Microporous anisotropic phase inversion membranes from bisphenol A polycarbonate: Effect of additives to the polymer solution

Phase inversion is a very flexible technique to obtain membranes with a large sort of morphologies. Membrane properties can vary greatly depending on the kind of polymer system used. Bisphenol A polycarbonate (PC) could be used as a phase inversion membrane base polymer, and presents very good properties. Nevertheless, very little information on membrane preparation using PC and the phase inversion process can be found in the literature. In this work flat‐sheet microporous membranes were obtained by the phase inversion process using the immersion precipitation technique. A new polymer system was studied, consisting of polycarbonate, N‐methyl‐2‐pyrrolidone as solvent, water as the nonsolvent, and an additive. The influence of some parameters on membrane morphology, such as polymer solution composition, exposition time before immersion into the precipitation bath, and the kind of additive was investigated. Precipitation was followed using light transmission experiments and membrane morphology was observed through Scanning Electron Microscopy (SEM). The viscosity and cloud points of all polymer solutions were also determined. The results were related to the studied synthesis parameters, using the basic principles of membrane formation by the phase inversion technique, looking forward to establishing criteria to control the morphology of flat‐sheet membranes using polycarbonate as the base polymer. The results showed that both additives were able to increase pore interconnectivity and even suppress macrovoid formation. The decrease in the miscibility region of the polymer system and increase in mass transfer resistance are found to be the determining factors during polymer solution precipitation. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 3085–3096, 2002     

Analysis of surface integrity for minimum quantity lubricant—MQL in grinding

The quality of machined components is currently of high interest, for the market demands mechanical components of increasingly high performance, not only from the standpoint of functionality but also from that of safety. Components produced through operations involving the removal of material display surface irregularities resulting not only from the action of the tool itself, but also from other factors that contribute to their superficial texture. This texture can exert a decisive influence on the application and performance of the machined component. This article analyzes the behavior of the minimum quantity lubricant (MQL) technique and compares it with the conventional cooling method. To this end, an optimized fluid application method was devised using a specially designed nozzle, by the authors, through which a minimum amount of oil is sprayed in a compressed air flow, thus meeting environmental requirements. This paper, therefore, explores and discusses the concept of the MQL in the grinding process. The performance of the MQL technique in the grinding process was evaluated based on an analysis of the surface integrity (roughness, residual stress, microstructure and microhardness). The results presented here are expected to lead to technological and ecological gains in the grinding process using MQL.     

Tree pattern mining with tree automata constraints

Most work on pattern mining focuses on simple data structures such as itemsets and sequences of itemsets. However, a lot of recent applications dealing with complex data like chemical compounds, protein structures, XML and Web log databases and social networks, require much more sophisticated data structures such as trees and graphs. In these contexts, interesting patterns involve not only frequent object values (labels) appearing in the graphs (or trees) but also frequent specific topologies found in these structures. Recently, several techniques for tree and graph mining have been proposed in the literature. In this paper, we focus on constraint-based tree pattern mining. We propose to use tree automata as a mechanism to specify user constraints over tree patterns. We present the algorithm CoBMiner which allows user constraints specified by a tree automata to be incorporated in the mining process. An extensive set of experiments executed over synthetic and real data (XML documents and Web usage logs) allows us to conclude that incorporating constraints during the mining process is far more effective than filtering the interesting patterns after the mining process.     

Anodic stripping voltammetric determination of copper(II) using a functionalized carbon nanotubes paste electrode modified with crosslinked chitosan

The development and application of a functionalized carbon nanotubes paste electrode (CNPE) modified with crosslinked chitosan for determination of Cu(II) in industrial wastewater, natural water and human urine samples by linear scan anodic stripping voltammetry (LSASV) are described. Different electrodes were constructed using chitosan and chitosan crosslinked with glutaraldehyde (CTS-GA) and epichlorohydrin (CTS-ECH). The best voltammetric response for Cu(II) was obtained with a paste composition of 65% (m/m) of functionalized carbon nanotubes, 15% (m/m) of CTS-ECH, and 20% (m/m) of mineral oil using a solution of 0.05 mol L⁻¹ KNO₃ with pH adjusted to 2.25 with HNO₃, an accumulation potential of −0.3 V vs. Ag/AgCl (3.0 mol L⁻¹ KCl) for 300 s and a scan rate of 100 mV s⁻¹. Under these optimal experimental conditions, the voltammetric response was linearly dependent on the Cu(II) concentration in the range from 7.90 × 10⁻⁸ to 1.60 × 10⁻⁵ mol L⁻¹ with a detection limit of 1.00 × 10⁻⁸ mol L⁻¹. The samples analyses were evaluated using the proposed sensor and a good recovery of Cu(II) was obtained with results in the range from 98.0% to 104%. The analysis of industrial wastewater, natural water and human urine samples obtained using the proposed CNPE modified with CTS-ECH electrode and those obtained using a comparative method are in agreement at the 95% confidence level.     

