Performance prediction of a hybrid‐excitation synchronous machine with axially arranged excitation poles and permanent‐magnet poles

This paper presents a method of predicting the steady‐state performance of a new hybrid‐excitation synchronous machine (HESM) theoretically. The field pole of this HESM is axially divided into two parts; one is an excitation part and the other a permanent‐magnet (PM) part. A nonlinear equivalent circuit, which can include the saliency of the rotor and the magnetic saturation due to the iron core, is derived. Based on this equivalent circuit, the steady‐state performance of the HESM is calculated, and the results are confirmed through experiments. © 2004 Wiley Periodicals, Inc. Electr Eng Jpn, 150(2): 43–49, 2005; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20033     

Remote detection of a tonal anomaly in an area of hydrocarbon microseepage,Tucano basin,north-eastern Brazil

Mapping of a tonal anomaly in an area of hydrocarbon microseepage was possible using a Landsat-Thematic Mapper false-colour composite consisting of TM2/3, TM4/3 and of the difference TM2/3-TM4/3, displayed as red, green and blue, respectively. In this false-colour composite, green and yellow express variations in the vegetation cover, whereas hues of magenta are related to terrain conditions representing bleached materials, which occur close to the centre of a soil gas anomaly. Simultaneous occurrence of anomalous soil gas values with magnetic and radioactive minerals suggests that a reducing environment associated with the microseepage phenomenon created the bleached materials, identified as a tonal anomaly in the enhanced TM image.     

A 76-mm2 8-Mb chain ferroelectric memory

This paper demonstrates the first 8-Mb chain ferroelectric RAM (chain FeRAM) with 0,25-μm 2-metal CMOS technology. A small die of 76 mm² and a high average cell/chip area efficiency of 57.4 % have been realized by introducing not only chain architecture but also four new techniques: 1) a one-pitch shift cell realizes small cell size of 5.2 μm²; 2) a new hierarchical wordline architecture reduces row-decoder and plate-driver areas without an extra metal layer; 3) a small-area dummy cell scheme reduces dummy capacitor size to 1/3 of the conventional one; and 4) a new array activation scheme reduces dataline and second amplifier areas. As a result, the chain architecture with these new techniques reduces die size to 65% of that of the conventional FeRAM. Moreover a ferroelectric capacitor overdrive scheme enables sufficient polarization switching, without overbias memory cell array. This scheme lowers the minimum operation voltage by 0.23 V, and enables 2.5-V V_dd operation. Thanks to fast cell plateline drive of chain architecture, the 8-Mb chain FeRAM has achieved the fastest random access time, 40 ns, and read/write cycle time, 70 ns, at 3.0 V so far reported     

Novel Components of the Sex Pheromones Produced by Emerald Moths: Identification,Synthesis, and Field Evaluation

The subfamily Geometrinae (Lepidoptera: Geometridae) includes many species called emerald moths. Based on our recent finding of novel polyenyl compounds, including a double bond at the 12-position from two geometrine species, Hemithea tritonaria and Thalassodes immissaria intaminata, (6Z,9Z,12Z)-6,9,12-trienes and (3Z,6Z,9Z,12Z)-3,6,9,12-tetraenes with a C₁₇–C₂₀ straight chain were synthesized and analyzed by GC-MS. The 6,9,12-trienes, which were prepared by a double Wittig reaction between two alkanals and an ylide derived from (Z)-1,6-diiodo-3-hexene, characteristically produced fragment ions at m/z 79, 150, and M–98. The 3,6,9,12-tetraenes, which were prepared by a coupling between (Z)-3-alkenal and an ylide derived from (3Z,6Z)-1-iodo-3,6-nonadiene, showed fragment ions at m/z 79, 148, and M–96. These diagnostic ions were useful to distinguish these compounds from other known polyenyl pheromones, such as 4,6,9- and 6,9,11-trienes and 1,3,6,9-tetraenes. With reference to the GC-MS data, pheromone extracts of other species in Geometrinae inhabiting the Iriomote Islands were analyzed, and the 6,9,12-trienes were identified in the pheromone gland extracts of Pamphlebia rubrolimbraria rubrolimbraria and Maxates versicauda microptera. Furthermore, a field evaluation of the synthetic polyenes in a mixed forest of Tokyo revealed the following new male attractants for emerald moths: Idiochlora ussuriaria by a C₁₇ 6,9,12-triene and Jodis lactearia by a C₂₀ 3,6,9,12-tetraene, indicating the characteristic chemical structures of Geometrinae pheromones. On the other hand, through reexamination of the pheromone extract of H. tritonaria, (3E,6E)-α-farnesene was identified as an electrophysiologically active component in addition to the C₁₇ 6,9,12-triene. The binary mixture attracted more males than the single component lure baited with the triene in the Iriomote Islands.     

