Phase behavior in liquid crystallization for diblock copolymers consisting of rubbery amorphous and side-chain liquid crystalline components

Phase behavior in liquid crystallization was studied for a series of liquid crystalline (LC) diblock copolymers consisting of rubbery amorphous and side-chain liquid crystalline components, poly(n-butyl acrylate) (PBA) and poly[11-(4′-cyanophenyl-4″-phenoxy)undecyl acrylate] (PLC), respectively, using a time-resolved small-angle X-ray scattering (SAXS) techniques, DSC and polarized optical microscopy (POM). The block copolymers used had three kinds of copolymer compositions, 44, 20 and 15 wt% of PLC compositions (BLC44, BLC20 and BLC15, respectively). BLC44 showed a smectic liquid crystalline structure. In the process of liquid crystallization for BLC44, the SAXS peak due to the microphase separation structure existing before liquid crystallization was changed continuously to be at a smaller angular side, and at almost the same time, a new peak appeared at a further smaller angular side and developed. The former peak disappeared with the development of liquid crystallization. The behavior of these SAXS peaks suggests that the microphase separation structure was changed discretely at the transition from isotropic to smectic and that two phases coexist in the early stage of the liquid crystallization. The coexistence of two peaks in the early stage of the liquid crystallization corresponded to the POM observation. In the isotropization process, coexistence of two phases was not observed. For BLC20 exhibiting a cylindrical structure in both isotropic and liquid crystalline states, the liquid crystalline structure was not smectic but probably nematic, and the spacing was changed continuously in liquid crystallization. No liquid crystallization was observed in SAXS, POM and DSC for BLC15. The orientation of smectic layers within lamellar domains was investigated using 2D-SAXS images. The smectic layer was aligned perpendicularly to the lamellar interface.     

Stability,cure properties,and applicability as one part adhesives of systems of divalent metal salts of mono(hydroxyethyl) phthalate–anhydride–bisepoxide

Heterogeneous curable compositions of divalent metal salts of mono(hydroxyethyl) phthalate–anhydride–bisphenol A diglycidyl ether (BADG) systems were prepared by merely mixing these components at room temperature. Stability at room temperature and cure properties at high temperature of the compositions were investigated for evaluating their applicability as one part adhesive. It was found that the systems containing Mg were generally more stable than those containing Ca. Similarly, at 150°C the Ca-containing systems showed generally shorter gelation time than the Mg-containing ones, due to the fact that the Ca salt dissolves more rapidly and enters into the addition reaction with the anhydride, leading to the faster appearance of the catalytic activities of the Ca carboxylate group. Among the various combinations of components, the metal salt–succinic anhydride (SA)–BADG systems were stable at room temperature for more than 6 months and rapidly cured at high temperature, showing excellent adhesive properties. This result indicates that the SA-containing systems should be of interest in applications to one part adhesives.     

Bacteremia caused by the Bacteroides fragilis group in patients with hematologic diseases

During a 22-year period, 13 patients with hematologic diseases developed bacteremia caused by the Bacteroides fragilis group, with a frequency which remained almost unchanged. Nine patients (69%) had polymicrobial infections. Acute leukemia was the most common underlying disease. The lower intestinal tract (necrotizing enterocolitis and anorectal abscesses) was the most common source of infection. Prior antibiotic therapy was the most frequent host condition before bacteremia, followed by cancer chemotherapy, neutropenia, thrombocytopenia and hypoproteinemia. Septic shock occurred only in seven patients with polymicrobial infections. Six patients, including five with shock, died within a week of onset, while the other seven survived for at least three weeks. Despite its clinical similarity to aerobic gram-negative infection, bacteremia due to the B. fragilis group may well, therefore, be suspected particularly when neutropenic patients who present with lower intestinal symptomatology develop a persistent fever unresponsive to the initial empiric antibiotic therapy.     

P-MOSFET's with ultra-shallow solid-phase-diffused drain structureproduced by diffusion from BSG gate-sidewall

A p-MOSFET structure with solid-phase diffused drain (SPDD) is proposed for future 0.1-μm and sub-0.1-μm devices. Highly doped ultrashallow p⁺ source and drain junctions have been obtained by solid-phase diffusion from a highly doped borosilicate glass (BSG) sidewall. The resulting shallow, high-concentration drain profile significantly improves short channel effects without increasing parasitic resistance. At the same time, an in situ highly-boron-doped LPCVD polysilicon gate is introduced to prevent the transconductance degradation which arises in ultrasmall p-MOSFETs with lower process temperature as a result of depletion formation in the p⁺-polysilicon gate. Excellent electrical characteristics and good hot-carrier reliability are achieved     

Color registration error reduction method compensating the influence of belt thickness variation in electrophotographic process

This paper proposes a new belt drive control method for reducing a belt velocity-fluctuation that is caused by a belt thickness-variation in the circumferential direction. A belt driving system performs feedback control with a rotary encoder-output mounted on a driven roller. This proposed method correct the reference value of the feedback control for the purpose of the belt velocity regulation. The correction includes two steps. The first step acquires the encoder-output of the driven roller and calculates the rotational angular velocity-fluctuation with one cycle of the belt rotation. The second step converts from the velocity-fluctuation to the correction value of the feedback reference. The correction value cancels a detection error of the driven roller caused by the belt thickness-variation. After these steps, the belt driving system controls the belt velocity as compensating the belt velocity-fluctuation. Experimental result showed the significant fluctuation reduction on a typical tandem-engine printer.     

0.5-μm 3.3-V BiCMOS standard cells with 32-kilobyte cache andten-port register file

BiCMOS standard cell macros, including a 0.5-W 3-ns register file, a 0.6-W 5-ns 32-kbyte cache, a 0.2-W 3-ns table look-aside buffer (TLB), and a 0.1-W 3-ns adder, are designed with a 0.5-μm BiCMOS technology. A supply voltage of 3.3 V is used to achieve low power consumption. Several BiCMOS/CMOS circuits, such as a self-aligned threshold inverter (SATI) sense amplifier and an ECL HIT logic are used to realize high-speed operation at the low supply voltage. The performance of the BiCMOS macros is verified using a fabricated test chip     

Effects of glucose load on brain extracellular lactate concentration in conscious rats using a microdialysis technique

Changes in the brain lactate concentration in cerebral extracellular fluid (ECF) during intravenous infusion of glucose and local administration of glucose were investigated in adult, conscious, unrestrained rats, with a microdialysis probe in the posterior hippocampus. The rats were infused intravenously with either 25% sucrose solution or 25% glucose solution at a rate of 16.6 microliters.min-1.100 g-1 for three hours. The blood glucose concentration reached 17.0 +/- 2.6 mM at the end of the glucose infusion, and brain ECF glucose showed a parallel change with the blood glucose concentration and increased to 2.37 +/- 0.30 mM. However, blood and brain ECF glucose concentrations did not change in animals infused with the sucrose solution. On the other hand, the blood lactate concentration in the glucose-infused group also increased from 0.93 +/- 0.18 mM to 2.85 +/- 0.39 mM at the end of the glucose infusion, which was significantly higher than that measured in the sucrose-infused group. The blood lactate level in the glucose-infused group returned to the basal level by the end of the experiment. Brain ECF lactate concentrations increased from 1.21 +/- 0.06 mM to 1.69 +/- 0.11 mM in glucose-infused animals, but did not change in the sucrose-infused animals. The brain ECF lactate concentration showed a positive correlation with the brain ECF glucose concentration in glucose-infused animals. Another group of rats was administered glucose locally for 90 min after substitution of artificial cerebrospinal fluid.(ABSTRACT TRUNCATED AT 250 WORDS)