Voltammetric sensing of tryptophan in dark chocolate bars,skimmed milk and urine samples in the presence of dopamine and caffeine

Journal of Applied Electrochemistry - The present work reports the development of screen-printed electrode (SPE) using flexible polyester sheets modified with nanodiamond (ND), Au nanoparticles...     

Physicochemical Properties,Lipid Oxidation,and Fatty Acid Composition of Sausage Prepared with Meat of Young Nellore Bulls Fed a Diet with Lauric Acid

This study evaluates the quality of sausage obtained from the meat of Nellore cattle fed diets containing different levels (0, 5, 10, and 15 g per kg total DM) of lauric acid (C12:0) from palm kernel cake. A linear reduction (p ≤ 0.05) in lipid oxidation, as reflected by linear decreases in the lightness (L*), yellowness (b*), and saturation (C*) color parameters, is observed on days 7, 14, and 21 of maturation of sausage, and these decreases are accompanied by linear increases in the redness (a*) color and the linoleic (C18:2n–6) and linolenic (C18:3n–3) fatty acid contents. The inclusion of lauric acid in the diet induces linear reductions in the shear force and cooking loss and does not significantly affect various indices, including the centesimal composition, water activity, water holding capacity, composition of most fatty acids (FA), hypocholesterolemic‐to‐hypercholesterolemic FA ratio, atherogenicity, thrombogenicity, and desirable fatty acids. The use of dietary lauric acid from palm kernel cake is recommended at doses up to 15 g per kg because its presence reduces lipid oxidation and improves color parameters, softness, and linoleic and linolenic FA without affecting the FA composition of sausage from Nellore bull's meat. Practical applications : Sausages are products manufactured from chopped or ground meats packaged into animal casings. This product appeared in Brazil through the adaptation of traditional recipes brought by German and Italian immigrant families to weather conditions and the national palate. However, due to its production characteristics, sausage can become a product with lipid characteristics that are undesirable for human consumption. The inclusion of lauric acid (C12:0) in the animal diet might change the biohydrogenation process in the rumen, improve the quality of the deposited FA and reduce lipid oxidation in sausage manufactured from meat. The FA composition and physicochemical properties of sausage predict its acceptance by the consumer market. An optimal advantage would be achieved if these products can be used as not only preservatives but also functional ingredients with antioxidant properties and products for the treatment of metabolic syndrome and cardiovascular diseases through atherogenic action.     

Effects of porosity,dry unit weight,cement content and void/cement ratio on unconfined compressive strength of roof tile waste-silty soil mixtures

One of the conventional ways to improve the mechanical behavior of soils is to mix them with cementing agents such as cement, lime and fly ash. Recently, introduction to alternative materials or sub-products that can be adopted to improve the soil strength is of paramount importance. Therefore, the present study aims to investigate the effects of porosity (η), dry unit weight (γ_d) of molding, cement content (C) and porosity/volumetric cement content ratio (η/C_iv) or void/cement ratio on the unconfined compressive strength (q_u or UCS) of silty soil–roof tile waste (RT) mixtures. Soil samples are molded into four different dry unit weights (i.e. 13 kN/m³, 13.67 kN/m³, 14.33 kN/m³ and 15 kN/m³) using 3%, 6% and 9% cement and 5%, 15% and 30% RT. The results show that with the addition of cement, the strength of the RT–soil mixtures increases in a linear manner. On the other hand, the addition of RT decreases q_u of the samples at a constant percentage of cement, and the decrease in porosity can increase q_u. A dosage equation is derived from the experimental data using the porosity/volumetric cement content ratio (η/C_iv) where the control variables are the moisture content, crushed tile content, cement content and porosity.     

Simulation of Temperature and Stress Fields during RCC Dam Construction

The worldwide experience in the construction of roller-compacted concrete (RCC) dams together with the use of numerical solutions, allows the simulation of different scenarios in a computer. It is well documented that thermal control is one of the most important problems for RCC dam construction. The dam temperature changes due to the heat produced by the internal hydration of concrete and the environmental boundary conditions influencing the elastic modulus and creep properties of concrete. The construction process was simulated to study how the temperature and stress change during dam construction. The numerical methodology considers the effect of temperature on the elastic modulus and the creep behavior of concrete. A 3D finite-element program was developed to simulate the construction process. An engineering application of this methodology is presented by simulating the construction of an RCC gravity dam in southern China. The results show how the temperature and stress change with the construction process. The results also show that it is feasible to build RCC dams in low temperature seasons without additional temperature control measures.     

From the Sup-Decomposition to Sequential Decompositions

W-operators are discrete set operators that are both translation invariant and locally defined within a finite window W. A particularly interesting property of W-operators is that they have a sup-decomposition in terms of a family sup-generating operators, that are parameterized by the operator basis. The sup-decomposition has a parallel structure that usually is not efficient for computation in conventional sequential machines. In this paper, we formalize the problem of transforming sup-decompositions into purely sequential decompositions (when they exist). The techniques were developed for general W-operators, specialized for increasing W-operators and applied on operators built by compositions of dilations and erosions.