Morphological study by TEM on uniaxially oriented thin films of PET, PEN and their blends

Uniaxially oriented thin films of poly(ethylene terephthalate) (PET), poly(ethylene 2,6-naphthalene dicarboxylate) (PEN) and their blends were prepared by applying shear strain to their respective melts, and the resulting morphologies were studied by transmission electron microscopy. Selected-area electron diffraction of each film revealed well-defined uniaxial orientation of polymer chains in the shearing direction. In the uniaxially oriented thin film of PEN, stacked-lamellar structure with the average long period of 27 nm consisting of a crystalline region about 15 nm thick and an amorphous one about 12 nm thick was found here and there in the dark-field image: PEN-type. On the other hand, stacked-lamellar structure was rarely observed in the case of PET: PET-type. In PET/PEN blends, the morphologies changed from the PET-type to the PEN-type with increasing content of PEN.     

Secondary Resistance Identification of an Induction-Motor Applied Model Reference Adaptive System and Its Characteristics

Induction-motor torque is not accurately controlled when the estimated secondary resistance of an induction-motor model in a vector controller differs from the true secondary resistance. An algorithm which identifies the secondary resistance on-line is developed. The motor operating condition for secondary resistance identification, the stable identifier organization, and the experimental investigation confirming the identification algorithm performance are presented. The algorithm is based on the theory of model reference adaptive systems (MRAS). The proposed algorithm stably identifies the secondary resistance under any load and any speed when a sinusoidal signal is injected into the flux axis primary current. The vector controller adopting this algorithm controls motor torque accurately under any load and any speed.     

Structural development of natural rubber during uniaxial stretching by in situ wide angle X-ray diffraction using a synchrotron radiation

Structural development of natural rubber during uniaxial stretching was examined by an in situ wide angle X-ray diffraction measurement using a synchrotron. During stretching, the amorphous part showed little change, i.e. an amorphous halo remained clear even at 500% strain. The fraction of induced crystals was very small, though a clear crystalline pattern was observed at 400% strain. Some polymer chains were oriented and crystallized, but most of the chains were not oriented at all in spite of large deformations of the specimen. Only a small amount of polymer chains contributes to the stress and hysteresis loss during elongation.     

A kinetic investigation of thermally initiated emulsion copolymerization of styrene and methylmethacrylate without conventional initiators

The thermally initiated emulsion copolymerization of styrene (ST) and methyl methacrylate (MMA) was carried out in the absence of conventional initiators. The hydroperoxide (HPO) concentration in the monomers, sodium dodecyl sulfate (SDS), deionized water, and the formulation of those for emulsion copolymerization were measured. The HPO concentration in ST and MMA increased with the storage time, and were considered to be the major sources of HPO. The thermal decomposition of hydroperoxide in monomers, the thermal initiation of ST by Mayo mechanism, and the complex formation between SDS and the monomers were proposed to be three main sources of the radical generation. It was confirmed that new polymer particles were generated throughout the polymerization process, and consequently resulted in a broader distribution of polymer particle size, compared with that for conventional emulsion polymerization. Approximately 80 wt % of monomer conversion was obtained in the presence of SDS at 373 K in 24 h. The initiation rate of the 30 wt % monomer charge was faster than those of 10 wt % and 20 wt % monomer charge. The latex instability at higher solid content was improved by adding electrolyte to promote the electrostatic repulsion force between the polymer particles. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 455–467, 2002; DOI 10.1002/app.2343     

具有硬核—软壳结构的丙烯酸聚合物乳液的研究

利用种子乳液聚合法合成了具有硬核—软壳结构的丙烯酸聚合物微粒子,通过对种子粒子数和最终粒子数的理论计算,并结合最低成膜温度(MFT)的测试结果,描述了聚合物微粒子的聚合过程,同时,还对聚合物乳液的各项性能进行了研究。