Synthesis of sulfonated organic–inorganic hybrids through the radical copolymerization of vinyl sulfonate esters and vinyl trialkoxysilanes

Novel organic–inorganic hybrids with sulfonic acid groups were prepared using random copolymers composed of vinyl sulfonate esters and vinyl trialkoxysilanes. Five vinyl sulfonate esters with different substituent groups were employed as protecting monomers for the production of the poly(vinyl sulfonic acid) component, and three vinyl trialkoxysilanes were used as cross-linkable monomers. Free radical and reversible addition-fragmentation chain transfer (RAFT) copolymerizations were performed for the production of random copolymers with two different functional groups. The selective deprotection of the sulfonate esters of the copolymers proceeded smoothly and resulted in the formation of copolymers with lithium vinyl sulfonate units and cross-linkable trialkoxysilane units. The co-condensation of the trialkoxysilane moieties in the deprotected copolymers with cross-linkers yielded transparent hybrid films that contained lithium sulfonate groups without aromatic rings or ester linkages.     

Low dissipation current GaAs prescaler IC

A 1 GHz variable modulus freqency divider with very low dissipation current has been developed. Using a high-transconductance (200?250 mS/mm) FET by Pt burying technology and series gating source-coupled FET logic, the dissipation current of the fabricated IC was reduced to 3.2 mA at 1 GHz operation.     

PIV measurement and turbulence scale in turbulent combustion

We have investigated turbulent combustion by PIV (Particle Image Velocimetry) technique. Comparing with LDV data, the validity of PIV measurements has been confirmed. Particularly, the conditions of sampling number and spatial resolution have been shown to yield reliable data using PIV. Based on the velocity fields in cold flow and combustion, the interaction between flame and flow has been discussed. It was observed that the flow field is changed by combustion and the turbulence is reduced. In order to determine statistical quantities such as mean velocity and RMS of velocity fluctuation, a sampling number of 1000 is needed. Moreover, the velocity correlation coefficient was evaluated to obtain the integral length scale of the flow. For both cold flow and combustion, the PIV estimated scale is very close to that of LDV based on the assumption of Taylor's hypothesis. As a result, the spatial resolution in this study is about 6 times smaller than the integral length scale. © 2006 Wiley Periodicals, Inc. Heat Trans Asian Res, 35(7): 501–512, 2006; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/htj.20129     

Preparation and properties of CuInS2 thin film prepared from electroplated precursor

Thin CuInS₂ films were prepared by sulfurization of Cu/In bi-layers. First, the precursor layer was electroplated onto the treated surface of Mo-coated glass. Observation of the cross-section prepared by focused ion beam (FIB) etching revealed that the void-free film was initially formed on the top surface of the precursor layer and continued to grow until the advancing front of the film reached the Mo layer. The nucleation of voids near the bottom of the CuInS₂ film followed. To determine whether the condition of the Cu/In alloy influences the CuInS₂ quality we investigated the Cu/In alloy state using FIB. We found that the annealed precursor of low Cu/In ratio (1.2) has several voids in the mid position in the layer compared with Cu-rich precursor (1.6). The cross-sectional view of the Cu-rich absorber layer is uniform compared with the low copper absorber layer. Thin film solar cells were fabricated using the CuInS₂ film (Cu/In ratio: 1.2) as an optical absorber layer. It was found that the optimization of a sulfurization period is important in order to improve the cell efficiency. We have not yet obtained good results with high Cu-rich absorber because of a blister problem. This blister was found before sulfurization. So, we are going to solve this blister problem before sulfurization.     

Different change in lipoprotein(a) levels from lipid levels of other lipoproteins with improved glycemic control in patients with NIDDM

OBJECTIVE: To evaluate change both in lipoprotein(a) [Lp(a)] and lipid levels in other lipoproteins in non-insulin-dependent diabetes mellitus (NIDDM) after short-term improvement of glycemic control. RESEARCH DESIGN AND METHODS: We compared Lp(a) levels in 210 NIDDM patients with those in 46 control subjects and evaluated the relationship between glycemic control and Lp(a) levels in diabetic patients. In addition, changes in Lp(a) levels and lipid levels were assessed after the improvement of glycemic control in 54 poorly controlled NIDDM patients. RESULTS: In NIDDM, Lp(a) levels in all patients, 62 patients with HbA1c < 6.0%, and 75 patients with HbA1c between 6.0 and 8.0%, were significantly higher than those in control subjects (19.1 [1.7-106.6], 19.2 [6.0-106.6], and 20.3 [2.7-75.3] vs. 15.4 [2.0-61.7] mg/dl, median [range], P < 0.05). Lp(a) levels in 73 patients with HbA1c of > or = 8.0% (18.7 [1.7-58.8] mg/dl) were not significantly different from those in control subjects. After glycemic control, lipid levels in plasma and in other lipoproteins fell significantly, but Lp(a) did not change (from 18.3 [1.7-58.8] to 18.4 [6.6-95.3] mg/dl). Changes in lipid levels, including Lp(a), did not correlate with those in fasting plasma glucose or HbA1c. CONCLUSIONS: These results suggest that elevated Lp(a) levels do not reflect poor glycemic control and that Lp(a) levels are independent of lipid levels in other lipoproteins after improved glycemic control in NIDDM.     

