Accurate estimation of capacities and cross-traffic of all links in a path using ICMP timestamps

The estimation of the link capacity and its available bandwidth in an end-to-end path is crucial for network management, admission control and flow control for adaptive applications. This paper introduces an estimation mechanism able to accurately estimate the available bandwidth of all links in an end-to-end path, through its capacity and cross-traffic estimation. The estimation procedures resort to the dispersions of packet pairs and trains using the concepts of ICMP Timestamp and Traceroute that, efficiently used together, enable the measurement of the dispersions in all links in the path. These mechanisms were evaluated through simulation experiments, where we analyzed the influence of the several network parameters on each estimation mechanism. The results show that these estimation methods are able to accurately estimate both the capacity and the cross-traffic of all links in a path with moderate length and with low overhead.     

Atmospheric corrosion of reference metals in Antarctic sites

This paper presents the results obtained at three Antarctic test sites participating in the “Ibero-American Map of Atmospheric Corrosiveness” (MICAT), a project on atmospheric corrosion carried out during the period 1988–1994 at some 70 sites distributed across 12 countries of the Latin-American region, Spain and Portugal. The three Antarctic sites are located near the coastline.The singular climatic characteristics of Antarctic regions are related with the purity of the air, the absence of rainfall and the formation of ice on the metallic surface during an important part of the exposure time. However, electrochemical activity is possible below ice layers. This situation affects the structure and morphology of corrosion product films and the resulting corrosion rates of metallic surfaces.     

Mechanical improvement of concrete by irradiated polypropylene fibers

Fiber reinforced concrete (FRC) contains fibers physically mixed with gravel, sand, cement, and water. So far, adequate mechanical performance of FRC has been obtained at high cost and using complex technologies; important here is the geometry and surface characteristics of the polymers. We have modified polymeric‐fiber surfaces by using gamma radiation. Irradiated polypropylene (PP) fibers were submitted to 0, 5, 10, 50, and 100 kGy of gamma irradiation dosages. First, tensile strength of PP fibers was evaluated, and then fibers blended at 0, 1.0, 1.5, and 2.0% in volume with Portland cement, gravel, sand, and water. The highest values of compressive strength were obtained with irradiated‐fibers at 10 kGy and 1.5% in volume of fiber. The result is 101 MPa, as compared to 35 MPa for simple concrete without fibers. POLYM. ENG. SCI., 45:1426–1431, 2005. © 2005 Society of Plastics Engineers     

Age of acquisition: Its neural and computational mechanisms.

The acquisition of new skills over a life span is a remarkable human ability. This ability, however, is constrained by age of acquisition (AoA); that is, the age at which learning occurs significantly affects the outcome. This is most clearly reflected in domains such as language, music, and athletics. This article provides a perspective on the neural and computational mechanisms underlying AoA in language acquisition. The authors show how AoA modulates both monolingual lexical processing and bilingual language acquisition. They consider the conditions under which syntactic processing and semantic processing may be differentially sensitive to AoA effects in second-language acquisition. The authors conclude that AoA effects are pervasive and that the neural and computational mechanisms underlying learning and sensorimotor integration provide a general account of these effects. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Do individual factors matter? A survey of scientists’ patenting in Portuguese public research organisations

This paper addresses scientists’ behaviour regarding the patenting of knowledge produced in universities and other public sector research organisations (PSROs). Recent years have witnessed a rapid growth in patenting and licensing activities by PSROs. We argue that the whole process depends to a certain extent on scientists’ willingness to disclose their inventions. Given this assumption, we conduct research into individual behaviour in order to understand scientists’ views concerning the patenting of their research results. Data from a questionnaire survey of Portuguese researchers from nine PSROs in life sciences and biotechnology is presented and analysed and complemented with in-depth interviews. The results reveal that overall the scientists surveyed show a low propensity to become involved in patenting and licensing activities, despite the fact that the majority had no “ethical” objections to the disclosure of their inventions and the commercial exploitation of these. Perceptions about the impacts of these activities on certain fundamental aspects of knowledge production and dissemination are however divergent. This may account for the low participation levels. Furthermore, most scientists perceived the personal benefits deriving from this type of activity to be low. Similarly, the majority also believed that there are many difficulties associated with the patenting process and that they receive limited support from their organisations, which lack the proper competences and structures to assist with patenting and licensing.     

