Interface Characteristics and Laboratory Constructability Tests of Novel Fiber-Reinforced Polymer/Concrete Piles

Conventional pile materials such as steel, concrete, and timber are prone to deterioration for many reasons. Fiber-reinforced polymer (FRP) concrete composites represent an alternative construction material for deep foundations that can eliminate many of the performance disadvantages of traditional piling materials. However, FRP composites present several difficulties related to constructability, and the lack of design tools for their implementation as a foundation element. This paper describes the results of an experimental study on frictional FRP/dense sand interface characteristics and the constructability of FRP–concrete composite piles. An innovative toe driving technique is developed to install the empty FRP shells in the soil and self-consolidating concrete is subsequently cast in them. The experimental program involves interface shear tests on small FRP samples and uplift load tests on large-scale model piles. Two different FRP pile materials with different roughness and a reference steel pile are examined. Static uplift load tests are conducted on different piles installed in soil samples subjected to different confining pressures in the pressure chamber. The results showed that the interface friction for FRP materials compared favorably with conventional steel material. It was shown that toe driving is suitable for installation of FRP piles in dense soils.     

Selective Recovery of Cadmium,Cobalt, and Nickel from Spent Ni–Cd Batteries Using Adogen® 464 and Mesoporous Silica Derivatives

Spent Ni–Cd batteries are now considered an important source for many valuable metals. The recovery of cadmium, cobalt, and nickel from spent Ni–Cd Batteries has been performed in this study. The optimum leaching process was achieved using 20% H₂SO₄, solid/liquid (S/L) 1/5 at 80 °C for 6 h. The leaching efficiency of Fe, Cd, and Co was nearly 100%, whereas the leaching efficiency of Ni was 95%. The recovery of the concerned elements was attained using successive different separation techniques. Cd(II) ions were extracted by a solvent, namely, Adogen^® 464, and precipitated as CdS with 0.5% Na₂S solution at pH of 1.25 and room temperature. The extraction process corresponded to pseudo-2nd-order. The prepared PTU-MS silica was applied for adsorption of Co(II) ions from aqueous solution, while the desorption process was performed using 0.3 M H₂SO₄. Cobalt was precipitated at pH 9.0 as Co(OH)₂ using NH₄OH. The kinetic and thermodynamic parameters were also investigated. Nickel was directly precipitated at pH 8.25 using a 10% NaOH solution at ambient temperature. FTIR, SEM, and EDX confirm the structure of the products.     

Adsorption of U(Ⅵ) from acid solution on a low-cost sorbent:equilibrium,kinetic, and thermodynamic assessments

In this paper, waste clay was cured with ethyl acetate to obtain treated clay(TC), which was modified with gallic acid to obtain a low-cost sorbent that was characterized by EDX, SEM, and FTIR analysis. Uranium(Ⅵ) adsorption was achieved using the batch adsorption method on the TC and gallic acid-modified treated clay(GMTC). The maximum uptakes of U(Ⅵ) on TC and GMTC were 37.2 and 193.0 mg/g, respectively.The U(Ⅵ) adsorption kinetics on the TC and GMTC sorbents were well-fitted by the pseudo-second-order mechanism, and the adsorption equilibrium followed the Langmuir model. The optimum parameters were applied to El Sela leach solution for uranium recovery.     

Synthesis and biodistribution of 99m Tc-PyDA as a potential marker for tumor hypoxia imaging

The ^99m Tc-pyrimidine-4,5-diamine (^99m Tc-PyDA) complex was prepared. The yield under the optimum conditions (5 mg of PyDA, pH 8, 25 μg of SnCl₂·2H₂O) was 96 ± 3%. The complex is stable in vitro for 24 h. The complex was tested on mice as potential marker for tumor hypoxia imaging. The complex showed high tumor hypoxia uptake with the target/nontarget (T/NT) ratio as high as ～3.     

On business process monitoring using cross-flow coordination

This paper presents an approach for monitoring the execution progress of business processes. The monitoring focuses on the exceptions that could arise during this execution and, hence, could make the processes fail if not handled properly and timely. The approach relies on three flows known as control, communication, and navigation. The control flow connects tasks together with respect to a certain business logic. The communication flow captures the messages exchanged between persons/machines when they perform tasks of processes. Finally, the navigation flow captures the interactions between specialized networks that offer solutions to exceptions. These networks are built upon relations between tasks, between persons, and between machines. The coordination of control, communication, and navigation flows focuses on both the actions that are taken and the messages that are exchanged when handling exceptions. A system demonstrating flow development and coordination is, also, presented in the paper.     

Impedance spectroscopy properties of polypyrrole doped with boric acid

The electrical conductivity and dielectric properties of polypyrrole doped with boric acid have been investigated. The direct current conductivity (dc) of the polymer increases with increasing temperature. The alternating current (ac) conductivity of the polymer obeys the power law, i.e., σ_ac(ω) = Aω^s. The alternating conductivity of polypyrrole doped with boric acid is controlled by the correlated barrier hopping model. The activation energy for alternating current mechanism decreases with increasing frequency which confirms the hopping conduction to the dominant mechanism as compared with the dc activation energy. The density of localized states N(E_F) for polypyrrole doped with boric acid was in the range of 2.5–9.2 × 10²² cm^?3 for various temperatures. The dielectric relaxation mechanism was explained on the basis of complex dielectric modulus. The imaginary modulus plot at different temperatures shows a dielectric mechanism with non-Debye relaxation. Boric acid can be a good candidate for controlling the electrical conductivity of the conducting polymer.     

