A comparative evaluation of low-cycle fatigue behavior of type 316LN base metal, 316 weld metal,and 316LN/316 weld joint

A comparative evaluation of the low-cycle fatigue (LCF) behavior of type 316LN base metal, 316 weld metal, and 316LN/316 weld joints was carried out at 773 and 873 K. Total strain-controlled LCF tests were conducted at a constant strain rate of 3 × 10⁻³ s⁻¹ with strain amplitudes in the range ±0.20 to ±1.0 pct. Weld pads with single V and double V configuration were prepared by the shielded metal-arc welding (SMAW) process using 316 electrodes for weld-metal and weld-joint specimens. Optical microscopy, scanning electron microscopy (SEM), and transmission electron microscopy (TEM) of the untested and tested samples were carried out to elucidate the deformation and the fracture behavior. The cyclic stress response of the base metal shows a very rapid hardening to a maximum stress followed by a saturated stress response. Weld metal undergoes a relatively short initial hardening followed by a gradual softening regime. Weld joints exhibit an initial hardening and a subsequent softening regime at all strain amplitudes, except at low strain amplitudes where a saturation regime is noticed. The initial hardening observed in base metal has been attributed to interaction between dislocations and solute atoms/complexes and cyclic saturation to saturation in the number density of slip bands. From TEM, the cyclic softening in weld metal was ascribed to the annihilation of dislocations during LCF. Type 316LN base metal exhibits better fatigue resistance than weld metal at 773 K, whereas the reverse holds true at 873 K. The weld joint shows the lowest life at both temperatures. The better fatigue resistance of weld metal is related to the brittle transformed delta ferrite structure and the high density of dislocations at the interface, which inhibits the growth rate of cracks by deflecting the crack path. The lower fatigue endurance of the weld joint was ascribed to the shortening of the crack initiation phase caused by surface intergranular crack initiation and to the poor crack propagation resistance of the coarse-grained region in the heat-affected zone.     

Predictive models for multibiometric systems

Recognizing a subject given a set of biometrics is a fundamental pattern recognition problem. This paper builds novel statistical models for multibiometric systems using geometric and multinomial distributions. These models are generic as they are only based on the similarity scores produced by a recognition system. They predict the bounds on the range of indices within which a test subject is likely to be present in a sorted set of similarity scores. These bounds are then used in the multibiometric recognition system to predict a smaller subset of subjects from the database as probable candidates for a given test subject. Experimental results show that the proposed models enhance the recognition rate beyond the underlying matching algorithms for multiple face views, fingerprints, palm prints, irises and their combinations.     

Subspace filtering approach based on orthogonal projection for better analysis of stressed speech under clean and noisy environments

This study explores a novel subspace projection-based approach for analysis of stressed speech. Studies have shown that stress influences the speech production system and it results in a large acoustic variation between the neutral and the stressed speech. This degrades the discrimination capability of an automatic speech recognition system trained on neutral speech when tested on stressed speech. An effort is made to reduce the acoustic mismatch by explicitly normalizing the stress-specific attributes. The stress-specific divergences are normalized by exploiting the subspace filtering technique. To accomplish this, an orthogonal projection based linear relationship between the speech and the stress information has been explored to filter an effective speech subspace, which consists of speech information. Speech subspace is constructed using K-means clustering followed by singular value decomposition method using neutral speech data. The speech and the stress information are separated by projecting the stressed speech orthogonally onto an effective speech subspace. Experimental results indicate that, the bases of an effective subspace comprises the first few eigenvectors corresponding to the highest eigenvalues. To further improve the system performance, both the neutral and the stressed speech are projected onto the lower dimensional subspace. The projections derived using the neutral speech employs heteroscedastic linear discriminant analysis in maximum likelihood linear transformations-based semi-tied adaptation framework. Consistent improvements are noted for the proposed technique in all the discussed cases.     

Analytical error analysis of Clifford gates by the fault-path tracer method

We estimate the success probability of quantum protocols composed of Clifford operations in the presence of Pauli errors. Our method is derived from the fault-point formalism previously used to determine the success rate of low-distance error correction codes. Here we apply it to a wider range of quantum protocols and identify circuit structures that allow for efficient calculation of the exact success probability and even the final distribution of output states. As examples, we apply our method to the Bernstein–Vazirani algorithm and the Steane [[7,1,3]] quantum error correction code and compare the results to Monte Carlo simulations.     

