Multiexponential T2 relaxation in Fricke agarose gels: implications for NMR dosimetry

NMR relaxation times T1 and T2 of agarose and Fricke agarose gels have been measured in the range 17-51 MHz. The analysis of the spin echo curves indicates a multiexponential behaviour, characterized by three components, at all the examined frequencies. The relative T2 values, ranging from a few to a hundred milliseconds, can be attributed to different species of water molecules present in the gel. Two of these components are characterized by relaxation rates R2a and R2b, more sensitive than R1 to gamma irradiation, the sensitivity S being S(R1) = 0.066 s-1 Gy-1, S(R2a) = 0.088 s-1 Gy-1, S(R2b) = 0.17 s-1 Gy-1. The three T2 values decrease as a function of frequency, but no gain in dose sensitivity is obtained by changing the working frequency in the examined range. The relaxivity of agarose gels containing ferrous or ferric ions has also been measured and found to be different from those of the corresponding solutions in the absence of agarose. Thus it was possible to estimate the irradiation yield from three independent parameters, R1, R2a and R2b. No effect of the dose rate or of the source energy has been observed for any of these parameters.     

Quantity,controls and functions of large woody debris in Midwestern USA streams

Large woody debris (LWD) can increase stream habitat heterogeneity by providing structure, altering flow patterns, enhancing sediment deposition, forming pools and retaining organic matter. In North America, the role of LWD has been studied extensively in streams of mature forests (e.g. Pacific Northwest), but few studies have assessed LWD in streams of younger forests (e.g. Midwestern USA). Our objectives were to: (1) quantify the volume and abundance of LWD in a set of Midwestern streams; (2) evaluate possible factors influencing LWD quantity; (3) identify the functional roles of LWD; and (4) compare LWD levels in the upper Midwest to those elsewhere in North America. In 2002 and 2003, we measured LWD and geomorphological variables in 15 low‐gradient streams draining previously logged watersheds in the Upper Peninsula of Michigan. Mean (±SE) LWD volume (0.77 ± 0.12 m³ 100 m⁻²) and abundance (33 ± 3 pieces 100 m⁻¹) were 71% and 10% lesser, respectively, than in streams of similar gradient elsewhere in North America. Channel shape (width:depth ratio) explained 30% of the variation in LWD volume (multiple stepwise regression, P = 0.015) while LWD length and length:channel width combined, explained 72% of the variation in LWD density (multiple stepwise regression, P < 0.0001). About 50% of the LWD either stored sediment or stabilized banks and 14% of the LWD formed pools, although pool density was not significantly related to LWD volume or density. LWD levels, overall, were low in upper Midwestern streams, but the relative importance of that LWD to ecosystem function may be magnified in these wood‐poor systems. Copyright © 2006 John Wiley & Sons, Ltd.     

High glass transition temperature polyester coatings for the protection of stones

Copolymers of lactic acid with mandelic or salicylic acid were synthetized through ring‐opening polymerization (ROP) and tested as protective coatings for stones. Most notably, glass transition temperature (T_g), hydrophobicity, and UV barrier properties were increased, making these materials more suitable as protective coating for outdoor stones than poly(lactic acid). A T_g of 76°C was obtained for the alternating copolymer lactic acid/mandelic acid and it was considerably higher than the one of poly(lactic acid) with similar molecular weight (50–55°C). Furthermore, the introduction of a perfluorinated moiety as chain‐end group, using a perfluoro alcohol as initiator of the ROP process, allowed to increase the hydrophobicity and stability of the new coatings. These polymers showed a good protective efficiency when applied on marble stones and preliminary stability tests under solar light showed low degradation, good stability to photo‐oxidative conditions, and negligible color changes after an aging time of 1000 h. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42323.     

Aromatic triblock polymers from natural sources as protective coatings for stone surfaces

Aromatic triblock polymers were synthesized, characterized, and tested as protective coatings for stone surfaces. Syntheses were carried out by a ring opening polymerization process from specifically synthesized monomers ((3S)‐6‐methyl‐3‐phenyl‐1,4‐dioxan‐2,5‐dione or 1,4‐benzodioxepin‐3‐methyl‐2,5‐dione) and a perfluoropolyether diol (Fluorolink D10‐H), as chain initiator. Polymers were characterized through spectroscopic and analytical techniques while their stability under photo‐oxidative conditions was tested using a Solar Box. An excellent stability to environmental conditions was noticed with very low degradation during accelerated aging tests up to 1000 h, as detected by FTIR, molecular weight, DSC and weight loss. Furthermore, these polymers formed an excellent protective coating on the stone surface as shown by capillary water absorption test. Finally, as expected, very stable coatings were obtained as shown by aging tests. The stone surface showed negligible changes of color and a good hydrorepellency confirming a good durability of treatments. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43377.     

Sewage sludge digestion at increased micropollutant content

Research was conducted, which aim was to evaluate quantitative and qualitative PCB changes in sewage sludge during mesophilic digestion, and the influence of those compound concentration above acceptable level (1.9 mg kg⁻¹ of sludge dry matter), also nickel and cadmium ions, on mesophilic digestion process. Before and after the digestion, concentration of seven PCB congeners, Ni and Cd in particular chemical fractions of the sludge was analyzed.     

Fricke gel dosimetry in boron neutron capture therapy

Gel dosimetry allows three-dimensional (3D) measurement of absorbed dose in tissue-equivalent dosemeter phantoms. Gel phantoms are imaged using optical techniques. In neutron capture therapy (NCT), properly designed gel dosemeters can give 3D dose distributions, due to the various components of the secondary radiation, in phantoms exposed in the thermal or epithermal column of a nuclear reactor. In addition to the therapeutic dose arising from the reaction 10B(n,alpha)7Li, the other dose components are also obtainable, i.e. the gamma dose (due to reactor background and to the reaction 1H(n,gamma)2H of thermal neutrons with hydrogen, the dose due to protons emitted in the reaction 14N(n,p)14C of thermal neutrons with nitrogen and the dose due to recoil protons resulting from elastic scattering of epithermal neutrons.     

Coupling hydrothermal liquefaction and aqueous phase reforming for integrated production of biocrude and renewable H2

Lignin-rich stream from lignocellulosic ethanol production was converted into biocrude by continuous hydrothermal liquefaction (HTL) while hydrogen was produced by aqueous phase reforming (APR) of the HTL aqueous by-product. The effects of Na₂CO₃ and NaOH were investigated both in terms of processability of the feedstock as well as yield and composition of the obtained products. A maximum biocrude yield of 27 wt% was reached in the NaOH-catalyzed runs. A relevant amount of dissolved phenolics were detected in the co-produced aqueous phase (AP), and removed by liquid–liquid extraction using butyl acetate or diethyl ether, preserving the APR catalyst stability and reaching an hydrogen yield up to 146 mmol H₂ L⁻¹ AP. Preliminary mass balances integrating HTL and APR showed that the hydrogen provided by APR may account for up to 46% of the hydrogen amount theoretically required for upgrading the HTL biocrude, thus significantly improving the process performance and sustainability.     

Mechanism of Plastic Flow in Titanium at Low and High Temperatures

An investigation was made of the mechanism of plastic flow in coarse grained specimens of both sponge and iodide titanium at low (?196°C) and high (500° and 800°C) temperatures. Deformation by slip occurs predominantly on a {1010| plane and in a <1120> direction over this entire temperature range, and secondary slip on 1011 planes becomes more prevalent with increasing temperature. The crystallographic habit of the predominant twin type is temperature-dependent, and deformation by twinning increases as the temperature of testing is lowered. Kink bands were not observed at —196°C and rarely at the high temperatures.