New catalytic functions of Pd–Zn, Pd–Ga, Pd–In, Pt–Zn, Pt–Ga and Pt–In alloys in the conversions of methanol

Pd and Pt supported on ZnO, Ga₂O₃ and In₂O₃ exhibit high catalytic performance for the steam reforming of methanol, CH₃OH+H₂OCO₂+3HH₂, and the dehydrogenation of methanol to HCOOCH₃, 2CH₃OHHCOOCH₃+2HH₂. Combined results with temperature-programmed reduction (TPR) and XRD method revealed that Pd–Zn, Pd–Ga, Pd–In, Pt–Zn, Pt–Ga and Pt–In alloys were produced upon reduction. Over the catalysts having the alloy phase, the reactions proceeded selectively, whereas the catalysts having metallic phase exhibited poor selectivities.     

Design methodology of piezoelectric energy-harvesting skin using topology optimization

This paper describes a design methodology for piezoelectric energy harvesters that thinly encapsulate the mechanical devices and exploit resonances from higher-order vibrational modes. The direction of polarization determines the sign of the piezoelectric tensor to avoid cancellations of electric fields from opposite polarizations in the same circuit. The resultant modified equations of state are solved by finite element method (FEM). Combining this method with the solid isotropic material with penalization (SIMP) method for piezoelectric material, we have developed an optimization methodology that optimizes the piezoelectric material layout and polarization direction. Updating the density function of the SIMP method is performed based on sensitivity analysis, the sequential linear programming on the early stage of the optimization, and the phase field method on the latter stage of the optimization to obtain clear optimal shapes without intermediate density. Numerical examples are provided that illustrate the validity and utility of the proposed method.     

Highly anisotropic thermal conductivity of mesogenic epoxy resin film through orientation control

To develop insulating materials with a high thermally conductive anisotropy, planarly aligned mesogenic epoxy (ME) resin film was fabricated by uniaxial coating on a hydrophobic polyethylene terephthalate substrate. Grazing incidence small-angle X-ray scattering (GISAXS) and transmission SAXS measurements exhibited that the films spontaneously formed uniaxially aligned monodomain-like smectic structures by curing on the hydrophobic substrate. Then, an in- and out-of-plane thermal conductivity of 10 and 0.048 W m⁻¹ K⁻¹ and outstanding thermal conductivity anisotropy of 208 have been confirmed, respectively. The ME resin films with high thermal conductivity can be applied as insulating materials for multiple-layer electrical and electronic devices.     

Design methodology of magnetic fields and structures for magneto-mechanical resonator based on topology optimization

Magneto-mechanical resonators—magnetically-driven vibration devices—are used in many mechanical and electrical devices. We develop topology optimization (TO) to configure the magnetic fields of such resonators to enable large vibrations under specified current input to be attained. A dynamic magneto-mechanical analysis in the frequency domain is considered where we introduce the surface magnetic force calculated from the Maxwell stress tensor. The optimization problem is then formulated involving specifically the maximization of the dynamic compliance. This formulation is implemented using the solid-isotropic-material-with-penalization method for TO by taking into account the relative permeability, Young’s modulus, and the mass density of the magnetic material as functions of the density function. Through the 2D numerical studies, we confirm that this TO method works well in designing magnetic field patterns and providing matching between the external current frequency and eigenfrequency of the vibrating structure.     

Colorless polyimides derived from 1S,2S,4R,5R-cyclohexanetetracarboxylic dianhydride,self-orientation behavior during solution casting,and their optoelectronic applications

A novel cycloaliphatic monomer for polyimides (PI), 1S,2S,4R,5R-cyclohexanetetracarboxylic dianhydride (H′-PMDA) is proposed in this work. H′-PMDA shows high polymerizability with various diamines in contrast to its isomer, i.e., conventional hydrogenated pyromellitic dianhydride (H-PMDA) and leads to highly flexible and colorless PI films with very high T_g's. In particular, the combinations with rigid structures of diamines give rise to PIs with significantly decreased coefficients of thermal expansion (CTE) owing to high extents of in-plane chain orientation induced by thermal imidization, whereas the H-PMDA-based counterparts do not. The decreased CTE reflects structural rigidity/linearity of the H′-PMDA-based diimide units as supported by liquid crystallinity observed in the corresponding model compound. Solution casting of a chemically imidized PI derived from H′-PMDA and 2,2′-bis(trifluoromethyl)benzidine (TFMB) results in a lower CTE than that of the thermally imidized counterpart, suggesting the presence of a self-orientation phenomenon during solvent evaporation. The mechanism is proposed in this work. H′-PMDA/TFMB and its copolymer systems can be useful as plastic substrates in image display devices and/or novel coating-type optical compensation films.     

