Preface of special issue of CCSN2016

Microsystem Technologies -     

Properties of multiple oxide-bonded porous SiC ceramics prepared by an infiltration technique

Multiple oxide-bonded porous SiC ceramics were fabricated by infiltrating a porous powder compact of SiC and alumina with cordierite sol followed by sintering at 1300-1400°C in air for 3 hours. The microstructures, phase components, mechanical properties, and air permeation behavior of the developed porous ceramics were examined and compared with materials obtained by the traditional powder processing route. The porosity, average pore diameter, and flexural strength of the ceramics varied from 33 to 37 vol%, ~12-14 μm and ~23-39.6 MPa, respectively, with variation in sintering temperature. The X-ray diffraction results reveal that both the amount of cordierite and mullite as the binder increased with increase in sintering temperature. In addition, it was found that the addition of alumina in powder form effectively enhanced the strength due to formation of mullite in the bond phase in contrast to the samples prepared without alumina additive. To determine the suitability of the material in particulate filtration application, particle collection efficiency of the filter material was evaluated theoretically using single collector efficiency model.     

Mapping the dynamics of knowledge base of innovations of R&;D in Bangladesh: triple helix perspective

Triple helix (TH) collaborations involving university, industry and government provide a networked infrastructure for shaping the dynamic fluxes of knowledge base of innovations locally and these fluxes remain emergent within the domains. This study maps these emergence dynamics of the knowledge base of innovations of Research & Development (R&D) by exploring the longitudinal trend of systemness within the networked research relations in Bangladesh on the TH model. The bibliometric data of publications collected from the Science Citation Index (SCI), the social sciences and the arts and humanities for analysis of science indicators and the patent data collected from the US Patent Office to analyze the patent success ratio as a measure of innovation within TH domains. The findings show that the network dynamics have varied considerably according to the R&D policies of the government. The collaboration patterns of co-authorship relations in the SCI publications prominently increased, with some variation, from 1996 to 2006. Nevertheless, inter-institutional collaboration negatively influenced by the national science and technology (S&T) research policies in the last 5 years due to their evaluation criteria. Finally, the findings reveal that the R&D system of Bangladesh is still undergoing a process of institutionalizing S&T and has failed to boost its research capacity for building the knowledge base of innovations by neglecting the network effects of TH dynamics.     

Long‐Range Nanoparticle Surface‐Energy‐Transfer Ruler for Monitoring Photothermal Therapy Response

A recent gold nanotechnology‐driven approach opens up a new possibility for the destruction of cancer cells through photothermal therapy. Ultimately, photothermal therapy may enter into clinical therapy and, as a result, there is an urgent need for techniques to monitor the tumor response to therapy. Driven by this need, a nanoparticle surface‐energy‐transfer (NSET) approach to monitor the photothermal therapy process by measuring a simple fluorescence intensity change is reported. The fluorescence intensity change is due to the light‐controlled photothermal release of single‐stranded DNA/RNA via dehybridization during the therapy process. Time‐dependent results show that just by measuring the fluorescence intensity change, the photothermal therapy response during the therapy process can be monitored. The possible mechanism and operating principle of the NSET assay are discussed. Ultimately, this NSET assay could have enormous potential applications in rapid, on‐site monitoring of the photothermal therapy process, which is critical to providing effective treatment of cancer and multidrug‐resistant bacterial infections.     

MHD non-Darcian mixed convection heat and mass transfer over a non-linear stretching sheet with Soret-Dufour effects and chemical reaction

A study has been carried out to analyze the effects of variable thermal conductivity, Soret (thermal-diffusion) and Dufour (diffusion-thermo) on MHD non-Darcy mixed convection heat and mass transfer over a non-linear stretching sheet embedded in a saturated porous medium in the presence of thermal radiation, viscous dissipation, non-uniform heat source/sink and first-order chemical reaction. The governing differential equations transform into a set of non-linear coupled ordinary differential equations using similarity analysis. Similarity equations are then solved numerically using shooting algorithm with Runge-Kutta Fehlberg integration scheme over the entire range of physical parameters. A comparison with previously published work has been carried out and the results are found to be in good agreement. Graphical presentation of the local skin-friction coefficient, the local Nusselt number and the local Sherwood number as well as the temperature profiles show interesting features of the physical parameters.     

Low Cost Portable Solution for Real-Time Complete Detection and Analysis of Heart Sound Components

Wireless Personal Communications - Detection of heart sound and analysis is required to determine heart rate, heart sound components (S1, S2 and murmurs), and is an important step to...     

Effect of Porosity on Structure,Young's Modulus,and Thermal Conductivity of SiC Foams by Direct Foaming and Gelcasting

The study demonstrates the aqueous processing of solid‐state‐sintered SiC foams by gelcasting technique. Aside from increasing strength of green bodies, gelcasting monomers were the source of carbon additive which helped in sintering of SiC foams. Sintered foams with the relative density (RD) between 0.44 and 0.11 were processed by direct foaming of SiC slurries followed by gelcasting and sintering. Structural analysis by X‐ray tomography showed the presence of spherical pores with bimodal pore size distribution and the proportion of large size cell and their interconnectivity increased in low RD foams. SEM study revealed that decreased RD resulted in gradual changes in the strut microstructure from the grains with faceted interface to smooth interfaced grains. The analysis of changes in Young's modulus and thermal conductivity with RD were in agreement with the Ashby model for open cell foams.     

Highly sensitive and selective dynamic light-scattering assay for TNT detection using p-ATP attached gold nanoparticle

TNT is one of the most commonly used nitro aromatic explosives for landmines of military and terrorist activities. As a result, there is an urgent need for rapid and reliable methods for the detection of trace amount of TNT for screenings in airport, analysis of forensic samples, and environmental analysis. Driven by the need to detect trace amounts of TNT from environmental samples, this article demonstrates a label-free, highly selective, and ultrasensitive para-aminothiophenol (p-ATP) modified gold nanoparticle based dynamic light scattering (DLS) probe for TNT recognition in 100 pico molar (pM) level from ethanol:acetonitile mixture solution. Because of the formation of strong π-donor-acceptor interaction between TNT and p-ATP, para-aminothiophenol attached gold nanoparticles undergo aggregation in the presence of TNT, which changes the DLS intensity tremendously. A detailed mechanism for significant DLS intensity change has been discussed. Our experimental results show that TNT can be detected quickly and accurately without any dye tagging in 100 pM level with excellent discrimination against other nitro compounds.     

On the electrophilic character of molecules through its relation with electronegativity and chemical hardness

Electrophilicity is an intrinsic property of atoms and molecules. It probably originates logistically with the involvement in the physical process of electrostatics of soaked charge in electronic shells and the screened nuclear charge of atoms. Motivated by the existing view of conceptual density functional theory that similar to electronegativity and hardness equalization, there should be a physical process of equalization of electrophilicity during the chemical process of formation of hetero nuclear molecules, we have developed a new theoretical scheme and formula for evaluating the electrophilicity of hetero nuclear molecules. A comparative study with available bench marking reveals that the hypothesis of electrophilicity and equalization, and the present method of evaluating equalized electrophilicity, are scientifically promising.