Mechanical and microstructure studies on the modification of CA film by blending with PS

DriedMusa paradiciaca (banana) stem and veins of the leaves, which were hitherto discarded as a waste, were collected and used as starting material for the preparation of cellulose and cellulose acetate. This cellulose acetate was mixed with polystyrene to form blend of cellulose acetate-polystyrene in order to provide enhanced stability and extended utility to the end products. The films of these composites or their individual partners were made separately and studied for their mechanical properties, chemical modification and morphological changes. We report here that banana stem is good source of cellulose and that cellulose completely undergoes modification upon esterification.     

Comparative study of crystallization processes in Sb2Te3 films using laser and thermal annealing techniques

Adherent and pin-hole free amorphous Sb₂Te₃ thin films have been obtained by vacuum evaporation at substrate temperatures ≤25 °C. The films have been crystallized by thermal and laser annealing, and the crystallization processes monitored as a function of annealing temperature and laser scan speed. A comparative study of topography reveals disk-shaped crystallized areas in thermal crystallization and dendrite growth in the laser induced process. The crystallized films in both cases contain a single Sb₂Te₃ phase. Activation energy of 2 eV for crystallization, determined using differential scanning calorimetery indicates good room temperature stability of the amorphous states.     

Object-oriented intelligent computer-integrated design, processplanning, and inspection

The methodology for developing intelligent integrated computer-aided design and manufacturing systems based on object-oriented principles is discussed. The ways in which the application of these principles affects the nature of these systems are reviewed. The implementation of an automated, intelligent, and flexible computer-integrated-manufacturing (CIM) system prototype using an object-oriented programming environment (Smalltalk-80, Version 4.0) is detailed. A CIM system includes CAD, a process planner, and an inspection planner. Each of these components is discussed individually     

Effect of layering pattern on dynamic mechanical properties of randomly oriented short banana/sisal hybrid fiber–reinforced polyester composites

Dynamic mechanical test methods have been widely employed for investigating the structures and viscoelastic behavior of polymeric materials to determine their relevant stiffness and damping characteristics for various applications. Randomly oriented short banana/sisal hybrid fiber–reinforced polyester composites were prepared by keeping the volume ratio of banana and sisal 1 : 1 and the total fiber loading 0.40 volume fraction. Bilayer (banana/sisal), trilayer (banana/sisal/banana and sisal/banana/sisal), and intimate mix composites were prepared. The effect of layering pattern on storage modulus (E′), damping behavior (tan δ), and loss modulus (E″) was studied as a function of temperature and frequency. Bilayer composite showed high damping property while intimately mixed and banana/sisal/banana composites showed increased stiffness compared to the other pattern. The Arrhenius relationship has been used to calculate the activation energy of the glass transition of the composites. The activation energy of the intimately mixed composite was found to be the highest. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 2168–2174, 2005     

Thermal gas effusion from diamond-like carbon films

Good-quality diamond-like carbon films (6 at.% H₂, 2400 kgf/mm² microhardness, 2.7 eV bandgap, higly insulating) have been obtained by the DC glow discharge decomposition of acetylene. Mass spectroscopic thermal effusion measurements were carried out on the films deposited under different deposition conditions. Analyses of hydrogen in conjunction with hydrocarbon effusing species yield information on the microstructure and nature of C---H bonding configurations. It is shown to be a useful analytical tool to study hydrogenated amorphous carbon films of different microstructures varying from polymer-like to diamond-like.     

Micro-computed tomography scanning approaches to quantify,parameterize and visualize bioturbation activity in clogged streambeds: A proof of concept

Fine particle clogging and faunal bioturbation are two key processes co-occurring in the hyporheic zone that potentially affect hyporheic exchange through modifications in the sediment structure of streambeds. Clogging results from excessive fine sediment infiltration and deposition in rivers, and it is known to decrease matrix porosity and potentially reduce permeability. Faunal bioturbation activity may compensate for the negative effect of clogging by reworking the sediment, increasing porosity, and preventing further infiltration of fines. Although both processes of clogging and bioturbation have received significant attention in the literature separately, their combined effects on streambed sediment structure are not well understood, mostly due to the lack of a standard methodology for their assessment. Here, we illustrate a novel methodology using X-ray computed tomography (CT), as proof of concept, to investigate how, together, clogging and bioturbation affect streambed porosity in a controlled flow-through flume. By visualising gallery formations of an upward conveyor macroinvertebrate; Lumbriculus variegatus as a model species, we quantified bioturbation activity in a clogged streambed, focusing on orientation, depth, and volume at downwelling and upwelling areas of the flume. Gallery creation increased the porosity of the streambed sediment, suggesting a potential improvement in permeability and a possible offset of clogging effects. We illustrate the promising use of X-ray CT as a tool to assess bioturbation in clogged streambeds, and the potential role of bioturbation activity supporting hyporheic exchange processes in streambeds, warranting further studies to understand the extent of bioturbation impacts in natural systems.     

Single point incremental forming: state-of-the-art and prospects

Incremental sheet metal forming in general and Single Point Incremental Forming (SPIF) specifically have gone through a period of intensive development with growing attention from research institutes worldwide. The result of these efforts is significant progress in the understanding of the underlying forming mechanisms and opportunities as well as limitations associated with this category of flexible forming processes. Furthermore, creative process design efforts have enhanced the process capabilities and process planning methods. Also, simulation capabilities have evolved substantially. This review paper aims to provide an overview of the body of knowledge with respect to Single Point Incremental Forming. Without claiming to be exhaustive, each section aims for an up-to-date state-of-the-art review with corresponding conclusions on scientific progress and outlook on expected further developments.     

Thermodynamic properties of alumina-saturated iron-carbon-bismuth alloys

Using direct and indirect equilibration methods, the solubilities of iron in molten bismuth and those of bismuth in molten iron-carbon alloys have been measured over the temperature range 1473-1873 K. The Henrian behaviour of bismuth in molten ferrous alloys allows the calculation of its activity coefficient, which in turn facilitates modelling as a function of temperature and carbon content, using the unified interaction parameter formalism developed by Pelton and Bale. The modelling results generate the expression: . A model has also been developed expressing bismuth content in molten iron-carbon alloys as a function of temperature and composition: .     

Analysis of frequency‐selective impedance loading of transmission lines for dual‐band couplers

This article proposes an analytical design methodology for dual‐band hybrid couplers and baluns structures for any arbitrary frequency ratio using a stub‐loaded transmission line. An analysis of changing the impedance behavior of the stub, is carried out for the two bands of operation, which along with a dispersive analysis, emphasizes certain conditions where the existing methodology is not applicable. In addition, an extra degree of freedom has been included to increase the solutions for a given frequency ratio, thus providing greater flexibility and feasibility of the proposed structure. The design methodology is experimentally validated with the design and fabrication of dual‐band branch‐line and rat‐race couplers for various commercial frequency bands. © 2011 Wiley Periodicals, Inc. Int J RF and Microwave CAE , 2011.