Synthesis of Thermally Stable χ-Alumina by Thermal Decomposition of Aluminum Isopropoxide in Toluene

Thermal decomposition of aluminum isopropoxide in toluene at 315°C resulted in χ-alumina that had high thermal stability, whereas the reaction at lower temperatures resulted in formation of an amorphous product. The χ-alumina thus obtained directly transformed to α-alumina at ∼1150°C, bypassing the other transition alumina phases, whereas the amorphous product transformed to γ-alumina and then to θ-alumina before final transformation to α-alumina. When the χ-alumina, solvothermally synthesized at 315°C, was recovered by the removal of the solvent at the reaction temperature, thermal stability of the product was improved further. This procedure is convenient because it avoids bothersome work-up processes that yield large-surface-area and large-pore-volume alumina.     

Ag-ZnO catalysts for UV-photodegradation of methylene blue

High surface area Ag-ZnO catalysts have been made by flame spray pyrolysis (FSP) and characterized by X-ray diffraction (XRD), nitrogen adsorption, UV–vis spectroscopy and electron microscopy (SEM and transmission electron microscopy (TEM)) combined with energy dispersive X-ray spectroscopy (EDXS) for elemental mapping. Silver metal clusters deposited directly on ZnO nanocrystals were obtained from this process. The Ag loading (1–5 at.%) controlled the Ag cluster size from 5 to 25 nm but did not influence the ZnO crystal size. Photodegradation of 10 ppm methylene blue (MB) solution was used to evaluate the performance of these FSP-made Ag-ZnO and was compared to wet-made Ag-ZnO and reference titania photocatalysts. The rate of photodegradation was optimal for Ag loading around 3 at.%. The best photocatalytic performance was exhibited by flame-made Ag-ZnO produced at the longest high-temperature residence times having high crystallinity as determined by XRD and UV–vis.     

Phase transformation behavior of nanocrystalline χ-alumina powder obtained by thermal decomposition of AIP in inert organic solvent

Thermal decomposition of aluminum isopropoxide (AIP) in inert organic solvents (toluene and mineral oil) resulted in the formation of -alumina. Phase evolution by calcination at various temperatures for this alumina was studied via X-ray diffraction. The results suggest a direct transformation from -alumina to -alumina at approximately 1180°C, without the formation of -alumina phase, while still maintaining the small particle size (<100 nm). The transformation behavior was observed by TEM and the crytallite size was calculated by the Scherrer equation. The results indicate one -alumina crystal transforms into one -alumina crystal at its critical size in a nucleation step. This crystal exhibits a rapid grain growth following the transformation.     

Impact of quenching process on the surface defect of titanium dioxide for hydrogen production from photocatalytic decomposition of water

Nanocrystalline titania was prepared by solvothermal reaction of titanium butoxide in toluene at 300 °C for 2 h. Thus obtained-powder was calcined at 300 °C in box furnace for 1 h and then quenched in various media at different temperature. The physiochemical properties of samples were investigated by using X-ray diffraction (XRD), nitrogen adsorption, CO₂-Temperature Programmed Desorption (CO₂-TPD), UV–visible scanning spectrophotometer, Transmission electron microscopy (TEM) and electron spin resonance spectroscopy (ESR) techniques. All physical properties such as phase, BET surface area and crystal size were not changed after quenching processes. While the CO₂-TPD and ESR results indicate the changing of Ti³⁺ contents on the surface of TiO₂ after quenching process. The amounts of Ti³⁺ increased as the quenching temperature decreased. Photocatalytic decomposition of water was carried out to evaluate the catalytic activity of quenched TiO₂. The activity of quenched-powder increased corresponding to the increasing of Ti³⁺ contents increased by following order: air at 77 K > air at RT > air at 373 K > 30 wt% H₂O₂ at RT = 30 wt% H₂O₂ at 373 K > H₂O at RT > H₂O at 373 K.     

Effect of Ni-modified α-Al2O3 prepared by sol–gel and solvothermal methods on the characteristics and catalytic properties of Pd/α-Al2O3 catalysts

In the present study, Ni-modified α-Al₂O₃ with Ni/Al ratios of 0.3 and 0.5 were prepared by sol–gel and solvothermal method and then were impregnated with 0.3 wt.% Pd. Due to different crystallization mechanism of the two preparation methods used, addition of nickel during preparation of α-Al₂O₃ resulted in various species such as NiAl₂O₄, mixed phases between NiAl₂O₄ and α-Al₂O₃, and mixed phases between NiAl₂O₄ and NiO. As revealed by NH₃-temperature programmed desorption, formation of NiAl₂O₄ drastically reduced acidity of alumina, hence lower amounts of coke deposited during acetylene hydrogenation was found for the Ni-modified α-Al₂O₃ supported catalysts. For any given method, ethylene selectivity was improved in the order of Pd/Ni–Al₂O₃-0.5 > Pd/Ni–Al₂O₃-0.3 > Pd/Ni–Al₂O₃-0  Pd/α–Al₂O₃-commercial. When comparing the samples prepared by different techniques, the sol–gel-made samples showed better performances than the solvothermal-derived ones.     

