Novel pearl millet couscous process for West African markets using a low-cost single-screw extruder

Traditional West African pearl millet couscous products are popular; however, their preparation is laborious, time-consuming and energy-demanding, involving agglomeration, steaming, drying and sieving steps. In this study, a process was developed to produce millet couscous using a high pressure, high temperature and low-cost single-screw extruder. The innovation was to directly process the cooked low-moisture extrudate to a couscous product by drying and milling to the appropriate particle size (ranging between 1 and 2 mm). Throughput for the traditional process as prepared for commercial sale is 50 kg per day, but with the same amount of labour, the extrusion process yields ~350 kg per day. A consumer sensory study held in Niamey (Niger) showed that the extruded millet couscous was comparable to traditional couscous, though this was dependent on selection of the proper millet variety. This novel extrusion process could stimulate small- to medium-scale manufacturing of couscous and couscous-type products in West Africa.     

Methyl Oct-cis-2-enoate. its synthesis,GLC behaviour and infrared spectra

Methyl oct-cis-2-enoate was synthesized by selective hydrogenation of methyl oct-2-ynoate at atmospheric pressure with quinoline poisoned palladium as catalyst. The resulting product contained only 7% of thetrans form, as determined by GLC. The structure was confirmed by infrared spectra. Analysis of the infrared spectra is given. The cis andtrans forms of methyl oct-2-enoate were separable by GLC in polar or non-polar columns. GLC runs in polar and non-polar phases showed that the α position of the double bond of methyl oct-2-enoate so affects its properties, that practically no interaction was observed between the double bond and the polar phase. Consequently volatility was the main factor determining the retention times of cis andtrans methyl oct-2-enoate in the polar and non-polar phases studied.     

Degradation of the oxirane ring of epoxidized vegetable oils with solvated acetic acid using cation‐exchange resins

Vegetable oil epoxides (oxiranes) are customarily manufactured using acetic acid (AA) as oxygen carrier and reactant source, in aqueous/organic media. Further attack of the oxirane ring by AA proceeds in this acid‐catalyzed process, lowering yield. We report a study of the degradation of the ring by water‐solvated AA, using Amberlite IR‐120 as heterogeneous catalyst. The ring opening with solvated AA was found to be first order with respect to the concentration of epoxide groups and second order with respect to the carboxylic acid, with an activation energy of 58.7 ± 0.42 kJ mol^?1. This value is within the range found in liquid‐liquid systems (51.3–66.3 kJ mol^?1). Yet, using IR‐120, the degradation increases identically either by adding more mass of catalyst or by reducing its particle diameter while keeping the total mass constant, as both situations lead to higher external (exposed) area of the acidic catalyst (i.e., free protons associated to the sulfonic group) on the outer surface of the ion exchange resin beads. These free protons, in turn, become available to catalyze the attack on the oxirane groups of the long‐chain fatty acids, which cannot enter (diffuse) into the gel phase of the resin. Despite the unavoidable presence of surface‐exposed protons, the degradation can be reduced by several orders of magnitude – for similar process conditions – by using this type of heterogeneous catalysts instead of mineral acids.     

Poly-bagging predictors for classification modelling for credit scoring

Credit scoring modelling comprises one of the leading formal tools for supporting the granting of credit. Its core objective consists of the generation of a score by means of which potential clients can be listed in the order of the probability of default. A critical factor is whether a credit scoring model is accurate enough in order to provide correct classification of the client as a good or bad payer. In this context the concept of bootstraping aggregating (bagging) arises. The basic idea is to generate multiple classifiers by obtaining the predicted values from the fitted models to several replicated datasets and then combining them into a single predictive classification in order to improve the classification accuracy. In this paper we propose a new bagging-type variant procedure, which we call poly-bagging, consisting of combining predictors over a succession of resamplings. The study is derived by credit scoring modelling. The proposed poly-bagging procedure was applied to some different artificial datasets and to a real granting of credit dataset up to three successions of resamplings. We observed better classification accuracy for the two-bagged and the three-bagged models for all considered setups. These results lead to a strong indication that the poly-bagging approach may promote improvement on the modelling performance measures, while keeping a flexible and straightforward bagging-type structure easy to implement.     