An elevation of stem cell factor in patients with hyperthyroid Graves'' disease

The dose of cells expressing the surface antigen CD34 (CD34+) has been shown to be a reliable predictor of the time to engraftment following transplantation of PBPC to support high-dose chemotherapy. However, evaluation of rare cells is complicated by a number of factors, including the variability in operator and technical procedures. Recently, Becton Dickinson Immunocytometry Systems introduced a new CD34+ cell analysis system, the ProCOUNT cell enumeration kit, which automates the analysis of CD34+ cells and minimizes the variabilities of this procedure. We have evaluated the ProCOUNT system in comparison to a standard CD34 cell analysis (based on the Milan approach) using leukapheresis products from patients and normal donors mobilized with chemotherapy plus recombinant human G-CSF (rhG-CSF) or with rhG-CSF alone. In addition, we compared these analyses using CD34+ cell-selected mobilized leukapheresis products with purities of 75% or greater. The standard CD34 cell analysis methodology quantitated the frequency of cells identified as CD45+, low side scatter, and CD34+. A high correlation coefficient was obtained between the ProCOUNT methodology and the standard CD34 cell analysis methodology for cells obtained from leukapheresis products mobilized with chemotherapy plus rhG-CSF (r = 0.98), rhG-CSF alone (r = 0.96), and CD34+-selected mobilized leukapheresis products (r = 0.83). A comparison was also made between technicians using both analysis methods. Whereas the correlation coefficient between two technicians using the standard methodology was r = 0.77, the correlation coefficient was much higher when using ProCOUNT (r = 0.99). These data demonstrate that the use of ProCOUNT is associated with less variability between data analyzed by different operators. Also, ProCOUNT is consistent with existing CD34+ cellular analysis methodologies. An additional advantage is the ability to determine the absolute concentration of CD34+ cells, thereby allowing calculation of total CD34+ cell numbers without using WBC counts, which also have inherent errors. The ProCOUNT system provides an automated analysis procedure that minimizes the variables in CD34+ cell analysis and may be useful for standardization of methodology between laboratories.     

Repeated temperature modulation epitaxy for p-type doping and light-emitting diode based on ZnO.

Since the successful demonstration of a blue light-emitting diode (LED), potential materials for making short-wavelength LEDs and diode lasers have been attracting increasing interest as the demands for display, illumination and information storage grow. Zinc oxide has substantial advantages including large exciton binding energy, as demonstrated by efficient excitonic lasing on optical excitation. Several groups have postulated the use of p-type ZnO doped with nitrogen, arsenic or phosphorus, and even p-n junctions. However, the choice of dopant and growth technique remains controversial and the reliability of p-type ZnO is still under debate. If ZnO is ever to produce long-lasting and robust devices, the quality of epitaxial layers has to be improved as has been the protocol in other compound semiconductors. Here we report high-quality undoped films with electron mobility exceeding that in the bulk. We have used a new technique to fabricate p-type ZnO reproducibly. Violet electroluminescence from homostructural p-i-n junctions is demonstrated at room-temperature.     

Evaluation of the FREEDOM O2, DC Concentrator, a portable oxygen concentrator capable of operating under car battery power

Many sensitive biomarkers are available for the surveillance of the early health effects of chemicals on humans. This study was conducted to evaluate the usefulness of glycosaminoglycans (GAG) as biomarkers of early kidney effects in exposure to 2-alkoxyethanols and their acetates. GAG were compared with effects on the urinary beta-N-acetylglycosaminidase activity (NAG). According to the results of the present study, the excretion rate of GAG was higher among women than men. On the other hand, the excretion rate of GAG was lower among exposed subjects than among the controls, and the level was decreased at the tested levels of exposure. The NAG activity was higher in most of the exposed groups than in the controls. The data indicated that an appropriate urinary limit value for ethoxyacetic acid was 30 mmol/mol creatinine in postshift samples and that this value corresponded to an 8-hour exposure level of 2 cm3/m3 2-ethoxyethylacetate. Urinary butoxyacetic acid excretion of 60 mmol/mol creatinine corresponded to the inhalation exposure level of 5 cm3/m3 2-butoxyethanol and its acetate in postshift samples.     

Key features in the development of unimorph stainless steel cantilever with screen-printed PZT dedicated to energy harvesting applications

The design and processing of vibrational energy harvester based on screen-printed piezoelectric lead zirconate titanate (Pb(ZrxTi1-x)O3 (PZT)) are described here. Two different structures, a simple cantilever and a complex zig-zag geometry made of PZT layer sandwiched between gold electrodes and supported on a metallic stainless steel substrate have been successfully fabricated by screen printing thick film technique. Compared to bulk PZT ceramics, the main limiting features at different scales are porosity, interfaces, and bending issues. The microstructural analysis of the interfaces in the cantilever has highlighted the formation of an interface between the substrate and the bottom electrode which ensures cohesion of the structure but can limit its dynamic. Bending has shown to be dependent on the thickness of the active piezoelectric layer. Dielectric and electromechanical characterizations performed on multilayers, bulk ceramics, and free-standing screen-printed disks are compared and discussed on the basis of interface issues.