Mass transfer in polycrystalline ytterbium monosilicate under oxygen potential gradients at high temperatures

Mass transfer in polycrystalline Yb₂SiO₅ wafers with precise composition control was evaluated and analyzed by oxygen permeation experiments at high temperatures using an oxygen tracer. Oxygen permeation proceeded due to mutual grain boundary diffusion of oxide ions and Yb ions without synergistic effects such as acceleration or suppression. The oxygen shielding properties of Yb₂SiO₅ were compared with those of the other line compounds such as Yb₂Si₂O₇ and Al₂O₃ based on the determined mass transfer parameters. It was found that the more preferentially an oxide ion diffuses in the grain boundary compared to the interior of the grain, the greater the effect of suppressing the movement of the oxide ion by applying an oxygen potential gradient becomes.     

Systematic packaging design tools integrating functional and environmental consequences on product life cycle: Case studies on laundry detergent and milk

This study presents systematic packaging design tools integrating functional and environmental consequences on product life cycle. To design packaging for sustainability, the trade-offs between functional and environmental aspects of packaging throughout the product life cycle should be considered. However, it is difficult for packaging designers to understand the overall trade-offs because the extent of the design consequences on the entire life cycle of packaging and its contents is unclear. We developed two tools for packaging design: the Life Cycle Association Matrix (LCAM) and the Function Network Diagram (FND). The following three steps, based on literature reviews and interviews with industrial experts, were applied. Firstly, we listed the product functions and design variables related to the functions as the attributes allocated to the product life cycle. Secondly, the attributes were connected appropriately based on causal relationships. Lastly, we identified the factors to support decision making in the packaging design procedure. As a result, the LCAM depicts the design consequences on the life cycle, and the FND determines the stakeholders affected by the design consequences. Two case studies were demonstrated to analyze the trade-offs by using our tools. In the case studies, a liquid laundry detergent bottle and a milk carton were redesigned. The tools identified the design consequences and stakeholders affected by the redesign of the usability and protective function for the detergent and milk cases, respectively. The results showed the significance of understanding the design consequences on the product life cycle by integrating the functional and environmental aspects.     

Differential induction of metallothionein synthesis by interleukin-6 and tumor necrosis factor-alpha in rat tissues

Metallothionein (MT) synthesis induced by the inflammatory cytokines, interleukin-6 (IL-6) and tumor necrosis factor-alpha (TNF), was studied in vivo. Administration of recombinant human IL-6 or TNF to rats caused the acute phase responses including rapid decreases in plasma zinc (Zn), and increases in plasma copper (Cu) and ceruloplasmin. Hepatic concentration of MT-I, one of MT isoforms, began to increase within 3 h after the injection of IL-6 or TNF. In IL-6-treated rats, MT-I concentration in liver reached a maximum level at 12 h and decreased with a transient rebound, whereas, in TNF-treated rats, a high level of MT-I lasted for about 48 h. MT-II, the other MT isoform, was induced more than MT-I in liver by both cytokines. MT-I was also induced in lung and heart by TNF, but little by IL-6. The data suggest that IL-6 may be responsible for MT synthesis in liver, whereas TNF may be responsible not only in liver but also in lung and heart. Furthermore plasma concentration of MT did not always reflect the enhanced concentration of MT by TNF and IL-6 in liver, suggesting involvement of many factors influencing plasma MT levels. The interrelation between IL-6 and TNF for MT synthesis has also been discussed.     

A new lateral MOS-gated thyristor with controlling base-current

A new lateral MOS-gated thyristor, called the Base-Current-Controlled Thyristor, is described. This device is designed so that most holes at the on-stage reach the P base through the floating P⁺ region adjacent to the P base and the on-state MOSFET. At the turn-off stage, the interruption of the hole current to the P base due to switching off the above MOSFET occurs simultaneously with the conventional turn-off operation. The concept of this device is verified experimentally by using the fabricated lateral device with the external MOSFET. This device exhibits a better trade-off relation between the on-state voltage and the turn-off time compared uith the conventional MOS-gated thyristor     