Experiments of Fast Learning with High Order Boltzmann Machines

This work reports the results obtained with the application of High Order Boltzmann Machines without hidden units to construct classifiers for some problems that represent different learning paradigms. The Boltzmann Machine weight updating algorithm remains the same even when some of the units can take values in a discrete set or in a continuous interval. The absence of hidden units and the restriction to classification problems allows for the estimation of the connection statistics, without the computational cost involved in the application of simulated annealing. In this setting, the learning process can be sped up several orders of magnitude with no appreciable loss of quality of the results obtained.     

Medium and substitution pattern effects on the action of hydroxyflavones as photoprotectors against singlet molecular oxygen-mediated photooxidation of fats

The ability of mono-, di-, tri-and tetra-hydroxyflavones (7-and 3-hy-droxyflavones, 7, 8-dihydroxyflavone, baicalein and fisetin) to act as photoprotectors against singlet molecular oxygen [O²(Δ_g)]-initiated photooxidation of fats has been established by a kinetic study. The overall quenching rate constants for a series of five hydroxyflavones perfectly parallel their respective behaviour as inhibitors of the sensitized photooxidation of linoleic acid. The best antioxidative effect was exerted by 7-hydroxyflavone which does not chemically react with O²(¹Δ_g). Nevertheless for the remaining flavonoids of the series, the physical deactivation of O²(¹Δ_g) largely prevails over the chemical process. As for the cases of phenols and related hydroxy-aromatic derivatives, the ionization of the -OH group in the flavones, dramatically accelerates the rate of photooxidation. Under these conditions, the 7-hydroxyflavone also reacts effectively with O²(¹Δ_g). Given that flavonoids are natural oil components, this medium effect should be taken into account during the oil-refining process, in order to avoid the flavonoid photodestruction.     

2-Hydroxypropyl-beta-cyclodextrin enhances phorbol ester effects on glucose transport and/or protein kinase C-beta translocation to the plasma membrane in rat adipocytes and soleus muscles

In rat adipocytes and soleus muscles, 2-hydroxypropyl-beta-cyclodextrin (CD) was found to have a relatively small or no effect on basal or insulin-stimulated hexose uptake, but markedly enhanced hexose uptake effects of phorbol esters and/or diacylglycerol. In rat adipocytes, the CD-induced enhancement of hexose uptake during concurrent phorbol ester treatment was not associated with an increase in GLUT4 glucose transporter translocation to the plasma membrane, which was stimulated comparably by insulin and phorbol esters. Moreover, CD appeared to activate or facilitate the activation of glucose transporters subsequent to their translocation to the plasma membrane during ongoing phorbol ester treatment. In rat adipocytes, CD also enhanced the translocation of protein kinase C (PKC)-beta to the plasma membrane during the action of phorbol esters, which alone had little or no effect on this specific PKC translocation. Although it is uncertain how CD alters the function of plasma membranes to enhance the translocation of PKC-beta to, and the activation of glucose transporters within, this subcellular fraction during phorbol ester treatment, our findings provide direct support for a two-step model in the activation of glucose transport. In addition, it seems clear that, at least in some cell types, simple phorbol ester treatment does not necessarily serve as a ubiquitous activator of all activable PKC pools and all potential PKC-mediated responses.     

Electrical heat tracing: international harmonization-now and in thefuture

In the past, electrical heat tracing has been thought of as a minor addition to plant utilities. Today, it is recognized as a critical subsystem to be monitored and controlled. A marriage between process, mechanical, and electrical engineers must take place to ensure that optimum economic results are produced. The Internet, expert systems, and falling costs of instrumentation will all contribute to more reliable control systems and improved monitoring systems. There is a harmonization between Europe and North America that should facilitate design and installation using common components. The future holds many opportunities to optimize the design     

Controlled-Release Matrix of Acetaminophen-Ethylcellulose Solid Dispersion

In this study ethylcellulose was evaluated as a carrier for preparation of prolonged release acetaminophen tablets. Solid dispersions containing three levels of ethylcellulose and acetaminophen (1:3; 1:1; 3:1) were prepared by the solvent method. Also physical mixtures at the same level of ethylcellulose and acetaminophen were prepared. Systems composed of solid dispersion or physical mixture containing the equivalent weight of 50 mg acetaminophen, Lactose fast-flo as diluent and 1% magnesium stearate as lubricant were compressed into tablets and tested for dissolution. The dissolution data showed that the drug release decreased as the level of ethylcellulose increased in the solid dispersion formulations. The drug release from tablets prepared with solid dispersion followed the diffusion controlled model for inert porous matrix, while the drug release from tablets prepared with physical mixture followed the first-order kinetic model.