Strain‐rate‐dependent mechanical properties of polypropylene separator for lithium‐ion batteries

The mechanical integrity of battery separators is critical for battery safety and durability. A comprehensive study of strain‐rate‐dependent tensile and puncture properties of a polypropylene lithium‐ion battery separator is presented here with a new model. Due to anisotropy of the polymeric membrane, tensile testing was conducted for different directions. Results showed that tensile strength and elastic modulus were increased 1000% and 500%, respectively, for different directions. It was also demonstrated that tensile strength changed 10 to 25% with strain rate (1.67 × 10^?4 to 1.67 × 10^?1 s^?1) for different directions. An equation was obtained for the first time for flow stress versus strain rate at varied tensile directions with respect to machine direction. Moreover, puncture testing was performed and it was shown that puncture strength was increased 140% with increasing strain rate from 0.25 to 250 mm min^?1. Two failure modes were also observed in puncture samples. Finally, Eyring's model was used to calculate activation enthalpy of the porous polypropylene separator. © 2020 Society of Chemical Industry     

ANT-colony based disjoint set assortment in wireless sensor networks

Wireless Networks - Wireless sensor network (WSN) consists of small sized devices containing different sensors to monitor physical, environmental and medical conditions during surveillance of...     

Influence of Different Additives on the Interaction of Quinolone Antibiotic Drug with Surfactant: Conductivity and Cloud Point Measurement Study

Conductometric and cloud point (CP) measurement studies have been performed to investigate the interaction of tetradecyltrimethylammonium bromide (TTAB) and Triton® X-100 (TX-100) with ciprofloxacin hydrochloride (CFH) in different solvents over the temperature range of 295.15–315.15 K. CFH is used for the treatment of various bacterial infections. The observed critical micelle concentration (CMC) values of TTAB were found to be reduced in the presence of electrolytes (Na₂SO₄/Na₃PO₄), and this reduction proceeds with the elevation of salt concentration. The order of the CMC of TTAB follows the trend: > >. The observed CMC values of TTAB were found to increase with increasing temperature and decrease with increasing concentration of CFH in aqueous medium. The values of Gibbs free energy of micellization () for the TTAB/TTAB + CFH mixture were found to be negative, implying spontaneous micellization. The estimated CP of TX-100 decreases with increasing concentration of TX-100 in aqueous medium. The CP values first decrease with increasing concentration of CFH and then increase at higher concentration of CFH almost in all cases investigated. The values of free energy of clouding were found to be positive in all cases studied implying that phase separation of TX-100 was nonspontaneous. The other thermodynamic parameters associated with the micellization of TTAB and the phase separation of TX-100 were estimated and explained.     

Antimicrobial residues survey by LC-MS in food-producing animals in Lebanon

ABSTRACT

The treatment of animals with antimicrobial products may lead to the contamination of edible tissues by their residues, which may represent a risk to human health. Therefore, this study aimed to determine the level of antimicrobial residues in food-producing animals (chicken, beef, and milk) in Lebanon. A total of 310 samples were collected and analysed using an LC-MS/MS for the determination of 48 compounds belonging to different families in order to map their compliance according to the European Commission decision 2002/657/EC. Results show that 60% of the analysed samples were not contaminated by any residue, while 12% presented a concentration higher than the MRLs for tetracyclines, sulphonamides, quinolones, and macrolides. Results revealed that chicken were the most contaminated by antimicrobial residues, when compared to beef and milk. The obtained results demonstrate the uncontrolled use of antimicrobials in some Lebanese farms and claim for better management of livestock.     

Synthesis of amino-cosubstituted polyorganophosphazenes and fabrication of their nanoparticles for anticancer drug delivery

The development of safe drug carriers is cardinal in cancer therapy, which can target the cancer cells and release the loaded drug on-demand without damaging the healthy cells of the body. In our work, we synthesized three different biodegradable polymers, poly[(ethyl aminobezoate) (ethyl glycinato) phosphazenes] (PABGPs), in different mole ratio of side groups. The successful synthesis of these PABGPs was confirmed by ¹H NMR, ³¹P NMR, FT-IR, and gel permeation chromatography. These PABGPs were fabricated into drug (camptothecin, CPT, a hydrophobic anticancer drug) loaded nanoparticles. These drug-loaded nanoparticles showed good drug release behaviors under normal physiological conditions (pH 7.4 and temperature 37°C). These PABGPs-based nanoparticles may find their application as effective drug carriers for cancer therapy.     

Optimal production-inventory policy for make-to-order versus make-to-stock based on the M/Er/1 queuing model

This paper analyzes a multi-product production / inventory system where demands for each item arrive according to a Poisson process and the production time for each product has an Erlang distribution. The paper proposes an optimality condition that specifies whether each product should be produced make-to-stock or make-to-order. In the event a product should be produced make-to-stock, an approach for computing the optimal base-stock level is proposed. Numerical examples are given for illustrative purpose.     

Aggregation of Induction Motor Loads for Transient Stability Studies

This study investigates the dynamic representation of a group of induction motors by one or more equivalent motors. The unknown parameters of the equivalent are estimated through a weighted-least-squares procedure. Verification of simulated results with experimental ones suggests that a fifth order dynamic model of the aggregate with a ninth order parameter model is appropriate. The least squares technique was found to provide good convergence characteristics subject to satisfaction of the following conditions good initial estimate of the parameters, proper selection of acceleration factors and homogenity of the motor group.     

The Valve Metal Character of Zirconium as inferred from anode potential measurements in mineral acid solutions

A study on the value metal character of Zr in 0.1 M solutions of H₂SO₄, HNO₃, and H₃PO₄ has been performed using the anode potential as the primary variable in galvanostatic, potentiostatic, and capacity measurements. A method of surface pre-treatment, which suppresses both O₂ evolution and metal dissolution, has been described. Kinetic parameters of oxide growth have been calculated. The results indicate that:

• (i) the high field approximation is applicable following an exponential law, and
• (ii) the height and activation distance of the energy barrier for ion transport through the oxide phase (Verwey model) are the same three acids.

Measurements have been also made on the dielectric breakdown of oxide, and this occurs at potentials above 200 V. Direct capacity measurements give similar results as those based on reciprocal capacity calculated from galvanostatic experiments. It is concluded that the dominant anodic oxide species is ZrO₂ having a dielectric constant of 25. Open circuit potential measurements show that Zr is spontaneously oxidized in the three acids.     

Superfluid-insulator transition in disordered boson systems

We review the localization problem in two dimensions for interacting bosons in a random potential. This problem is intimately related to the study of ⁴ He adsorbed in porous media, Josephson junction arrays, disordered superconducting films and vortex glasses. Using path integral Monte Carlo techniques, we find a superfluid, a localized or Bose glass insulator with gapless excitations, and (at commensurate densities) a Mott insulator with a finite gap to excitations.