Effect of gamma irradiation on the optical properties of CR-39 polymer

The UV-Visible absorption spectra of virgin and gamma irradiated (20–800 kGy) CR-39 polymer have been deduced by using Shimadzu Double beam Double Monochromator UV-Visible Spectrophotometer (UV-2550). The existence of the peaks, their shifting and broadening as a result of gamma irradiation has been discussed. Finally the indirect and direct band gap in virgin and gamma irradiated CR-39 has been determined. The values of indirect band gap have been found to be lower than the corresponding values of direct band gap.     

Correction to: Attention-based multimodal contextual fusion for sentiment and emotion classification using bidirectional LSTM

Multimedia Tools and Applications - A Correction to this paper has been published: https://doi.org/10.1007/s11042-021-10591-y     

Fabrication and characterization of electrospun psyllium husk-based nanofibers for tissue regeneration

The present study reports for first time the blending of psyllium husk (PH) powder/gelatin (G) in the polymer-rich composition of polyvinyl alcohol (PVA) to make an electrospinnable solution. The composite was prepared in 3 different ratios viz., 100% (wt/wt) (PVA + PH), 75% + 25% (PVA + 75PH + 25G) (wt/wt) and 50% + 50% (PVA + 50PH + 50G) (wt/wt) in 6% PVA solution. Optimum electrospinning parameters were evaluated for all the prepared blends. The fabricated nanofibers were characterized by scanning electron microscopy (SEM), attenuated total reflectance-Fourier transform infrared, differential scanning calorimetry, porosity percentage, and fiber orientation using ImageJ software. A qualitative in vitro degradation study at room temperature is supported by SEM images. The cellular interactions were characterized by MTT assay of NIH-3T3 fibroblast cells for 2 and 4 days with an optimum cell growth of >50% by fourth day of culture and long-term cultivation of L929-RFP cells was observed for 10 days. The nanofibers were formed in the range of 49–600 nm. PVA + 75PH + 25G when cultured with L929-RFP cells exhibited highest fluorescence intensity and thus supported cellular proliferation significantly. Based on the results obtained from various analyses, we anticipate that fabricated psyllium-based nanofiber can be used as a promising candidate for wound healing and other biomedical applications.     

Accuracy improvement method for flank milling surface design

In this paper, a variation of the method of designing surfaces for flank milling proposed by Li et al. 2006 (Surface design for flank milling. Submitted to CAD, July) is presented. Li’s method is based on the premise that the surface flank milled by a cylindrical tool can be represented by a NURBS surface and can be used by designers to build efficient impellers, blades and other engineering parts. In the proposed method, a four control point curve is used to approximate the grazing curves and for subsequent generation of a polynomial surface. This eliminates the need of weights for the interior control points and still results in a good surface. The accuracy of the surface can be controlled by adding control points. Examples are given to demonstrate the proposed surface design method.     

Experimental investigations in powder mixed electric discharge machining of Ti–35Nb–7Ta–5Zrβ-titanium alloy

The present research is the first type of study in which the application of powder mixed electrical discharge machining (PMEDM) for the machining of β-phase titanium (β-Ti) alloy has been proposed. β-Ti alloys are new range of titanium alloys, which has a wide-spread application in dental, orthopedics, shape memory, and stents. The aim of the present study is to fabricate submicro- and nanoscale topography by PMEDM process to enhance the biocompatibility without affecting machining efficiency. The effect of Si powder concentration along with pulse current and duration on the surface and machining characteristics has been investigated. A significant decrease in surface crack density on the machined surface with 4 g/l Si powder concentration was observed. When β-Ti alloy was modified at 15 A pulse current, longer pulse interval with 8 g/l concentration of Si powder particles, the interconnected surface porosities with pore size 200–500 nm was observed. Moreover, at Si powder concentrations of 2 g/l and 4 g/l, the recast layer thickness is 8 µm and 2–3 µm, respectively. Elemental mapping analysis confirmed that PMEDM also generated carbides and oxides enriched surface, a favorable surface chemistry to enhance the biocompatibility of β-Ti alloy. Furthermore, PMEDM also enhances the machining performance by improving material removal rate and reducing tool wear rate.     