Lock-in amplifier error prediction and correction in frequency sweep measurements

This article proposes an analytical algorithm for predicting errors in lock-in amplifiers (LIAs) working with time-varying reference frequency. Furthermore, a simple method for correcting such errors is presented. The reference frequency can be swept in order to measure the frequency response of a system within a given spectrum. The continuous variation of the reference frequency produces a measurement error that depends on three factors: the sweep speed, the LIA low-pass filters, and the frequency response of the measured system. The proposed error prediction algorithm is based on the final value theorem of the Laplace transform. The correction method uses a double-sweep measurement. A mathematical analysis is presented and validated with computational simulations and experimental measurements.     

AZ31 magnesium alloy recycling through friction stir extrusion process

Friction Stir Extrusion is a novel technique for direct recycling of metal scrap. In the process, a dedicated tool produces both the heat and the pressure to compact and extrude the original raw material, i.e., machining chip, as a consolidated component. A proper fixture was used to carry out an experimental campaign on Friction Stir Extrusion of AZ31 magnesium alloy. Variable tool rotation and extrusion ratio were considered. Appearance of defects and fractures was related to either too high or too low power input. The extruded rods were investigated both from the metallurgical and mechanical points of view. Tensile strength up to 80 % of the parent material was found for the best combination of process parameters. A peculiar 3D helical material flow was highlighted through metallurgical observation of the specimens.     

Are HFC buses a feasible alternative for urban transportation in Paraguay?

Paraguay is very rich in hydropower and a net importer of fossil fuels. Besides, in Paraguay, the transportation sector counts for a big share of the total energy demand. So if this sector would be changed to clean fuel, imported oil dependence and air pollution will be reduced dramatically. This paper assesses the feasibility of HFC urban buses implementation in the transportation sector in Paraguay. In general, annual transportation cost for a fleet of 55 HFC urban buses is estimated in US$ 33,682,581 compared with US$ 40,612,741.84 for diesel urban buses, which indicates that this technology could be an economical and environmentally clean alternative to substitute diesel urban buses in the Paraguayan transportation sector. These results are strongly linked to the chosen boundary conditions, such as electricity price and availability, the electrolytic hydrogen demand and the basic electrolyser's management.     

Deposition of Pt nanoparticles on different carbonaceous materials by using different preparation methods for PEMFC electrocatalysts

The objective of this study is to evaluate different methods to obtain Pt (20 wt%)/carbon electrocatalysts, in order to identify the conditions that lead to electrocatalysts with the best electrochemical performance. This paper involves the study of different methods for the deposition and reduction of H₂PtCl₆ on three carbon supports: Vulcan carbon, Multiwall carbon nanotubes and mesoporous carbons. The deposition–reduction methods in liquid phase were carried out with HCOOH or NaBH₄ as reducing agents. Besides, the conventional impregnation was carried out by deposition of H₂PtCl₆ on carbon followed by a reduction with H₂ at high temperature. The electrochemical performance of supported Pt catalysts prepared by reduction in liquid phase is strongly dependent on the metallic dispersion, the particle size distribution and the nature of the carbonaceous material used as a support. Results show that the deposition–reduction method using HCOOH 0.3 M at 50–60 °C and a mesoporous carbon leads to the most efficient electrocatalyst.     

Palladium(II) extraction from concentrated chloride media: Reactions involving thioamide derivatives

This work focuses on the detailed study of the palladium(II) extraction reactions by N-methyl-N-phenyl-octanthioamide (MPHTA) and N-methyl-N-cyclohexyl-octanthioamide (MCHTA) in toluene, since their ability to efficiently and selectively recover Pd(II) from a wide range of HCl concentrations is already known. Equilibrium data are presented and discussed, and further complemented by information depicted from UV–visible and NMR spectra. The determined apparent molar volumes show that MPHTA is monomeric, and MCHTA exhibits a slight tendency to aggregate. The Pd(II) extraction reactions by MPHTA and MCHTA are equivalent until 4.5 M HCl, passing through the formation of inner-sphere complexes with the metal ion.