Barium titanate‐based nanodielectrics of two chemically recyclable thermosets

In this work was investigated the effect of the addition of barium titanate (BaTiO₃) on electrical properties of two chemically recyclable thermosets, polyhemiaminal (PHA) and polyhexahydro‐s‐triazine (PHT), both fabricated from 4,4′‐oxydianiline (ODA), an ether derivative of aniline and paraformaldehyde. Thermal and mechanical properties as well as chemical recyclability of the two polymers and their nanocomposites/nanodielectrics were also investigated. In addition, a quantitative analysis was conducted of the nanoparticle dispersion in the PHA‐/PHT‐based BaTiO₃‐containing nanocomposites using transmission electron microscopy imaging and the nearest‐neighbor distance index and this index was used to analyze the investigated properties in connection with the proper mechanisms. Regarding the electrical properties for both neat polymers, conductivity values of the order of 10^?8 S m^?1 at 100 Hz were observed and dielectric constant values close to 2.80 for both polymers at 1 kHz. The addition of 0.5 wt% of BaTiO₃ ferroelectric nanoparticles increased by about 44% the dielectric constant (1 kHz) and conductivity (10² Hz) of the PHA‐based nanocomposite. PHA and PHT exhibited glass transition temperature (T_g) values in the range 125–180 °C. An increase of 7 °C in T_g was observed after the incorporation of 0.5 wt% of BaTiO₃ into PHA. Concerning the mechanical properties, values in the range 4.00–4.45 GPa for reduced modulus and 0.30–0.43 GPa for nanohardness for PHA and PHT polymers were observed. Independently of filler content or polymer matrix, both mechanical properties were enhanced after the addition of BaTiO₃. The chemical recycling of PHA/PHT and all nanocomposites in the initial ODA reagent after sulfuric acid treatment was successfully characterized using the NMR and Fourier transform infrared spectroscopic techniques. © 2018 Society of Chemical Industry     

Bamboo biochar-catalytic degradation of lignin under microwave heating

Abstract

Lignin biochar-catalytic depolymerization using biochar Fe-600, Fe-800, Ni-600, Ni-800 catalysts under microwave-heating (180?°C for 30?min) was explored in an ethanol/formic acid (1:1) media. Non-catalyst depolymerization was also studied and compared with the biochar-catalysts results. Characteristics of the bio-char catalysts were analyze by BET, XRD, and FT-IR. GPC, FT-IR, and MALDI-TOF MS spectrometry were also used to characterize the depolymerization products. The experimental results showed that the S_BET, V_t, and V_mec and average pore diameter of the biochars are considerably dependent on the preparation temperature and type of cation (Ni²⁺ or Fe³⁺). The maximum yield of bio-oil product was obtained as 85?wt% with the addition of biochar Ni-600 and the total amount of oligomers or monomers with a molecular weight of 164 to 446 reaches 80.4%.     

1H T2‐NMR monitoring of crosslinked polyolefin aging

This work examines the correlation between the ¹H‐NMR T₂ relaxation constant and the mechanical properties of aged crosslinked polyolefin cable insulation. T₂ experiments on unswollen samples could not differentiate between unaged and highly aged materials; all exhibited ¹H T₂ constants of approximately 0.5 ms. To accentuate the effects of aging, samples were swollen in various solvents. Unaged samples had T₂ values of approximately 15 ms in good solvents. With thermal aging, T₂ values decreased as the ultimate tensile elongation decreased. However, the correlation between T₂ and elongation differed for samples irradiated with high‐energy radiation and for materials aged above versus below the crystalline melting temperature. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 2578–2582, 2003     

Cytotoxic effects of topotecan combined with various anticancer agents in human cancer cell lines