Preparation of ZnO nanorod by solvothermal reaction of zinc acetate in various alcohols

Solvothermal reaction of zinc acetate in various alcohols resulted in the formation of zinc oxide (ZnO) nanorods. The effects of reaction conditions on the product morphology as well as crystallization mechanism were investigated by using X-ray diffraction (XRD), infrared spectroscopy (IR), scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS) and transmission electron microscopy (TEM) techniques. It was found that average diameter and length of the nanorods increased with an increase in reaction temperature or the initial concentration of zinc acetate. On the contrary, the aspect ratio of the product depended upon type of alcohol used as the reaction medium. The aspect ratio of ZnO nanorods increased from 1.7 to 5.6 when the alcohol was changed from 1-butanol to 1-decanol. An investigation of the reaction mechanism suggested that the formation of ZnO nanorods was initiated from the esterification reaction between zinc acetate precursor and alcohol to form ZnO seeds.     

Effect of Support Crystallite Size on Catalytic Activity and Deactivation of Nanocrystalline ZnAl2O4-Supported Pd Catalysts in Liquid-Phase Hydrogenation

The catalytic activity and deactivation of nanocrystalline ZnAl₂O₄-supported Pd catalysts were investigated for the liquid-phase hydrogenation under mild conditions. Nanocrystalline ZnAl₂O₄ spinels with average crystallite size between 8 and 33 nm were synthesized by the solvothermal method in toluene. Higher turnover frequencies for 1-heptyne hydrogenation and less deactivation due to Pd leaching were obtained for the Pd/ZnAl₂O₄-33 nm catalyst. XPS and ESR results suggest that the presence of defects in larger crystallite size ZnAl₂O₄ resulted in higher Pd dispersion and stronger interaction between Pd and the support.     

Characteristics and Catalytic Properties of Mesocellular Foam Silica Supported Pd Nanoparticles in the Liquid-Phase Selective Hydrogenation of Phenylacetylene

Abstract  

An ultra-large pore mesocellular foam silica (MCF) was employed as a support for preparation of supported Pd catalysts for the liquid-phase selective hydrogenation of phenylacetylene. The catalysts were prepared by three different routes: (i) incipient wetness impregnation using Pd(II)acetate solution (Pd/MCF-imp), (ii) impregnation of colloidal Pd nanoparticles obtained by the solvent reduction method (Pd/MCF-col), and (iii) in situ synthesis of MCF in the presence of the Pd colloid (Pd/MCF-ss). The conventional impregnation method resulted in more agglomeration of Pd particles and partial collapse of MCF structure, hence the Pd/MCF-imp exhibited the lowest selectivity towards styrene at total conversion of phenylacetylene. Only the Pd/MCF-ss, in which most of the Pd nanoparticles were encapsulated by the silica matrix, was found to retain high styrene selectivity (>80%) after complete conversion of phenylacetylene. Comparing to the other highly efficient Pd catalysts reported in the literature under similar reaction conditions, it can be emphasized that coverage of Pd surface by the support produces great beneficial effect for enhancing styrene selectivity, regardless of the type of supports used (i.e., TiO₂, carbon nanotubes, or mesostructured silica).     

Naloxone facilitates extinction but does not affect acquisition or expression of ethanol-induced conditioned place preference.

Mice (DBA/2J) received a Pavlovian procedure in which a distinctive floor stimulus was paired 4 times with ethanol (2 g/kg). A different floor stimulus was paired with saline. Naloxone (0.0, 1.5, or 10.0 mg/kg, intraperitoneal) given before each ethanol trial did not interfere with acquisition of conditioned preference, although naloxone alone produced conditioned aversion. When naloxone (0.0, 0.15, 1.5, 3.0, or 10.0 mg/kg) was given for the first time during testing, mice showed conditioned preference during the first 10 min. However, preference subsequently decreased dose-dependently over time. Control studies eliminated alternative interpretations based on pharmacokinetics or presence of an aversive state. The overall pattern of results suggests that naloxone facilitated extinction of conditioned place preference and supports the hypothesis that ethanol-induced conditioned reinforcement is mediated by the endogenous opioid system. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Characteristics and Catalytic Properties of Pd/SiO2 Synthesized by One-step Flame Spray Pyrolysis in Liquid-phase Hydrogenation of 1-Heptyne

In this study, Pd/SiO₂ catalysts with 0.5–10 wt.% Pd loadings were prepared by one-step flame spray pyrolysis (FSP) and characterized by N₂ physisorption, X-ray diffraction (XRD), transmission electron microscopy (TEM), CO chemisorption, and X-ray photoelectron spectroscopy (XPS). The average cluster/particles size of Pd as revealed by TEM were ca. 0.5–3 nm. The turnover frequencies (TOFs) of the flame-made catalysts decreased from 66.2 to 4.3 per s as Pd loading increased from 0.5 to 10 wt.%, suggesting that the catalytic activity was dependent on Pd particle/cluster size. However, there were no appreciable influences on 1-heptene selectivity. The flame-made Pd/SiO₂ showed better properties than the conventional prepared catalysts. Their advantages are not only the presence of large pores that facilitates diffusion of the reactants and products, but also the high-catalytic activity of as-synthesized catalysts so that further pretreatment is not necessary.