Growth and differentiation potentials in confluent state of culture of human skeletal muscle myoblasts

The transitional behaviors of myoblasts toward differentiation were investigated in the cultures at the low and high seeding densities (respectively, X₀ = 1.0 × 10³ and 2.0 × 10⁵ cells/cm²). In the culture at the low seeding density, an increase in confluence degree accompanied a decrease in growth potential (R_p), being R_p = 0.85 and 0.11 at t = 48 and 672 h, respectively. Myoblasts seeded at the high density resulted in the immediate cessation of growth with keeping the low range of R_p = 0.02–0.09 throughout the culture. The reduction of R_p led to the generation of three subpopulations of cells in proliferative, quiescent and differentiated states. Close cell contacts in the confluent state of high seeding culture induced cell quiescence to a higher extent with suppressing differentiation.     

Methanol synthesis from CO2 over Cu/ZnO catalysts prepared from various coprecipitated precursors

Various precursors of Cu/ZnO catalysts were prepared by coprecipitation methods. By varying the conditions of coprecipitation, precursors having different structures (aurichalcite, malachite, hydrozincite, or their mixture) were obtained at given Cu/Zn ratios, ranging from 30/70 to 70/30. In a wide range of the Cu/Zn ratios, the catalysts derived from the precursors containing aurichalcite exhibited high performance in the methanol synthesis from CO₂.     

Chronic Beryllium disease after exposure to low-beryllium-content copper

A 24-year-old man was admitted to our hospital because of exertional dyspnea and abnormal shadows on chest X-ray film. He worked in a factory, where he was exposed to 1.8% beryllium-copper alloys. His job was to draw out heated beryllium-copper wire to make it more fine. Chest X-ray film and chest CT scan showed left-sided pneumothorax, diffuse fine reticulonodular shadows, and several cysts. Pulmonary-function tests showed a restrictive disorder and a low diffusing capacity. A specimen obtained by open-lung biopsy showed epithelioid cell granuloma and alveolitis, which were compatible with chronic beryllium disease. The beryllium content of the lung tissue was 0.045 microgram/gram. Beryllium lymphocyte transformation tests on blood and on bronchoalveolar lavage fluid were positive. Based on these findings, chronic beryllium disease was diagnosed. After treatment with 1 mg/kg of prednisolone daily, dyspnea disappeared. Then the dose was tapered slowly. In Japan, chronic beryllium disease is extremely rare, and to our knowledge only 22 other cases have been reported.     

An assay method for nitric oxide-related compounds in whole blood

The tibialis anterior muscle and soleus muscle of apolipoprotein-E-deficient mice were examined by light and electron microscopy. By light microscopy, sarcoplasmic inclusions were seen in tibialis anterior muscle and 40% of type 2 myofibers were affected in all animals over 8 months of age. These inclusions reacted for nonspecific esterase, cytochrome oxidase, and myoadenylate deaminase and were also periodic acid Schiff positive and stained basophilic with hematoxylin. Moreover, they reacted immunocytochemically with an antibody specific to fragment 17 to 24 of the published sequence of Alzheimer's cerebrovascular amyloid peptide. Immunoreactivity was lost when the antibody was adsorbed with the appropriate synthetic peptide. Ultrastructurally, the inclusions consisted of tubular arrays and were similar to those observed in human muscle in several pathological conditions. In type 1 myofibers of both tibialis anterior and soleus muscle, however, mitochondrial abnormalities including an increase in their number and size were detected, but tubular aggregates were not seen. These large mitochondria possessed an electron-dense inner chamber with an increased number of tightly packed cristae. The results obtained suggest that in these mice there is a disturbed lipid metabolism in skeletal muscle fibers that manifests itself with an accumulation of phospholipid in the form of sarcoplasmic reticulum tubules in the type 2 fibers and enlarged mitochondria with tightly packed cristae in the type 1 fibers. In addition, beta-amyloid protein was closely associated with the accumulated tubules and vesicles of sarcoplasmic reticulum and may represent dysregulation of amyloid precursor protein metabolism.     

Prostate specific antigen doubling time in prostate cancer before treatment and in refractory status]

Prostate-specific antigen(PSA) increases exponentially in prostate cancer patients before treatment and in refractory status. PSA increases in 68-86% of prostate cancer patients before treatment, and that of the remaining 14-32% of the patients is stable. Those patients with a higher pre-treatment PSA level are more likely to have a shorter PSA-doubling time(PSA-DT). The relationship between pre-treatment stage, grade and PSA-DT is controversial. PSA-DT in biochemical failure patients predicts the risk of clinical recurrence. PSA-DT was correlated well with time to clinical recurrence after biochemical failure. Distant recurrence was associated with short PSA-DT. Higher clinical stage and lower differentiation before treatment correlated with shorter PSA-DT in recurrent cancer patients. PSA-DT is an important parameter for judging malignant potential of each cancer.