BACKGROUND: Topotecan (TPT) is a topoisomerase I poison that exhibits antineoplastic activity. Analysis of the cytotoxic effects of combinations of TPT and other anticancer agents has been limited. PURPOSE: We assessed the cytotoxic effects produced by combinations of TPT and other antineoplastic agents in experiments involving multiple human cancer cell lines of diverse histologic origins. METHODS: The cytotoxic effects of various antimetabolites (fluorouracil, methotrexate, or cytarabine), antimicrotubule agents (vincristine or paclitaxel [Taxol]), DNA alkylating agents (melphalan, bis[chloroethyl]nitrosourea [BCNU], or 4-hydroperoxycyclophosphamide [4HC]), and a DNA-platinating agent (cisplatin), alone and in combination with TPT, were measured in clonogenic (i.e., colony-forming) assays. HCT8 ileocecal adenocarcinoma, A549 non-small-cell lung carcinoma, NCI-H82ras(H) lung cancer, T98G glioblastoma, and MCF-7 breast cancer cell lines were used in these assays. The data were analyzed by the median effect method, primarily under the assumption that drug mechanisms of action were mutually nonexclusive (i.e., completely independent of one another). For each level of cytotoxicity (ranging from 5% to 95%), a drug combination index (CI) was calculated. A CI less than 1 indicated synergy (i.e., the effect of the combination was greater than that expected from the additive effects of the component agents), a CI equal to 1 indicated additivity, and a CI greater than 1 indicated antagonism (the effect of the combination was less than that expected from the additive effects of the component agents). RESULTS: When the mechanisms of drug action were assumed to be mutually nonexclusive, virtually all CIs for combinations of TPT and either antimetabolites or antimicrotubule agents revealed cytotoxic effects that were less than additive. The CIs calculated at low-to-intermediate levels of cytotoxicity for combinations of TPT and the DNA alkylating agents melphalan, BCNU, and 4HC also showed drug effects that were less than additive; in most cases, however, nearly additive or even synergistic effects were observed with these same drug combinations at high levels of cytotoxicity (i.e., at > or = 90% inhibition of colony formation). Results obtained with combinations of TPT and cisplatin varied according to the cell line examined. With A549 cells, less than additive effects were seen at low-to-intermediate levels of cytotoxicity, and more than additive effects were seen at high levels of cytotoxicity. With NCI-H82ras(H) cells, synergy was observed over most of the cytotoxicity range. CONCLUSIONS AND IMPLICATIONS: TPT cytotoxicity appears to be enhanced more by combination with certain DNA-damaging agents than by combination with antimetabolites or antimicrotubule agents. Interactions between TPT and other drugs can vary depending on the cell type examined. Further investigation is required to determine the basis of the observed effects and to determine whether these in vitro findings are predictive of results obtained in vivo.     

Men, medicine and machines

PURPOSE: To examine the management and possible causes of primary valve malfunction of the Krupin eye valve with disk. METHODS: The authors reviewed the results of 113 patients undergoing implantation of the Krupin eye valve with disk and identified eight patients with primary valve malfunction requiring surgical revision. RESULTS: Valve revision involved manipulation (n = 1 case), explantation of the malfunctioning valve and implantation of a new valve (n = 2), and amputation of the valve (n = 5). Six of eight patients had final intraocular pressures of < 21 mmHg on one or no medications at a mean interval of 15.9 months (range 5-36) after surgical revision. Transient postoperative hypotony was noted in three patients and chronic hypotony with loss of light perception in one patient. One explanted valve was examined and found to have partially fused leaflets. CONCLUSIONS: Surgical revision in cases of primary valve malfunction of the Krupin eye valve with disk may be accomplished relatively safely with an acceptable level of postoperative complications. The etiology of primary valve malfunction may be related to the sterilization process and prolonged storage before implantation.     

Area- and time-specific marginal capacity costs of electricity distribution

Marginal costs of electricity vary by time and location. In the past, researchers attributed the variations to factors related to electricity generation and transmission. These authors, however, have not analyzed possible variations in marginal distribution capacity costs (MDCC). The objectives of this paper are:

1. (i) to show that large MDCC variations are due to the dispersion in distribution capital expenditures by time and space,

2. (ii) to propose a method for quantifying the area- and time-specific MDCC in the presence of lumpy investments, and

3. (iii) to compare our MDCC estimates to those commonly used in the electric utility industry.

Our proposed method and its results were adopted by the California Public Utilities Commission (CPUC) in 1992 for Pacific Gas and Electric Company (PG&E), the largest privately owned electric utility in the U.S.