Generation of gas bubbles in microflow using micropipette with ultrasound

Ultrasound was applied to a micropipette micromixer to improve dispersion of gas and liquid in a microchannel. Flow visualization using a high-speed camera was performed to examine the effect of ultrasonic irradiation on bubble generation in the microchannel. Basically, nitrogen gas was injected using a (0.5 µm ID) glass micropipette into ethanol flowing in a rectangular (100 µm×200 µm) microchannel on polydimethylsiloxane (PDMS). Gas and liquid flow rates were regulated using mass flow controllers. At aflow condition that is typical of bubbly flow, ultrasound was transmitted into the microchannel using a piezo-electric (PZT) transducer over a range of operating voltages (2 to 200 Vp-p) and frequencies (50 to 60 kHz). Images captured during the action of the PZT transducer indicate that bubble formation is influenced by ultrasound. When subjected to ultrasound above 50 Vp-p and at the resonant frequency of the PZT transducer, bubbles formed that were smaller and closer together, signifying enhanced shearing of the gas at the micropipette tip by the liquid. The observation of gas slugs occurring sooner might be attributed to the coalescence of gas bubbles that became closely spaced.     

InxGa1−xAs ohmic contacts to n-type GaAs with a tungsten nitride barrier

Significant reduction of the contact resistance of In_0.7Ga_0.3As/Ni/W contacts (which were previously developed by sputtering in our laboratory) was achieved by depositing a W₂N barrier layer between the Ni layer and W layer. The In_0.7Ga_0.3 As/Ni/W₂N/W contact prepared by the radio-frequency sputtering technique showed the lowest contact resistance of 0.2 Ωmm after annealing at 550°C for 10 s. This contact also provided a smooth surface, good reproducibility, and excellent thermal stability at 400°C. The polycrystalline W₂N layer was found to suppress the In diffusion to the contact surface, leading to improvement of the surface morphology and an increase in the total area of the In_xGa−As between metal and the GaAs substrate. These improvements are believed to reduce the contact resistance.     

A transceiver PIC for bidirectional optical communication fabricated by bandgap energy controlled selective MOVPE

A transceiver PIC consisting of a DFB-LD, a receiver PD and a Y-shaped branch waveguides is realized by in-plane bandgap energy controlled selective MOVPE. Both active and passive core layers are formed in one step selective growth, and complicated fabrication procedure is no longer required. More than 1 mW fiber coupled power and 7 GHz receiver bandwidth are obtained. The modulation and detection operations at 500 Mb/s are successfully demonstrated.     

Distinct promoter sequences of two precursor genes for salmon gonadotropin-releasing hormone in masu salmon

Three phase partitioning (TPP) uses t-butanol and ammonium sulfate to precipitate enzymes and proteins from aqueous solutions. The method is useful both upstream with crude samples and downstream where a scaleable simple step is needed. About 25 enzymes and proteins have been isolated by various laboratories using TPP-t-butanol. The relation of t-butanol used in TPP, with n-butanol used as an extraction agent from Morton's work, is reviewed. Some t-butanol appears bound to TPP-precipitated proteins which are actually protein-t-butanol coprecipitates. They float above denser aqueous salts because bound t-butanol increases their buoyancy, similar to the behavior of many lipoproteins. On redissolving TPP-precipitated enzymes, total and specific activities usually are regained and sometimes increased. Sulfate ion-in large concentrations-likely exerts itself through its kosmotropic action as in conventional salting out. t-Butanol likewise appears to be a kosmotrope and crowding agent at room temperature or above, whereas C1 and C2 cosolvents (e.g., ethanol) do not so behave except at near or below zero temperatures. However, kosmotropy is not the entire origin of TPP, nor probably of conventional salting out. Electrostatic forces, capacity to force protein conformation tightening and protein hydration shifts, also contribute. Electrostatic forces, and the tendency for salt ions to bind and tighten protein molecule conformation, are indicated by the sharp pH dependency of both conventional salting out and TPP, around pH regions where proteins undergo conformation changes. Sulfate anion is densely-perhaps extraordinarily-hydrated, adding much to its effective size, and therefore it has a tendency to crowd or exclude proteins, when sulfate concentrations are in the 0.5 to 3 M range.