AT base pair. Oligonucleotide probes involving d4EtC can be easily prepared by chemical synthesis with phosphoramidite chemistry. Modified DNA targets were successfully amplified by random priming or PCR techniques using d4EtCTP, dATP, dGTP and dTTP in the presence of DNA polymerase. This new system might be very useful for DNA sequencing by hybridization.