Analysis of Reflectance Properties in 1D Photonic Crystal Containing Metamaterial and High-Temperature Superconductor

In the present work, reflectance properties of one-dimensional photonic crystal (1D PC) containing a metamaterial and high-temperature superconductor have been investigated theoretically and analyzed. The reflectance/transmittance spectrum of the proposed structure is obtained by using the characteristic or transfer-matrix method (TMM). The results show that by increasing the thickness of the metamaterial layer, the width of the second reflection band decreases while the width of the first reflection band remains almost the same though it shifts towards the higher frequency side. In addition to this, a new band gap arises in the lower side of frequency. But, when the thickness of the superconductor layer is increased, the width of both the bands increases and no additional band arises in this case. Moreover, the reflection band is also affected by varying the operating temperature of the superconducting layer and the results show that bands get narrower by increasing the operating temperature. Finally, the effect of incident angle on the reflection band has been discussed for both transverse electric (TE) and transverse magnetic (TM) polarizations.     

Automated test data generation for branch testing using incremental genetic algorithm

Cost of software testing can be reduced by automated test data generation to find a minimal set of data that has maximum coverage. Search-based software testing (SBST) is one of the techniques recently used for automated testing task. SBST makes use of control flow graph (CFG) and meta-heuristic search algorithms to accomplish the process. This paper focuses on test data generation for branch coverage. A major drawback in using meta-heuristic techniques is that the CFG paths have to be traversed from the starting node to end node for each automated test data. This kind of traversal could be improved by branch ordering, together with elitism. But still the population size and the number of iterations are maintained as the same to keep all the branches alive. In this paper, we present an incremental genetic algorithm (IGA) for branch coverage testing. Initially, a classical genetic algorithm (GA) is used to construct the population with the best parents for each branch node, and the IGA is started with these parents as the initial population. Hence, it is not necessary to maintain a huge population size and large number of iterations to cover all the branches. The performance is analyzed with five benchmark programs studied from the literature. The experimental results indicate that the proposed IGA search technique outperforms the other meta-heuristic search techniques in terms of memory usage and scalability.     

On finding fundamental cut sets

In this paper a linear time algorithm is proposed for preprocessing the edges of a graph. After preprocessing (in linear time), the fundamental cut set of any tree edge can be determined in time proportional to the size of that cut set.     

The Network as a Storage Device: Dynamic Routing with Bounded Buffers

We study dynamic routing in store-and-forward packet networks where each network link has bounded buffer capacity for receiving incoming packets and is capable of transmitting a fixed number of packets per unit of time. At any moment in time, packets are injected at various network nodes with each packet specifying its destination node. The goal is to maximize the throughput, defined as the number of packets delivered to their destinations. In this paper, we make some progress on throughput maximization in various network topologies. Let n and m denote the number of nodes and links in the network, respectively. For line networks, we show that Nearest-to-Go (NTG), a natural distributed greedy algorithm, is -competitive, essentially matching a known lower bound on the performance of any greedy algorithm. We also show that if we allow the online routing algorithm to make centralized decisions, there is a randomized polylog(n)-competitive algorithm for line networks as well as for rooted tree networks, where each packet is destined for the root of the tree. For grid graphs, we show that NTG has a competitive ratio of while no greedy algorithm can achieve a ratio better than . Finally, for arbitrary network topologies, we show that NTG is -competitive, improving upon an earlier bound of O(mn). An extended abstract appeared in the Proceedings of the 8th Workshop on Approximation Algorithms for Combinatorial Optimization Problems, APPROX 2005, Berkeley, CA, USA, pp. 1–13, Lecture Notes in Computer Science, vol. 1741, Springer, Berlin. S. Angelov is supported in part by NSF Career Award CCR-0093117, NSF Award ITR 0205456 and NIGMS Award 1-P20-GM-6912-1. S. Khanna is supported in part by an NSF Career Award CCR-0093117, NSF Award CCF-0429836, and a US-Israel Binational Science Foundation Grant. K. Kunal is supported in part by an NSF Career Award CCR-0093117 and NSF Award CCF-0429836.