Conventional and microwave hydrothermal synthesis of zeolite ZSM-5 from the cupola slag

ZSM-5 type zeolites have been prepared from cupola slag waste using both conventional hydrothermal and microwave syntheses at 130–200 °C. The ZSM-5 was synthesized by conventional heating by taking advantage of the high silica content of cupola slags. Microwave heating increased the rate of ZSM-5 formation by 4 times at 150 °C compared with conventional heating. The Si/Al ratio of the ZSM-5 produced by the conventional heating and the microwave crystallization were similar 28 and 29, respectively. The conventional-heating produced ZSM-5 particles 3 μm in diameter, while, microwave-heating produced smaller ZSM-5 particles only 0.3 μm in size.     

Conventional hydrothermal synthesis of Na-A zeolite from cupola slag and aluminum sludge

Na-A type zeolites were prepared from two industrial wastes: the solid by-product of cupola slag and aluminum sludge from an aluminum plating plant. Two preparation methods using the same starting material compositions were carried out. In the first method, alkaline fusion was introduced, followed by the hydrothermal treatment to obtain sodium aluminosilicate which was then crystallized in NaOH solution under the condition of 90 ± 3 °C for 1–9 h with different H₂O/SiO₂ ratios. The result shows that higher H₂O/SiO₂ ratio increases the rate of crystallization. The largest amount of crystallinity for Na-A was found at 3 h. In the second method, alkaline hydrothermal treatment without fusion was carried out in the same condition as the first method. No Na-A zeolite was obtained by this method. The changes of the dissolved amounts of Si⁴⁺ and Al³⁺ in 3 M NaOH were investigated during the hydrothermal reaction.     

Morphological study of LLDPE‐NR reactive blending with maleic anhydride

A binary blend and ternary reactive blends of 90/10 LLDPE/NR using maleic anhydride (MA) as a reactive agent with and without dicumyl peroxide (DCP) were made at 150°C in an internal mixer. The fracture surfaces of the blends were conventionally observed by TEM and atomic force microscope, revealing that the rubber domains became smaller with the addition of MA and DCP. This suggested that the in situ graft copolymer (LLDPE‐g‐NR) was formed and acted as an in situ compatibilizer to enhance interfacial adhesion. This was further supported by FTIR results. Importantly, after removal of NR phase from the blends, the remaining LLDPE part was dissolved in hot xylene, purified by precipitation in methanol, and carefully prepared by solvent casting for TEM observation. The microstructures of the solvent‐extracted LLDPE from all blends are unlike that of solvent cast‐ pure LLDPE, which shows only crystalline structure. This leads to an unambiguous way to disclose the existence of an in situ graft copolymer. The solvent‐extracted LLDPE from the blends shows mixed morphology of LLDPE crystalline structure and its in situ graft copolymer as nanofibrillar networks of the NR phase protruded from the amorphous region of the LLDPE matrix due to spinodal decomposition by the solvent removal. Adding MA makes more branches and fibril connections of the NR phase, whereas a thinner fibril network and more links of the NR and the LLDPE amorphous region are found in the reactive blend with MA and DCP, where the most compatibilized blend is obtained. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007