Evaulation of irritation potential of surfactant mixtures

Irritation potential of sodium laureth sulfate (SLES) alone, and in combination with lauryl glucoside (LG), polysorbate 20 (PS) and cocoamidopropyl betaine (CAPB) was tested in 13 human subjects. Four main and six sub-formulations were prepared and evaluated. Formulations were applied to the forearm as a 24 h close patch study. Irritation was scored by two different methods using an in vivo clinical protocol based on visual scoring and on the stratum corneum capacitance measurement. Irritation was found to be dose dependent. At 2 mg/patch level ten subjects did not show any skin reaction. At 20 mg/patch level eleven subjects showed a broad range of skin irritation. The highest irritation was observed with the formula that contained SLES, LG, and cocamide DEA together. Among the sub-formulations, cocamide DEA showed the highest irritation grade. A statistically significant correlation was observed between visual, clinical and corneometer scores. It was concluded that the irritation potential of surfactants was related to the total surfactant concentration, application mode, and the thermodynamic activity of molecules in the solution as well as the chemical structure of the surfactant molecules.     

Comparison studies between cement and cement-kaolinite properties for incorporation of low-level radioactive wastes

Comparison between the properties of cement and cement mixed with 7.5% kaolinite was performed to choose the most suitable matrix to incorporate radio-active wastes. The cement-kaolinite mixtures were prepared as uncured, cured, and heated specimens. The physical properties of the cement-kaolinite mixture, namely density, porosity, and water absorption percent, were determined. Compressive strength, infrared spectra, thermal analysis, and the effect of gamma rays on the samples were studied. The studies were extended to the cement-kaolinite mixture in the presence of some chemical additives at different concentrations. Leachability of radioactive isotopes from the cement-kaolinite mixture was measured as a function of time. The physical and mechanical properties of cement were decreased in the presence of 7.5% kaolinite, whereas ¹³⁷Cs and ⁶⁰Co were less leached from the cement-kaolinite mixture.     

The impact of sorption on perceived indoor air quality

Sensory evaluations were used to investigate the impact of sorption processes on indoor air quality. Experiments were carried out in four similar, adjacent, unfurnished offices. Samples of carpet, linoleum, painted gypsum board, and Semia (a specially designed high-sorbing fabric) were tested individually and in combination. Additionally, to investigate the interaction between the pollutants emitted from the building materials and the test room surfaces themselves, air streams polluted by two different building materials were vented into an empty test office. Each experiment lasted for either 1 week (adsorption stage only) or 10 days (adsorption and desorption stages). Untrained panels assessed the air quality at specified times after moving the materials into or out of the rooms. The results showed that, in comparison with air in a room with carpet or linoleum alone, the presence of painted gypsum board improved the perceived air quality. This improvement persisted throughout the 168 h of the 'adsorption stage' of the experiments. A mass balance model was used to quantify the improvement. Calculated results indicate that, for the conditions used in these experiments, pollutant removal via sorption to the relatively inert office surfaces was equivalent to an extra 0.4 air change per hour (ACH) of ventilation air, while sorption to painted gypsum board surfaces was equivalent to an extra 1-7 ACH of ventilation air. In the case of Semia, sorption was equivalent to an extra 16 ACH of ventilation air. During the 'desorption stage' of the experiments, after carpet or linoleum were taken out of a room, approximately 3 days were required before the air in the test office, ventilated at 0.8 ACH, was judged to be free of the sorbed pollutants. PRACTICAL IMPLICATIONS: Ventilation rates in non-industrial buildings are based largely on sensory pollution sources and a desired level of perceived air quality. This study documents that sorptive materials in a room influence the perceived air quality and should be considered when evaluating ventilation requirements. Indeed, it may be possible to deliberately use sorption/desorption to improve indoor air in a manner analogous to the way thermal storage/release is currently used in buildings as a means of conserving energy.     

Sensory profiles and preference analysis in ornamental horticulture: The case of the rosebush

The context of ornamental horticulture is considered in order to extend the techniques of sensory and preference evaluation by taking the rosebush as a plant model. In a preliminary study (Boumaza, Demotes-Mainard, Huché-Thélier, & Guérin, 2009), a sensory evaluation was conducted in order to set up a list of attributes. Subsequently, this list was adapted to assess 10 rosebushes. After the control of the panel performance using a multivariate strategy of analysis, the average scores were used in product mapping. The evaluation of the preferences with regard to these rosebushes was undertaken: 253 subjects were asked to rank the products by decreasing order of liking. Thereafter, the preference data were subjected to an internal preference mapping and a cluster analysis. Six homogeneous segments of consumers were eventually retained. By way of performing an external preference mapping, the average ranks were regressed upon the sensory attributes using principal component regression: the preferences of 67% of the consumers were satisfactorily explained by the attributes.