Measurement of Electrophysiological Signals In Vitro Using High-Performance Organic Electrochemical Transistors

Biological environments use ions in charge transport for information transmission. The properties of mixed electronic and ionic conductivity in organic materials make them ideal candidates to transduce physiological information into electronically processable signals. A device proven to be highly successful in measuring such information is the organic electrochemical transistor (OECT). Previous electrophysiological measurements performed using OECTs show superior signal-to-noise ratios than electrodes at low frequencies. Subsequent development has significantly improved critical performance parameters such as transconductance and response time. Here, interdigitated-electrode OECTs are fabricated on flexible substrates, with one such state-of-the-art device achieving a peak transconductance of 139 mS with a 138 µs response time. The devices are implemented into an array with interconnects suitable for micro-electrocorticographic application and eight architecture variations are compared. The two best-performing arrays are subject to the full electrophysiological spectrum using prerecorded signals. With frequency filtering, kHz-scale frequencies with 10 µV-scale voltages are resolved. This is supported by a novel quantification of the noise, which compares the gate voltage input and drain current output. These results demonstrate that high-performance OECTs can resolve the full electrophysiological spectrum and suggest that superior signal-to-noise ratios could be achieved in high frequency measurements of multiunit activity.     

Macrophage Immunomodulation Through New Polymers that Recapitulate Functional Effects of Itaconate as a Power House of Innate Immunity

Itaconate (ITA) is an emerging powerhouse of innate immunity with therapeutic potential that is limited in its ability to be administered in a soluble form. A library of polyester materials that incorporate ITA into polymer backbones resulting in materials with inherent immunoregulatory behavior is developed. Harnessing hydrolytic degradation release from polyester backbones, ITA polymers result in the mechanism specific immunoregulatory properties on macrophage polarization in vitro. In a functional assay, the polymer-released ITA inhibits bacterial growth on acetate. Translation to an in vivo model of biomaterial associated inflammation, intraperitoneal injection of ITA polymers demonstrate a rapid resolution of inflammation in comparison to a control polymer silicone, demonstrating the value of sustained biomimetic presentation of ITA.     

Normal-incidence InAs self-assembled quantum-dot infrared photodetectors with a high detectivity

An InAs/AlGaAs quantum-dot infrared photodetector based on bound-to-bound intraband transitions in undoped InAs quantum dots is reported. AlGaAs blocking layers were employed to achieve low dark current. The photoresponse peaked at 6.2 /spl mu/m. At 77 K and -0.7 V bias, the responsivity was 14 mA/W and the detectivity, D*, was 10/sup 10/ cm/spl middot/Hz/sup 1/2//W.     

Adherence to pharmacologic management of hypertension

Adherence to pharmacologic therapy of hypertension is low (in the range of 50-70%) and has important implications both for blood pressure control and cardiovascular complications. Based on a review of the literature using the levels of evidence grading technique, determinants of adherence to the pharmacologic therapy of hypertension have been assessed. Additionally, interventions to improve compliance were evaluated. Patient-centred, health care provider-centred and drug-specific factors have all been shown to affect adherence rates. We conclude that the extent of adherence to pharmacologic therapy is modifiable. Measurable improvements in adherence can be obtained from simplified medication regimens and a combination of behaviour strategies, including the tailoring of pill-taking to patients' daily habits and rituals, the advocacy of self-monitoring of pills and blood pressure, and the institution of reward systems.     

Transmission electron microscopic analysis of kidney glomeruli obtained by fine-needle aspiration

Aspiration biopsy of tumors and transplanted organs is a popular atraumatic method for diagnosis and also for the management of patients. Apart from the cytological analyses, it is clear that large aggregates of cells are obtained and these may be examined by electron microscopy. A study was carried out with dogs to assess the yield of intact glomeruli and tubules, resulting from a standard fine-needle aspiration procedure. Employing a 20-gauge needle, yields of approximately ten intact glomeruli were obtained with a tissue processing protocol that utilized filtration through a nylon mesh and backwashing, to resuspend the trapped aggregates. Processing for electron microscopy was carried out in microcentrifuge tubes. The ultrastructural preservation was excellent and the extension of these studies to investigations of not only renal transplantation, but also for diagnosis in human renal diseases of a broad spectrum, is suggested.     