Adaptive target recognition

Target recognition is a multilevel process requiring a sequence of algorithms at low, intermediate and high levels. Generally, such systems are open loop with no feedback between levels and assuring their performance at the given probability of correct identification (PCI) and probability of false alarm (Pf) is a key challenge in computer vision and pattern recognition research. In this paper, a robust closed-loop system for recognition of SAR images based on reinforcement learning is presented. The parameters in model-based SAR target recognition are learned. The method meets performance specifications by using PCI and Pf as feedback for the learning system. It has been experimentally validated by learning the parameters of the recognition system for SAR imagery, successfully recognizing articulated targets, targets of different configuration and targets at different depression angles.     

Cholesterol is critical to the integrity of neuronal porosome/fusion pore

Secretion is one of the most fundamental cellular processes. Porosomes have been demonstrated as the universal secretory machinery in cells. Earlier studies determine the presence of a number of proteins in porosomes, among them the N- and P/Q-type calcium channels, actin, syntaxin-1, synaptotagmin-1, vimentin, the N-ethylmaleimide-sensitive factor (NSF), the chloride channel CLC-3, and the alpha subunit of the heterotrimeric GTP-binding protein G(o). Studies demonstrate that t-SNAREs localize at the base of porosomes, and directly interact with calcium channels. In the present study, we demonstrate that Syntaxin-1 co-localizes with cholesterol in solubilized synaptosomal membrane preparations. Depletion of cholesterol, results in the dissociation of both Syntaxin-1 and N-type calcium channel from neuronal porosomes. Thus, cholesterol participates as an integral component of the neuronal porosome complex, and is required for its stability.     

Fingerprint indexing based on novel features of minutiae triplets

We are concerned with accurate and efficient indexing of fingerprint images. We present a model-based approach, which efficiently retrieves correct hypotheses using novel features of triangles formed by the triplets of minutiae as the basic representation unit. The triangle features that we use are its angles, handedness, type, direction, and maximum side. Geometric constraints based on other characteristics of minutiae are used to eliminate false correspondences. Experimental results on live-scan fingerprint images of varying quality and NIST special database 4 (NIST-4) show that our indexing approach efficiently narrows down the number of candidate hypotheses in the presence of translation, rotation, scale, shear, occlusion, and clutter. We also perform scientific experiments to compare the performance of our approach with another prominent indexing approach and show that the performance of our approach is better for both the live scan database and the ink based database NIST-4.     

Comparative evaluation of strain controlled low cycle fatigue behaviour of solution annealed and prior cold worked 316L(N) stainless steel

The effect of 20% prior cold work on low cycle fatigue (LCF) behaviour of type 316L(N) stainless steel (SS) was studied at 873 K by conducting total axial strain controlled tests in air with strain amplitudes in the range ±0.25% to ±1.0%. The cyclic deformation behaviour of 20% prior cold worked (PCW) material was compared with the LCF response of solution annealed (SA) alloy tested under similar conditions. The cyclic stress response (CSR) of 316L(N) SS in the PCW condition was characterized by a short period of hardening followed by prolonged softening prior to failure, whereas SA material exhibited a significant hardening regime followed by stress saturation. Interrupted tests on PCW material were carried out at different stages of CSR in order to determine the underlying mechanisms as reflected in substructural changes. The fatigue life in the solution annealed condition was similar to that of the PCW material at higher strain amplitudes of testing (≥±0.5%) while at lower strain amplitudes, the PCW material exhibited longer life.     

High-temperature flexural strength of I-CVI processed Cf/SiC composites with variable interphases

The effect of single-layer pyrocarbon (PyC) and multilayered (PyC/SiC)_n=4 interphases on the flexural strength of un-coated and SiC seal-coated stitched 2D carbon fiber reinforced silicon carbide (C_f/SiC) composites was investigated. The composites were prepared by I-CVI process. Flexural strength of the composites was measured at 1200 °C in air atmosphere. It was observed that irrespective of the type of interphase, the seal coated samples showed a higher value of flexural strength as compared to the uncoated samples. The flexural strength of 470 ± 12 MPa was observed for the seal coated C_f/SiC composite samples with multilayered interphase. The seal coated samples with single layer PyC interphase showed flexural strength of 370 ± 20 MPa. The fractured surfaces of tested samples were analyzed in detail to study the fracture phenomena. Based on microstructure-property relations, a mechanism has been proposed for the increase of flexural properties of C_f/SiC composites having multilayered interphase.