Microstructural engineering applied to the controlled cooling of steel wire rod: Part I. Experimental design and heat transfer

The goal of this study was to develop a mathematical model which incorporates heat flow, phase transformation kinetics, and property-structure-composition relationships to predict the mechanical properties of steel rod being control cooled under industrial conditions. Thus, the principles of microstructural engineering have been brought to bear on this interdisciplinary problem by combining computer modeling with laboratory measurements of heat flow, austenite decomposition kinetics, microstructure and mechanical properties, and industrial trials to determine heat transfer and obtain rod samples under known conditions. Owing to the length and diversity of the study, it is reported in three parts,_[8191]the first of which is concerned with the heat flow measurements. A relatively simple and reliable technique, involving a preheated steel rod instrumented with a thermocouple secured at its centerline, has been devised to determine the cooling rate in different regions of the moving bed of rod loops on an operating Stelmor line. The measured thermal response of the rod has been analyzed by two transient conduction models (lumped and distributed parameter, respectively) to yield overall heat-transfer coefficients for radiation and convection. The adequacy of the technique has been checked by cooling instrumented rods under well-defined, air crossflow conditions in the laboratory and comparing measured heat-transfer coefficients to values predicted from well-established equations. The industrial thermal measurements have permitted the characterization of a coefficient to account for radiative interaction among adjacent rod loops near the edge and at the center of the bed. Formerly Graduate Student, The University of British Columbia.     

Ethnic differences in the length of the menstrual cycle during the postmenarcheal period

In 1989, 125 African-American and 123 European-American girls aged 12-14 years were enrolled in a 2-year study in which they maintained a menstrual calendar, recording the date and amount of menstrual bleeding. Weight, exercise, and stress during the previous week were recorded at the start of each menstrual cycle. Although only minor ethnic differences were observed in expected cycle length (29.3 vs. 28.8 days for European-American and African-American girls, respectively), more prominent differences were observed in the between-subjects standard deviation of cycle length (2.9 vs. 2.2 days, respectively) and in the odds of having a cycle longer than 45 days (odds ratio=1.86, 95% confidence interval 1.17-2.97) for European-American compared with African-American girls. Low weight for height and high levels of exercise increased the probability of having a cycle longer than 45 days and decreased expected cycle length of 13- to 45-day cycles. Additional investigation of potential ethnic differences in menstrual cycle characteristics is warranted.     

Phosphorus Inputs to Lake Simcoe from 1990 to 2003: Declines in Tributary Loads and Observations on Lake Water Quality

Total phosphorus (TP) inputs to Lake Simcoe have led to hypolimnetic dissolved oxygen (DO) depletion and loss of cold water fish habitat. Since 1990, efforts have been made to reduce the total TP input to the lake below a defined target of 75 t/year, which was predicted to lead to reductions in spring TP concentration and improvements in end-of-summer hypolimnetic DO concentrations. The total TP load to the lake during the most recent period of record (1998/99-2003/04) ranged from 53 to 76 t/yr and averaged 67 t/yr, compared to an average of 114 t/yr estimated between 1990/91 and 1997/98 (range 85-157 t/yr). Reductions in TP loads from the catchment via tributary discharge (∼26 t) accounted for the majority of the decrease in total load between the two time periods. Total P concentrations decreased significantly in four out of six long-term monitored tributaries; however, concentrations in all six tributaries remain above the level recommended to avoid nuisance plant growth (30 μg/L). Although TP loads to the lake are currently below the target 75 t/yr, excessive growths of filamentous algae and macrophytes continue to be a problem in the nearshore zone. End-of-summer minimum hypolimnetic DO concentrations (average 4.3 mg/L, 1998/99-2003/04) remain substantially below the level (7 mg/L) that is considered protective of lake trout. Efforts to reduce TP loads to the lake therefore need to continue.